Thermo-magneto-hydrodynamical effects on merging flow of TiO2–water nanofluid

Journal of Thermal Analysis and Calorimetry - The steady flow of a nanofluid (mixture of titanium dioxide and water) in a rectangular channel under the influence of an inclined magnetic field is...     

Simple matching vs linear assignment in scheduling models with positional effects: A critical review

This paper addresses scheduling models in which a contribution of an individual job to the objective function is represented by the product of its processing time and a certain positional weight. We review most of the known results in the area and demonstrate that a linear assignment algorithm as part of previously known solution procedures can be replaced by a faster matching algorithm that minimizes a linear form over permutations. Our approach reduces the running time of the resulting algorithms by up to two orders, and carries over to a wider range of models, with more general positional effects. Besides, the same approach works for the models with no prior history of study, e.g., parallel machine scheduling with deterioration and maintenance to minimize total flow time.     

Residual determination and risk assessment of buprofezin in plum (Prunus domestica) grown in open‐field conditions following the application of three different formulations

This study was conducted to characterize the residual level and perform a risk assessment on buprofezin formulated as an emulsifiable concentrate, wettable powder, and suspension concentrate over various treatment schedules in plum (Prunus domestica). The samples were extracted with an AOAC quick, easy, cheap, effective, rugged, and safe, ‘QuEChERS’, method after major modifications. As intrinsic interferences were observed in blank plum samples following dispersive‐solid phase extraction (consisting of primary secondary amine and C₁₈ sorbents), amino cartridges were used for solid‐phase extraction. Analysis was carried out using liquid chromatography with diode array detection and confirmed by liquid chromatography–tandem mass spectrometry. The method showed excellent linearity with determination coefficient (R² = 1) and satisfactory recoveries (at two spiking levels, 0.5 and 2.5 mg/kg) between 90.98 and 94.74% with relative standard deviation (RSD) ≤8%. The limit of quantification (0.05 mg/kg) was considerably lower than the maximum residue limit (2 mg/kg) set by the Codex Alimentarius. Absolute residue levels for emulsifiable concentrates were highest, perhaps owing to the dilution rate and adjuvant. Notably, all formulation residues were lower than the maximum residue limit, and safety data proved that the fruits are safe for consumers. Copyright © 2016 John Wiley & Sons, Ltd.     

Trace determination of parabens in cosmetics and personal care products using fabric‐phase sorptive extraction and high‐performance liquid chromatography with UV detection

A simple, fast, and sensitive analytical protocol using fabric‐phase sorptive extraction followed by high performance liquid chromatography with ultraviolet detection has been developed and validated for the extraction of five parabens including methylparaben, ethylparaben, propylparaben, butylparaben, and benzylparaben. In the present work, sol‐gel polyethylene glycol coated fabric‐phase sorptive extraction membrane is used for the preconcentration of parabens (polar) from complex matrices. The use of fabric‐phase sorptive extraction membrane provides a high surface area which offers high sorbent loading, shortened equilibrium time, and overall decrease in the sample preparation time. Various factors affecting the performance of fabric‐phase sorptive extraction, including extraction time, eluting solvent, elution time, and pH of the sample matrix, were optimized. Separation was performed using a mobile phase consisting of water:acetonitrile (63:37; v/v) at an isocratic elution mode at a flow rate of 0.9 mL/min with wavelength at 254 nm. The calibration curves of the target analytes were prepared with good correlation coefficient values (r² > 0.9955). The limit of detection values range from 0.252 to 0.580 ng/mL. Finally, the method was successfully applied to various cosmetics and personal care product samples such as rose water, deodorant, hair serum, and cream with extraction recoveries ranged between 88 and 122% with relative standard deviation <5%.     

