Synthesis and characterization of molybdenum (VI) complex immobilized on polymeric Schiff base-coated magnetic nanoparticles as an efficient and retrievable nanocatalyst in olefin epoxidation reactions

In this study, a new polymeric functionalized magnetic nanocatalyst containing a molybdenum Schiff base complex was prepared using a few consecutive steps. Poly (methylacrylate)-coated magnetic nanoparticles were synthesized via radical polymerization of methyl acrylate onto modified magnetic nanoparticles followed by the amidation of the methyl ester groups with hydrazine. Polymeric functionalization efficiently provides the advantage that more catalytic units can be grafted on the surface of magnetic nanoparticles. The functionalization process was continued with salicylaldehyde which introduced Schiff base groups on to the surface of the polymeric support. In the final step, the desired catalytic system was prepared via complexation of the Schiff base groups with MoO₂(acac)₂. The resulting nanoparticles were characterized by infrared spectroscopy, powder X-ray diffraction, scanning and transmission electron microscopy, elemental analysis, inductively coupled plasma optical emission spectrometry, vibrating sample magnetometry and thermogravimetric analysis. This heterogenized catalytic system was also found to be highly active, sustainable and recyclable nanocatalyst in alkene epoxidation. Eventually, the attractive features of the synthesized catalyst such as simple work-up, good stability, magnetic separation, high TOF and high surface area; make it appropriate for oxidation reactions.     

Development and characterization of hydroquinone-loaded nanofiber for topical delivery: effect of chitosan

Hydroquinone (HQ) loaded polymer solution was electrospun for its topical application. Nanofibers were then investigated in terms of stability, drug release, and antifungal activity. The effect of chitosan (CS) was investigated on the viscosity, stability, drug release, and antifungal activity of the developed formulation. Results indicate a significantly stable HQ-loaded nanofiber formulation. The addition of CS caused hydration of the drug delivery system and enhanced drug release but reduced its stability. HQ-loaded nanofiber mat showed significant antifungal activity, however, there was no inhibition zone in samples containing CS.     

A Molecular Approach to Self‐Supported Cobalt‐Substituted ZnO Materials as Remarkably Stable Electrocatalysts for Water Oxidation

In regard to earth‐abundant cobalt water oxidation catalysts, very recent findings show the reorganization of the materials to amorphous active phases under catalytic conditions. To further understand this concept, a unique cobalt‐substituted crystalline zinc oxide (Co:ZnO) precatalyst has been synthesized by low‐temperature solvolysis of molecular heterobimetallic Co_4?xZn_xO₄ (x=1–3) precursors in benzylamine. Its electrophoretic deposition onto fluorinated tin oxide electrodes leads after oxidative conditioning to an amorphous self‐supported water‐oxidation electrocatalyst, which was observed by HR‐TEM on FIB lamellas of the EPD layers. The Co‐rich hydroxide‐oxidic electrocatalyst performs at very low overpotentials (512 mV at pH 7; 330 mV at pH 12), while chronoamperometry shows a stable catalytic current over several hours.     

The effect of 3D printing on the morphological and mechanical properties of polycaprolactone filament and scaffold

Three‐dimensional (3D) printing becomes an attractive technique to fabricate tissue engineering scaffolds through its high control on fabrication and repeatability using the printing parameters. This technique can be combined by the finite element method (FEM), and tissue‐specific scaffolds with desirable morphological and mechanical properties can be designed and manufactured. In this study, the influential 3D printing parameters on the morphological and mechanical properties of polycaprolactone (PCL) filament and scaffold were studied experimentally and numerically. First, the effects of printing parameters and process on the properties of extruded PCL filament were investigated. Then, using FEM, the effects of filament specifications on the overall characteristics of the scaffold were evaluated. Results showed that both the printing process in terms of resting time and remaining time and the printing parameters like pressure, printing speed, and printing path length have influenced the filament properties. In addition, both the filament diameter and elastic modulus had significant effects on the properties of scaffold especially, a 20% increase in the filament diameter caused the scaffold compressive elastic modulus to rise by around 72%. It is concluded that the printing parameters and process must be tuned very well in fabricating scaffolds with the desired morphology and mechanical property.     

Modification of the GV-MSA model in obtaining the activity and osmotic coefficients of aqueous electrolyte solutions

In this work a modified form of the Ghotbi–Vera Mean Spherical Approximation model (MGV-MSA) has been used to correlate the mean ionic activity coefficients (MIAC) for a number of symmetric and asymmetric aqueous electrolyte solutions at 25 °C. In the proposed model the hard sphere as well as the electrostatic contributions to the MIAC and the osmotic coefficient of the previously GV-MSA model has been modified. The results of the proposed model for the MIAC of the electrolyte solutions studied in this work are used to directly calculate the values of the osmotic coefficients without introducing any new adjustable parameter. In the MGV-MSA model the cation diameter as well as the relative permittivity of water depends on the electrolyte concentration. Having considered such dependency for both cation and relative permittivity for water in an electrolyte solution the modification of the GV-MSA has been made. It should be stated that in the MGV-MSA model the anion diameter in the solution similar to that in the GV-MSA model remains constant and independent of the electrolyte concentration. The results obtained from the proposed model have been favorably compared with those of the GV-MSA model. The results showed that the MGV-MSA model can more accurately correlate the MIAC of the single electrolyte solutions than those of the GV-MSA model. The same comparison has been observed in case of the osmotic coefficients for the electrolyte solutions studied in this work. It should be noted that in order to do an unequivocal comparison between the results obtained from the models used in this work the same minimization procedure and the same experimental data for the MIAC and the osmotic coefficients have been used. Also it should be mentioned that in the MGV-MSA model the conversion from the McMillan–Mayer (MM) framework to that of the Lewis–Randall (LR) has been performed. It has been concluded that such transformation can affect the results in particular at higher electrolyte concentrations.     

