亚波长金属线栅的设计、制备及偏振成像实验研究

针对红外偏振成像系统,运用等效介质理论,在氟化钙基底上设计了周期为200 nm,深度为100 nm的金属铝栅.模拟计算结果表明,设计的金属铝栅在中红外(3—5 μm)和远红外(8—12 μm)双波段范围内,以及±20°的视场范围内能够提供大于35dB的消光比.利用电子束曝光、反应离子束刻蚀、等离子去胶等工艺完成了金属铝栅的制作.将金属铝栅放在中波红外热像仪前,得到了目标轮廓清晰的偏振图像. 关键词： 亚波长衍射光栅 偏振成像 等效介质理论     

Surface plasmon interference formed by tightly focused higher polarization order axially symmetric polarized beams

We numerically study the surface plasmon interference formed by tightly focused higher polarization order axially symmetric polarized beams (ASPBs) based on the vectorial diffraction theory. The definition of ASPBs is stated, and the optical setup for surface plasmon polariton (SPP) excitation and mathematical expressions for interfering SPP fields are proposed. The simulation results show that the interfering SPP fields present a multi-focal spot pattern. In addition, the number of spots is related to the polarization order of the incident beams P as 2×(P-1), indicating potential utilization in near-field multiple optical trapping and near-field imaging and sensing. The unique interfering phenomenon is also explained.     

Tunable directional beaming assisted by asymmetrical SPP excitation in a subwavelength metallic double slit

We present a design for tunable directional beaming through a subwavelength metallic double slit surrounded by dielectric surface-relief gratings.On-axis and off-axis beaming can be switched by controlling the incident angle to asymmetrically excite surface plasmon polaritons(SPPs) that are subsequently coupled out to propagating beams by the two gratings on the left and the right sides of the double slit.Furthermore,the division of optical power into two off-axis beaming directions can be tuned smoothly by varying the incident angle while keeping the total power almost unchanged.The mechanism of this effect is analyzed theoretically and verified using rigorous numerical simulations.     

计算全息术中的空间域滤波

在计算全息技术中,降低载频有着重要的意义.本文提出了一种适用于含二次项波面的空间域离轴滤波方法.在某些情况下,载频可降至一般频率域滤波的1/3左右,文后给出了两例实验结果.     

计算全息补偿法制作全息凹面光栅的改进

鉴于计算全息图可以产生一个任意形状的波面,用它作为位相补偿板来制作全息凹面光栅以适应消象差的要求比普通光学全息法更具灵活性,而且消象差波长的选择也不受制作时所用的光源光波波长所限制。本文中采用了离轴滤波及改变参考波面特性等措施,大大提高了计算全息图的空间带宽积,扩大了这一方法的使用范围。对1200l/mm的Ⅲ型及Ⅳ型凹面全息光栅进行了设计,制作及实验验证。     

多值逻辑与多值数字运算的光学实现

提出利用光学符号代换法则实现POST代数和GALOIS代数两种基本的多值逻辑函数,并给出了Max(x,y)运算、Min(x,y)运算以及数字加法和乘法运算的实验结果。     

迭代法在高效等强多光束分光光栅设计中的应用

在高效等强多光束分光光栅的设计中引入迭代法,形成了一种新的设计思想;9光束高效等强多光束分光光栅的设计实例初步说明了该设计思想的可行性.     

Secure and noise-free holographic encryption with a quick-response code简

An optical fiber sensor for ultrathin layer sensing based o51 short-range surface plasmon polariton （SRSPP） is proposed, and the sensing characteristics are theoretically analyzed. Simulation results indicate that even for a detecting layer much thinner than the vacuum wavelength, a resolution as high as 3.7×10-6 RIU can be obtained. Moreover, an average ttfickness-detection sensitivity of 6.2 dB/nm is obtained, which enables the sensor to detect the thickness variation of the ultrathin layer up to tens of nanometers. The sensitive region of thickness could be adjusted by tuning the structure parameters.     

基于光学沃尔什变换特征提取的图像匹配

采用光电结合的方法实现了沃尔什 （Walsh）分量变换,提出出反映图像主要特征的分量,用于大容量图像库的内容匹配查找,基于以非相干光相关器为核心的光电混合图像处理系统,实现了基于光学沃尔什变换特征提取的图像匹配算法。     

Epoxy Resin-Photopolymer Composite with None-Shrinkage for Volume Holography

A novel photopolymer storage medium for holographic storage is presented. In particular, the refractive in-dex of the monomer methyl methacrylate is much lower than that of the binder epoxy resin solidified by m-xylylenediamine, and the material can be developed into samples with dimension stability and high optical quality and thickness of several millimetres or more. Some none-polymeric macromolecule impurity is uniformly mixed into the medium to aid the monomer diffusing and to enhance the diffraction efficiency. A holographic recording medium of 0.8 mm thickness has been fabricated, and relative theoretical analysis and experiments are presented.