容量法测定氧化钒中的各种价态钒

用NaOH溶液处理样品，分离V（V）然后以Fe(Ⅱ）滴定测定之。定量加入过量的V（V）到上述残渣中并用H2SO4溶解，用Fe(Ⅱ）滴定，计算出V（Ⅱ），V（Ⅲ）的含量。V（Ⅳ）的测定是通过从总钒量中扣除V（Ⅱ）、V（Ⅲ）、V（Ⅴ）的含量得到。V（Ⅱ）、V（Ⅲ）和V（Ⅴ）的回收率均大于96％，其8次测定结果的相对标准偏差分别为：9．8％、0．4％、1．2％；本法快速、简便，在实际应用中效果良好。     

Spectroscopic fingerprints of valence and spin states in manganese oxides and fluorides

We performed a systematic study of soft X-ray absorption spectroscopy in various manganese oxides and fluorides. Both Mn L-edges and ligand (O and F) K-edges are presented and compared with each other. Despite the distinct crystal structure and covalent/ionic nature in different systems, the Mn-L spectra fingerprint the Mn valence and spin states through spectral lineshape and energy position consistently and evidently. The clear O- and F-K pre-edge features in our high resolution spectra enable a quantitative definition of the molecular orbital diagram with different Mn valence. In addition, while the binding energy difference of the O-1s core electrons leads to a small shift of the O-K leading edges between trivalent and quadrivalent manganese oxides, a significant edge shift, with an order of magnitude larger in energy, was found between divalent and trivalent compounds, which is attributed to the spin exchange stabilization of half-filled 3d system. This shift is much enhanced in the ionic fluoride system. This work provides the spectroscopic foundation for further studies of complicated Mn compounds.     

Analysis of polyfluoroalkyl substances and bisphenol A in dried blood spots by liquid chromatography tandem mass spectrometry

Dried blood spots (DBS), collected as part of the newborn screening program (NSP) in the USA, is a valuable resource for studies on environmental chemical exposures and associated health outcomes in newborns. Nevertheless, determination of concentrations of environmental chemicals in DBS requires assays with great sensitivity, as the typical volume of blood available on a DBS with 16-mm diameter disc is approximately 50 μL. In this study, we developed a liquid–liquid extraction and high-performance liquid chromatography/tandem mass spectrometry method for the detection of perfluorooctanesulfonate (PFOS), perfluorooctanoate (PFOA), and bisphenol A (BPA) in DBS. The method was validated for accuracy, precision, and sensitivity, by spiking of target chemicals at different levels on Whatman 903 filter cards, which is used in the collection of DBS by the NSP. Contamination arising from collection, storage, and handling of DBS is an important issue to be considered in the analysis of trace levels of environmental chemicals in DBS. For the evaluation of the magnitude of background contamination, field blanks were prepared from unspotted portions of DBS filter cards collected by the NSP. The method was applied for the measurement of PFOS, PFOA, and BPA in 192 DBS specimens provided by NSP of New York State. PFOS and PFOA were detected in 100 % of the specimens analyzed. The concentrations of PFOS and PFOA measured in DBS were similar to those reported earlier in the whole blood samples of newborns. BPA was also found in 86 % of the specimens at concentrations ranging from 0.2 to 36 ng/mL (excluding two outliers). Further studies are needed to evaluate the sources of BPA exposures and health outcomes in newborns.     

Optoelectronic and Self‐assembly Properties of Porphyrin Derivatives with Click Chemistry Modification

A series of functionalized porphyrin molecules containing electron‐rich alkynes, synthesized by means of the Sonogashira coupling reaction were further modified by reacting the ethynyl groups with click reagent through a formal [2+2] click reaction. The photophysical and electrochemical properties of the porphyrin derivatives were studied by UV/Vis spectroscopy and cyclic voltammetry. We show that the optoelectronic properties are affected by the click reagent groups and central metal ions. The functionalized porphyrin molecules show strong charge‐transfer (CT) bands in the visible region (near‐IR region) and potent redox activities. Through a phase‐exchange self‐assembly method, the highly organized morphologies were observed by scanning electron microscopy (SEM). The functionalized porphyrin molecules represent an interesting set of candidates for optoelectronic device components. The effect of the metal ions or click reagent groups on the self‐assembly properties were also studied by the UV/Vis spectroscopic titration experiments.     

