A gadolinium-based magnetic ionic liquid for supramolecular dispersive liquid–liquid microextraction followed by HPLC/UV for the determination of favipiravir in human plasma

Favipiravir is a potential antiviral medication that has been recently licensed for Covid-19 treatment. In this work, a gadolinium-based magnetic ionic liquid was prepared and used as an extractant in dispersive liquid–liquid microextraction (DLLME) of favipiravir in human plasma. The high enriching ability of DLLME allowed the determination of favipiravir in real samples using HPLC/UV with sufficient sensitivity. The effects of several variables on extraction efficiency were investigated, including type of extractant, amount of extractant, type of disperser and disperser volume. The maximum enrichment was attained using 50 mg of the Gd-magnetic ionic liquid (MIL) and 150 μl of tetrahydrofuran. The Gd-based MIL could form a supramolecular assembly in the presence of tetrahydrofuran, which enhanced the extraction efficiency of favipiravir. The developed method was validated according to US Food and Drug Administration bioanalytical method validation guidelines. The coefficient of determination was 0.9999, for a linear concentration range of 25 to 1.0 × 10⁵ ng/ml. The percentage recovery (accuracy) varied from 99.83 to 104.2%, with RSD values (precision) ranging from 4.07 to 11.84%. The total extraction time was about 12 min and the HPLC analysis time was 5 min. The method was simple, selective and sensitive for the determination of favipiravir in real human plasma.     

Spectrophotometric assay of cephalosporins in pharmaceutical products,using chromotrope 2B and chromotrope 2R

A simple, rapid and sensitive Spectrophotometric method is proposed for the determination of cephadroxil (I), cephalexin (II) and cephradine (III). The method is based on ion-pair complex formation between these derivatives and Chromotrope 2B (C2B) or Chromotrope 2R (C2R), to give a highly coloured radical anion. The coloured products are quantified spectrophotometrically at 542 and 564 nm for C2B and C2R, respectively. The optimization of the experimental conditions is described. The method has been used for the determination of 0.4–15, 0.4–14 and 0.4–18 g/ml of drugs I, II and III, respectively. The accuracy of the method is indicated by the excellent recovery (100.0±1.7%) and the precision is supported by the low relative standard deviations 1.5%. The sensitivity of the method is discussed and the results are compared with the official method. The interference from common degradation products and excipients was also studied. The proposed method was applied successfully to the determination of the different cephalosporins in dosage forms, with good precision and accuracy. The results were compared with those given by the official B.P. 1993 method.     

Utility of copper(II) oxide as a packed reactor in flow injection assembly for rapid analysis of some angiotensin converting enzyme inhibitors

A new simple, sensitive, rapid and precise flow injection (FI) procedure based on the formation of copper complexes with some angiotensin converting enzyme (ACE) inhibitors has been developed and evaluated for the analysis of lisinopril (LN), enalapril maleate (EP), ramipril (RP) and perindopril tert-butylamine (PD). In this method, samples were injected into a flowing stream of distilled-deionized water, carried through the packed reactor of CuO for derivatization followed by ultraviolet (UV) detection. The flow rate was 1.5 ml min⁻¹ and column temperature was ambient (25 °C). Lisinopril was injected directly into the flowing stream and the detector response was measured at 262 nm. The hydrolysis products of enalapril maleate, ramipril and perindopril tert-butylamine in 0.2N NaOH were injected after neutralization with 1N HCl and the detector response was measured at 272, 265 and 252 nm, respectively. The developed method was successfully applied to the determination of tested drugs in pharmaceutical preparations at a sampling rate of 60 samples h⁻¹ and a recovery near 100% for all compounds.     

