Quaternary ammonium compounds in roots and leaves of Capparis spinosa L. from Saudi Arabia and Italy: investigation by HPLC-MS and 1H NMR

Capparis spinosa L. is a perennial plant typical of the Mediterranean flora and a multipurpose plant used for curing various human ailments. Quaternary ammonium compounds (QACs), as constituents of Capparaceae, play important roles in protecting against abiotic stress. Aim of this work was to determine QACs in root and leaves of caper from two proveniences. The presence of stachydrine, choline, glycine betaine and homo-stachydrine has been confirmed by high resolution MS, while ¹H NMR was applied to quantify the main QACs in the aqueous extracts. Stachydrine was quantified at 20.2 mg/g and 32.3 mg/g on dry leaves from South of Italy and Saudi Arabia, respectively, while a minor content was in dry roots (from 10.4 to 12.5 mg/g). Choline was considerably lower both in leaves and roots (from 0.3 to 1.2 mg/g). To our knowledge, this is the first report on the determination of QACs both in root and leaves of C. spinosa.     

Kinetic spectrophotometric methods for the determination of alfuzosin hydrochloride in bulk and pharmaceutical formulations

Simple and sensitive kinetic spectrophotometric methods were established for the determination of alfuzosin hydrochloride in bulk and in its pharmaceutical preparations using alkaline potassium permanganate as an oxidizing agent. The methods involve determination of alfuzosin HCl by kinetic studies of its oxidation at room temperature for a fixed time of 15 min. The absorbance of the colored manganate ions was measured at 610 nm. Alternatively, the decrease in the absorbance of permanganate upon addition of the studied drug was also measured at 525 nm. The absorbance-concentration plots in both procedures were rectilinear over the range of 2.0–30.0 μg/mL. The different experimental parameters affecting the development were carefully studied and optimized. The determination of alfuzosin HCl by the fixed concentration and initial rate methods is also feasible with the calibration equations obtained but the fixed time method has been found to be more applicable. Both procedures were applied to the determination of alfuzosin HCl in formulations. The results obtained were in good agreement with those obtained using reference methods.     

Chemiluminescence determination of some fluoroquinolone derivatives in pharmaceutical formulations and biological fluids using [Ru(bipy)(3)(2+)]-Ce(IV) system

A new chemiluminescence (CL) method using flow injection has been described for the rapid and sensitive determination of three fluoroquinolone derivatives, namely ofloxacin, norfloxacin and ciprofloxacin hydrochloride. The method is based on the CL reaction of the studied fluoroquinolones with tris(2,2'-bipyridyl)ruthenium(II) [Ru(bipy)(3)(2+)] and Ce(IV) in sulfuric acid medium. Under the optimum conditions, the CL intensity is proportional to the concentration of the drugs in solution over the range 0.05-7.0 mug ml(-1) for norfloxacin, 0.05-6.0 mug ml(-1) for ciprofloxacin hydrochloride and 0.003-0.7 mug ml(-1) for ofloxacin. The limits of detection (s/n=3) were 3.1x10(-8) M norfloxacin, 2.6x10(-8) M ciprofloxacin hydrochloride and 5.5x10(-9) M ofloxacin. The method was applied successfully to the determination of these compounds in dosage forms and biological fluids.     

In situ palladium/N-heterocyclic carbene complex catalyzed carbonylative cross-coupling reactions of arylboronic acids with 2-bromopyridine under CO pressure: efficient synthesis of unsymmetrical arylpyridine ketones and their antimicrobial activities

Transition Metal Chemistry - The carbonylative Suzuki cross-coupling of 2-bromopyridine with various boronic acids to prepare unsymmetrical arylpyridine ketones has been carried out using...     

Three-component,one-pot synthesis of pyrano[3,2-c]chromene derivatives catalyzed by ammonium acetate: Synthesis,characterization, cation binding,and biological determination

Three-component reaction of arylaldehydes with malononitrile and 4-hydroxycoumarine using CH₃COONH₄ as a catalyst at reflux was used for the synthesis of novel substituted pyrano[3,2-c]chromene derivatives. The structure of these compounds was assigned by spectroscopic data such as (IR, ¹HNMR, ¹³CNMR, and mass spectral data). The cation binding properties of chromene derivatives 4a-c towards Cu²⁺, Ni²⁺, and Zn²⁺ were studied in methanol. The results showed that Zn²⁺ is the most complexed in this series of cations, and 4c is best complexed with either Ni²⁺ and Zn²⁺. Antimicrobial properties of new pyrano[3,2-c]chromene derivatives are investigated, the compound 4c presents against Micrococcus luteus LB 14110 an MIC value of 0.0185 mg/mL quite better to that of ampicillin (0.0195 mg/mL) used as standard. Concerning acetylcholinesterase inhibition activity (AChEI), compound 4c presents an interesting AChEI activity with an inhibition of 52%.     