Chemical and nanomechanical analysis of rice husk modified by ATRP-grafted oligomer

Rice husk (RH), an abundant agricultural residue, was reacted with 2-bromoisobutyryl bromide, to convert it to a heterogeneous polyfunctional macroinitiator for Atom Transfer Radical Polymerization (ATRP). The number of active sites placed on the RH surface was small, but they were ATRP active. Non-polar methyl methacrylate (MMA) and polar acrylonitrile (AN) were polymerized from the RH, and a sequential monomer addition was used to prepare an amphiphilic PMMA-b-PAN copolymer on RH surface. FTIR qualitatively confirmed the grafting. Gravimetric and XPS analysis of the different RH surface compositions indicated thin layers of oligomeric PMMA, PAN, and PMMA-b-PAN. The modified surfaces were mapped by nanomechanical AFM to measure surface roughness, and adhesion and moduli using the Derjaguin-Muller-Toropov model. RH grafted with MMA possessed a roughness value of 7.92, and a hard and weakly adhering surface (13.1 GPa and 16.7 nN respectively) while RH grafted with AN yielded a roughness value of 29 with hardness and adhesion values of 4.0 GPa and 23.5 nN. The PMMA-b-PAN modification afforded a surface with a roughness value of 51.5 nm, with hardness and adhesion values of 3.0 GPa and 75.3 nN.     

Carbon nanotube composite coated platinum electrode for detection of Cr(III) in real samples

This paper demonstrates the application of composite multi-walled carbon nanotube (MWNT) polyvinylchloride (MWNT-PVC) based on 1,5-diphenylcarbazide as chromium ionophore in potentiometric measurement. The sensor shows a good Nernstian slope of 19.52 ± 0.40 mV/decade in a wide linear range concentration of 6.3 × 10⁻⁸ to 1.0 × 10⁻² M for Cr(NO₃)₃. The detection limit of this electrode was found to be 3.2 × 10⁻⁸ M of Cr(NO₃)₃ and is applicable in a pH range of 3.0-6.8. It has a short response time of about 10 s. This chromium electrode has a good selectivity over 16 various metal ions. The practical analytical utility of this electrode was demonstrated by measurement of Cr(III) in drinking water and mineral water samples without any serious preliminary pre-treatment and chromium in multivitamin.     

1H NMR based metabolic profiling in Crohn's disease by random forest methodology

The present study was designed to search for metabolic biomarkers and their correlation with serum zinc in Crohn's disease patients. Crohn's disease (CD) is a form of inflammatory bowel disease that may affect any part of the gastrointestinal tract and can be difficult to diagnose using the clinical tests. Thus, introduction of a novel diagnostic method would be a major step towards CD treatment. Proton nuclear magnetic resonance spectroscopy (¹H NMR) was employed for metabolic profiling to find out which metabolites in the serum have meaningful significance in the diagnosis of CD. CD and healthy subjects were correctly classified using random forest methodology. The classification model for the external test set showed a 94% correct classification of CD and healthy subjects. The present study suggests Valine and Isoleucine as differentiating metabolites for CD diagnosis. These metabolites can be used for screening of risky samples at the early stages of CD diagnoses. Moreover, a robust random forest regression model with good prediction outcomes was developed for correlating serum zinc level and metabolite concentrations. The regression model showed the correlation (R²) and root mean square error values of 0.83 and 6.44, respectively. This model suggests valuable clues for understanding the mechanism of zinc deficiency in CD patients. Copyright © 2014 John Wiley & Sons, Ltd.     

Structurally diverse and readily tunable photocrosslinked chondroitin sulfate based copolymers

Our group has previously reported on successful biofunctionalization of poly(ethylene glycol diacrylate) (PEGDA) gels using chondroitin sulfate (CS) and improving moduli of methacrylated‐CS (MCS) gels using short PEGDA comonomers. Here, we focused on understanding the composition‐property relationship of MCS‐PEGDA copolymers. By changing concentration, composition, and medium's ionic strength the gels were modified to show a diverse range of properties. Photopolymerized copolymers with >4:1 ratio of one component had compressive moduli of up to 24 times higher and up to 17 times lower swelling degree (q) than those of MCS alone. The increased moduli and lowered q were consistent with the hypothesis that PEGDA improves kinetic chain growth by overcoming the steric hindrances of the macromer. The swelling and moduli of the gels were tuned by changing the ratio of the comonomers. The swelling and moduli of the gels were lowered with presence of salt in solution while the fracture strain increased. These changes were hypothesized to be the result of transition of CS chain conformation from highly extended and non‐Gaussian to less extended and Gaussian distribution. The complete understanding of MCS‐PEGDA composition–property relationship provides a general strategy to tune the moduli or q of polysaccharide‐based hydrogels while avoiding undesirable phase separation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1070–1079