Enantioselective synthesis of (1S,2S)-1,2-di-tert-butyl and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamines

An enantioselective synthesis of sterically congested 1,2-di-tert-butyl and 1,2-di-(1-adamantyl)ethylenediamines has been developed. Thus, diastereomerically pure trans-1-apocamphanecarbonyl-4,5-dimethoxy-2-imidazolidinones 6 and 7 were successfully prepared by optical resolution of (±)-trans-4,5-dimethoxy-2-imidazolidinone using apocamphanecarbonyl chloride (MAC-Cl) followed by stereospecific and stepwise substitution of the dimethoxyl groups using tert-butyl or 1-adamantyl cuprates to provide (4S,5S)-4,5-di-tert-butyl and (4R,5R)-4,5-di-(1-adamantyl)-2-imidazolidinones 12 and 15, respectively. Furthermore, N-acetyl 4,5-di-tert-butyl and 4,5-di-(1-adamantyl)-2-imidazolidinones 16a,b were enantioselectively deacetylated using a catalytic oxazaborolidine system to provide enantiopure 1-p-tolylsulfonyl-4,5-di-tert-butyl-2-imidazolidinones 12 and 19 and 1-p-tolylsulfonyl-4,5-di-(1-adamantyl)-2-imidazolidinones 18 and 20, respectively. Finally, N-p-tolylsulfonyl-2-imidazolidinones 12 and 15 were treated with 30 equiv of Ba(OH)₂·8H₂O to achieve ring cleavage and to provide (1S,2S)-1,2-di-tert-butylethylenediamine 3 and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamine 4.     

Cobalt(II), nickel(II), copper(II), zinc(II) and uranyl(VI) complexes of acetylacetone bis(4-phenylthiosemicarbazone)

Summary Reaction of one mole of acetylacetone with two moles of 4-phenylthiosemicarbazide yields the unusual Schiff base, MeC(=N-NHCSNHPh)CH₂C(=NNHCSNHPh)Me. APT = H₂L) acetylacetone bis(4-phenylthiosemicarbazone). The complexes of Co^II, Ni^II, Cu^II, Zn^II and U^VIO₂ have been prepared and characterized by analytical, i.r., electronic spectral and magnetic measurements. The Co^II, Ni^II and Cu^II complexes have been assigned square-planar stereochemistry on the basis of magnetic and spectroscopic studies. The ligand is a neutral or dibasic quadridentate SNNS donor as revealed by i.r. spectral studies.     

Time‐Varying Flexible Least Squares for Thermal Desorption of Gases

Time‐varying linear regression via flexible least squares is used to determine temperature‐dependent kinetic parameters during low‐pressure, steady‐state, temperature‐programmed desorption from catalytic surfaces. The flexible least squares approach optimizes time‐varying parameters by minimizing dynamic and measurement discrepancies between a linear theoretical model and experimental data using linear regression. The effectiveness of this approach is demonstrated by calculation of accurate temperature‐dependent activation energies, preexponential factors, and differential conversion functions for the evolution of 3‐methyl‐2‐oxetanone (β‐lactone) during the selective oxidation of isobutane over aluminum phosphomolybdates.     

Biological Effect,Aquation, and Kinetics of Oxidation of Bis(2‐aminobenzothiazole)dichlorocobalt(II) Complex by Periodate in Aqueous Acidic Medium

The biological effect, aquation, and kinetics of oxidation of bis(2‐aminobenzothiazole)dichlorocobalt(II) complex by periodate in aqueous acidic solutions were studied. The complex exhibited a broad resistance toward the studied pathogens. The average value of the aquation constant was calculated spectrophotometrically as 2.55 × 10^?5 mol² dm^?6. Kinetics of the oxidation reaction showed first‐order dependence on each reactant concentration and increased by increasing pH over the 3.80–4.80 range, 35–50°C, and decreased by increasing the ionic strength over the 0.1–0.5 mol dm^?3 range. The polymerization of acrylonitrile was taken as an evidence for an inner‐sphere mechanism through the formation of free radical intermediates of Co(III) complexes, which were slowly converted to the final Co(III)products.     

Synthesis and spectroscopic studies of some new oxazepine derivatives throughout [2+5] cycloaddition reactions (III)

The present work included condensation reactions of o-tolidine with different aromatic aldehydes in absolute ethanol to give Schiff bases (w ₉ –w ₁₂ ) in high yield which, on reaction with maleic and phthalic anhydride by [2+5] cycloaddition reactions in the presence of suitable solvents, give the corresponding [1,3]oxazepine-4,7-dione (w ₉ m–w ₁₂ m) and [1,3]oxazepine-1,5-dione (w ₉ ph–w ₁₂ ph), respectively. The structure of the newly synthesized compounds were monitored by TLC and established on the basis of elemental analysis, FT-IR, and ¹H NMR.