Engineering paper as a substrate for blood typing bio-diagnostics

The effect of paper structure on blood typing visualization was quantified and analyzed to engineer low-cost diagnostics. Commercial and experimental papers varying in fibre composition, basis weight, density and porosity were investigated for their ability to separate agglutinated (blood interacted with specific antibodies) from non-agglutinated (blood interacted with non-specific antibodies) red blood cells (RBCs). Antibodies solutions and blood samples were sequentially absorbed on paper, allowed to interact, eluded with a saline solution, and the intensity of the remaining blood spot was quantified by image analysis. The efficiency and clarity of RBC separation was quantified with the relative intensity (R.I.) index defined as the intensity ratio of the non-specific test over the specific system; the lower the R.I., the better is the separation between a positive from a negative test. Thick and dense papers are improper for blood typing as they retain indiscriminately both agglutinated and non-agglutinated RBCs. Thin and porous papers provided the best performance. The R.I. index (the lower the better) increased fairly linearly with paper density and thickness but inversely proportionally with paper pore size. The type of fibres played a minor role. The paper structure is critical in the design of blood typing assay. However, it is only one element of the diagnostic system to engineer with the interactions RBC-antibody-paper.     

Emanation power of radon and its concentration in soil and rocks

Experiments were carried out to determine emanation power and radon levels in different kinds of soil and bedrocks. Seven stations were selected in the investigated district, which covers an area of about 2300 km² in the northern and western part of Jordan. Five holes were dug in each station at different depths. Two to three passive dosimeters using plastic detectors (CR-39) were put in each hole. Two weeks later, the dosimeters were collected and chemically etched. Some soil and rock samples from the study area were collected and analyzed for radioactive nuclides using γ-ray spectroscopy. The correspondence between radon levels in the soil gas and its precursor concentrations is not clear. However, the study confirms the exponential increase in radon level with depth. In general, Al-Hisa phosphate limestone showed the highest radon concentration while Amman silicified limestone showed the lowest concentration.     

Determination of phenolic sympathomimetic drugs in pharmaceutical samples and biological fluids by flow-injection chemiluminescence

A rapid and highly sensitive flow-injection chemiluminometric method was developed for determination of 3 sympathomimetic drugs, namely, etilefrine hydrochloride, isoxsuprine hydrochloride, and prenalterol hydrochloride. The method is based on chemiluminescence induced by oxidation of drugs with acidified potassium permanganate in the presence of formic acid as a carrier. The calibration graphs were linear over the concentration ranges 0.2-9, 0.2-12.5, and 0.025-1.25 microg/mL for the 3 compounds, respectively. The method was applied successfully in determining the drugs in dosage forms and in biological fluids. A proposal for the reaction pathway is suggested.     

Synthesis and antimicrobial activity of N'-heteroarylidene-1-adamantylcarbohydrazides and (±)-2-(1-adamantyl)-4-acetyl-5-[5-(4-substituted phenyl-3-isoxazolyl)]-1,3,4-oxadiazolines

The reaction of adamantane-1-carbohydrazide (1) with heterocyclic aldehydes, namely 5-(4-chlorophenyl)isoxazole-3-carboxaldehyde (2a), 5-(4-methylphenyl)isoxazole-3-carboxaldehyde (2b), 5-(4-methoxyphenyl)isoxazole-3-carboxaldehyde (2c), 1H-imidazole-2-carboxaldehyde and 2-butyl-4-chloro-1H-imidazole-5-carboxaldehyde, in ethanol, yielded the corresponding N'-heteroarylidene-1-adamantylcarbohydrazides 3a, 3b, 3c, 4 and 5, respectively, in good yields. The 4-acetyl-1,3,4-oxadiazoline analogues 6a?c were prepared in 48-55% yields by heating their corresponding N'-heteroarylidene-1-adamantylcarbohydrazides 3a-c with acetic anhydride for two hours. Compounds 3a-c, 4, 5 and 6a-c were tested for in vitro activities against a panel of Gram-positive and Gram-negative bacteria and the yeast-like pathogenic fungus Candida albicans. Compounds 4 and 5 displayed potent broad-spectrum antimicrobial activity, while compounds 3a-c showed good activity against the Gram-positive bacteria.