Order-Unity 13C Nuclear Polarization of [1-13C]Pyruvate in Seconds and the Interplay of Water and SABRE Enhancement

Signal Amplification By Reversible Exchange in SHield Enabled Alignment Transfer (SABRE-SHEATH) is investigated to achieve rapid hyperpolarization of ¹³C₁ spins of [1-¹³C]pyruvate, using parahydrogen as the source of nuclear spin order. Pyruvate exchange with an iridium polarization transfer complex can be modulated via a sensitive interplay between temperature and co-ligation of DMSO and H₂O. Order-unity ¹³C (>50 %) polarization of catalyst-bound [1-¹³C]pyruvate is achieved in less than 30 s by restricting the chemical exchange of [1-¹³C]pyruvate at lower temperatures. On the catalyst bound pyruvate, 39 % polarization is measured using a 1.4 T NMR spectrometer, and extrapolated to >50 % at the end of build-up in situ. The highest measured polarization of a 30-mM pyruvate sample, including free and bound pyruvate is 13 % when using 20 mM DMSO and 0.5 M water in CD₃OD. Efficient ¹³C polarization is also enabled by favorable relaxation dynamics in sub-microtesla magnetic fields, as indicated by fast polarization buildup rates compared to the T₁ spin-relaxation rates (e. g., ∼0.2 s⁻¹ versus ∼0.1 s⁻¹, respectively, for a 6 mM catalyst-[1-¹³C]pyruvate sample). Finally, the catalyst-bound hyperpolarized [1-¹³C]pyruvate can be released rapidly by cycling the temperature and/or by optimizing the amount of water, paving the way to future biomedical applications of hyperpolarized [1-¹³C]pyruvate produced via comparatively fast and simple SABRE-SHEATH-based approaches.     

Simultaneous determination of sulfoxaflor and its metabolites,X11719474 and X11721061, in brown rice and rice straw after field application using LC-MS/MS

The present study was carried out to develop an analytical method for simultaneously detecting and quantifying sulfoxaflor and its metabolites (X11721061, X11719474) in brown rice and rice straw using liquid chromatography–tandem mass spectrometry. The parent compound and its metabolites were extracted and purified using original ‘QuEChERS’ method with modification. The matrix-matched calibration curve of sulfoxaflor and its metabolites in both matrices achieved good linearity with determination coefficients (R²) ≥0.9944. The overall recoveries of sulfoxaflor at two fortification levels (rice: 0.2 and 1.0 mg/kg; rice straw: 0.4 and 2.0 mg/kg) ranged from 97.37% to 107.71% with relative standard deviations (RSDs) <5%. On the other hand, the recoveries of both metabolites (X11721061 and X11719474) at 0.1 and 0.5 mg/kg (rice) and 0.2 and 1.0 mg/kg (rice straw) were satisfactory with values ranging from 83.70 % to 112.60% with RSDs <8%. During storage at ?20°C, the analyte and its metabolites were stable for up to 87 days. The limits of quantification of 0.02 mg/kg were lower than the maximum residue limit (0.2 mg/kg) set by the Korean Ministry of Food and Drug Safety for brown rice. The method was successfully applied to paddy field treated with different programme schedules and a preharvest interval of 7 days was proposed based upon the current study. In sum, the developed method is accurate and reproducible for ensuring the reliable determination of sulfoxaflor (and its metabolites) in harvested rice grain and straw samples from the field. The residual level of parent compound does not seem to pose any hazardous effect and treated rice could be safely used for consumption.     

The Effect of Added Salts and Organics on the Cloud Point of TX‐114

Herein we report the effect of additives (salts and organics) on the cloud point (CP) of nonionic surfactant Triton X‐114 (TX‐114) aqueous solutions. CP showed a concentration dependent variation in the absence of any added compound. Addition of quaternary ammonium (or phosphonium) bromides to 0.8 mM TX‐114 solutions increased the CP. It was found that long chain alcohols and amines decreased the CP of 0.8 mM TX‐114 +80 mM Bu₄AmB aqueous system, while it either remained constant or increased in the presence of short chain additives. The effect of first group additives (long chain) can be explained by considering that these additives solubilize in interfacial region and assist in micellar growth. Short chain additives remain in aqueous phase and affect the micelle hydration by affecting the solvent. Pentylamine behaved differently than pentanol: pentylamine increased the CP (like short chain additives) while pentanol decreased the CP. In pentylamine, the hydrophilicity of NH₂ group and its dissociation into NH₃ ⁺ dominates over the hydrophobicity of its alkyl chain. Aliphatic hydrocarbons first decreased and then increased the CP. The overall behavior depended upon the chain length of the hydrocarbon. With decane, the CP decreasing region disappeared completely.