掺杂二氧化锡的二氧化钛的光学性质及其光催化特性

二氧化钛多相催化是一种极具前途的环境污染深度净化技术。 本文以钛酸四丁酯和四氯化锡为原料,无水乙醇为溶剂,采用溶胶-凝胶法制备了掺杂二氧化锡的二氧化钛薄膜和复合氧化物粉体。通过测量薄膜的吸收光谱推算光学能隙,结果发现掺杂样品的光学能隙比纯二氧化钛样品有所变小。随着热处理温度的提高,掺杂和纯二氧化钛样品的光学能隙都略微降低。X-射线衍射分析表明,复合氧化物粉体的热处理温度对样品的晶体结构和光催化性能有重要影响。以掺杂二氧化锡5 % 摩尔比的样品与纯二氧化钛对照,500 ℃以下热处理样品以锐钛矿结构为主,600 ℃热处理样品为锐钛矿与金红石相共存,并显示了较好的光催化性能。透射电子显微镜观察显示,同样600 ℃热处理,掺杂样品要比纯二氧化钛具有更小的颗粒尺寸。在700 ℃热处理的样品中,掺杂样品只存在金红石相而纯二氧化钛样品中仍存有锐钛矿相。用阿伦尼乌斯经验关系式推测的晶粒生长的活化能,纯二氧化钛47.486 kJ.mol, 掺杂5 % 摩尔比的复合氧化物样品33.103 kJ.mol。以亚甲基蓝为降解物质,考察了掺杂量和热处理温度对样品的光催化性能。     

Doping Effect on the Grain Growth of Spinel LiMn2O4 Prepared by Sol-Gel Methods

The cathode-active materials, Li1+yMxMn2-xO4 (M = Al, Co, Ni, Zn, y = 0.02, x = 0.02) powder, were synthesized by sol-gel method using LiOH, Mn(NO3)2 as the starting materials, citric acid as a carrier and Al(NO3)3·9H2O or Co(NO3)2·6H2O or Ni(NO3)2·6H2O or Zn(NO3)2·6H2O as dopants. The influence of different doping elements on the structural properties of the as-prepared samples was investigated by X-ray diffraction (XRD), infrared (IR) spectroscopy and scanning electron microscopy (SEM). X-ray diffraction patterns of the prepared samples were identified as the spinel structure with space group Fd3m. The grain size increases gradually as the sintering temperature rises and corresponding activation energies for the grain growth have been estimated using Arrhenius’ empirical relation.