Effects of mechanical loadings on the performance of a piezoelectric hetero-junction

A fully-coupled model for a piezoelectric hetero-junction subjected to a pair of stresses is proposed by discarding the depletion layer approximation. The effect of mechanical loadings on PN junction performance is discussed in detail. Numerical examples are carried out for a p-Si/ZnO-n hetero-junction under a pair of stresses acting on the ntype ZnO portion near the PN interface, where ZnO has the piezoelectric property while Si is not. It is found that the bottom of conduction band is lowered/raised near the two loading points due to the decrease/increase in the electron potential energy there induced by a tensile-stress mode via sucking in majority-carriers from two outside regions, which implies appearance of a potential barrier and a potential well near two loading points. Furthermore, the barrier height and well depth gradually become large with increasing tensile stress such that more and more electrons/holes are inhaled in loading region from the n-/p-zone, respectively. Conversely, rising/dropping of conduction band bottom is brought out near the two loading points by a compressive-stress mode due to the increase/decrease in the potential energy of electrons by pumping out the majority-carriers from the loading region to the two outside regions. Therefore, a potential well and a potential barrier are induced near the two loading points, such that more and more electrons/holes are driven away from the loading region to the n-zone/p-zone, respectively, with the increasing compressive stress. These effects are important to tune the carrier recombination rate near the PN interface. Thus, the present study possesses great referential significance to piezotronic devices.     

Scaling and universality of integer quantum Hall plateau-to-plateau transitions

We have investigated the integer quantum Hall plateau-to-plateau transition in two-dimensional electrons confined to AlxGa(1-x)As-Al0.33Ga0.67As heterostructures over a broad range of Al concentration x. For x between 0.65% and 1.6%, where the dominant contribution to disorder is from the short-range alloy potential fluctuations, we observe a perfect power-law scaling in the temperature range from 30 mK to 1 K with a critical exponent kappa = 0.42 +/- 0.01.     

Bipolar copolymers comprised mesogen‐jacketed polymer containing oxadiazole units and PVK as host materials for electroluminescent devices

Nonconjugated bipolar transport polymers have been developed as host materials for electroluminescent devices by incorporating both electron‐transporting and hole‐transporting functionalities into copolymers. The random copolymer PCt‐nvk3‐7 containing mesogen‐jacketed segment of P‐Ct have been synthesized and characterized. The effect of mesogen‐jacketed segment content of these bipolar copolymers on device performance has been investigated. The results of polymer light‐emitting diodes (PLEDs) show that the jacketed content of copolymers has a significant effect on device performance: lowering charge transport and facilitating the hole‐electron recombination leads to much higher current efficiency. Applying these high triplet random copolymers as host, the maximum current efficiency of 0.70 cd/A and the maximum brightness of 1872.8 cd/m² was achieved for PCt‐nvk3‐7 with an orange‐emitting complex dopant. The results suggest that the bipolar copolymers PCt‐nvks can be good host polymers for electrophosphorescent devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7861–7867, 2008     

基于全变分正则化的高能闪光照相消模糊图像重建算法

 针对高能闪光照相投影图像消模糊难度大的问题,提出了一种基于全变分正则化的消模糊图像重建算法,该算法根据闪光照相的成像特点,将客体的纵向截面作为一个整体来进行建模,并在重建方程中考虑了模糊因素,然后采用全变分范数作为正则项,构建了用于消模糊图像重建的展平泛函,将消模糊图像重建问题转化为能量泛函极小化问题,通过固定点迭代算法求解图像重建问题的最小化解。数值模拟结果表明：该算法由于考虑了闪光照相成像时的图像模糊因素,在重建时能够较好地消除模糊对重建结果的影响,在抑制噪声的同时能较好地保持图像的边缘信息,有利于提高重建图像的质量。     

Influence of citric acid on the morphology and magnetic properties of barium ferrite thin films

Hexagonal barium ferrite (BaFe₁₂O₁₉) thin films were fabricated by spin coating of precursors from sol-gel methods. Different amount of citric acid was added. Weight loss and changes of chemical bonds during the heat treatment below 500 °C were recorded by thermogravity analyzer and Fourier transform infrared spectroscopy, respectively. The morphology of the films, i.e. the amount of acicular crystallites in the film, was controlled by adjusting the quantity of citric acid. The X-ray diffraction shows that the films are c-axis oriented, but the crystallization is less perfect with the increase of the citric acid. With the increase of the citric acid, the percentage of the acicular crystallites increased. At the same time, the coercivity force increased. The acicular crystallites were not exchange-coupled to the platelet crystallites. The citric acid was understood to form complex with iron ions and accelerate the exothermal auto-combustion. The c-axis oriented growth of the film was thus deteriorated.