Laser-induced chemical etching of silicon in NF3 atmosphere

Chemical etching of single-crystal Si in an NF₃ atmosphere is performed by continuous irradiation with an Ar⁺ laser at 514.5 nm. The etching process proves to be a thermally stimulated chemical reaction between solid Si and NF₃ gas. The experimental results show how the depth and width of the etched grooves depend on laser power, scan speed, and gas pressure. The etch rates observed may exceed 25 m/s.     

Selective Formation of Spinel Iron Oxide in Thin Films by Complexing Agent-Assisted Sol-Gel Processing

The structure of iron oxide was controlled by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands such as diols. Iron oxides were prepared by calcining the precursor polymers obtained from iron nitrate nonahydrate and diols. When the diols were 1,2-pentanediol, 1,2-hexanediol and 1,2-octanediol, α-Fe₂O₃ with corundum structure appeared exclusively or as the main crystalline phase, in spite of the amount of diol used and the calcination temperature. In the case of 1,2-decanediol and 1,2-dodecanediol, when five moles of the diols were used to one mole of iron nitrate and the calcination temperatures were below 400°C, ψ-Fe₂O₃ with spinel structure appeared as the main phase and, when less than five moles of the diols were used, α-Fe₂O₃ appeared exclusively or as the main phase, irrespective of the calcination temperature. This tendency was also observed in thin films. Thus, a transparent magnetic film composed of γ-Fe₂O₃ could be prepared by applying a benzene solution of the iron polymer, obtained with 5 equivalents of 1,2-decanediol, on quartz and calcining the gel film at 350°C.     

Purification of a marine bacterial glucose dehydrogenase fromCytophaga marinoflava and its application for measurement of 1,5-anhydro-d-glucitol

A novel glucose dehydrogenase (GDH) from a marine bacteriumCytophaga marinoflava IFO 14170 was isolated from its membrane fraction. This GDH catalyzes the oxidation of a hydroxy group of glucose, but does not react in its C-l position. This enzyme is composed of a single peptide with a mol wt of 67,000. The GDH can react under high salinity. The optimum pH is around 8.0, showing a typical property of marine bacterial enzymes. Using this novel enzyme, an enzymatic determination of 1,5-anhydro-D-glucitol (1,5AG) utilizing 2,6-dichrolophenolindophenol (DCIP) and phenazine methosulfate (PMS) as electron mediators was caried out. A good linear correlation was observed from 0.5 mM to 4 mM of 1,5AG.     

Effect of Organic Ligands Used in Sol-Gel Process on the Formation of Mullite

The preparation of mullite by the sol-gel method using organic polydentate ligands and the effect of the raw materials and organic polydentate ligands on the formation of mullite were investigated. Two series of samples were prepared using tetraethoxyorthosilicate (TEOS) and aluminum nitrate nonahydrate, or dibutoxyethylacetoacetatoaluminum (Al(OBu)₂(AcAcEt)) as the silica and alumina sources, respectively, and using ethylene glycol (EG), 1,3-propanediol (PD), 1,3-butanediol (BD), 2-methyl-2, 4-pentanediol (MPD), diethlene glycol monoethyl ether (DEME) and ethoxyethanol as the ligands. When the alumina source was aluminum nitrate nonahydrate, mullite was apt to appear in the order of EG>PD>MPD. When Al(OBu)₂(AcAcEt) was the alumina source, the tendency toward the appearance of mullite crystalline phase was EG>BD>DEME>MPD. Between the two alumina sources, aluminum nitrate nonahydrate gave mullite much easier than Al(OBu)₂(AcAcEt). These relationships were discussed from the viewpoints of the coordination ability of the ligands and the miscibility between the silica and alumina.     

Synthetic Utilization of α-Phosphonovinyl Anions

The α-phosphonovinyl anions, generated in situ from treatment of β-hetero-substituted vinyl-phosphonates 1a-c with LDA (or LTMP), were trapped with various electrophiles such as chlorotriorganosilanes, chlorotrimethylgermane, chlorotriorganotins, dimethyl disulfide, and halogen to afford the corresponding β-hetero-substituted α-functionalized vinylphosphonates 2–14 in good to excellent yields. The Friedel-Crafts reaction of α-(silyl) or α-(germyl)phosphonoketene dithioacetals 2, 9 or 4 with acid chlorides gave α-acylated phosphonoketene dithioacetals 15–19 in 53–91 % yields. The palladium-catalyzed cross-coupling reaction of β-ethoxy-α-(tributylstannyl)vinylphosphonate 13 with a variety of organic halides (R = acyl, allyl, aryl etc.) provided β-ethoxy-α-substituted vinylphosphonates 20–25 in good to moderate yields. The palladium-mediated cross-coupling reaction of α-(iodo)-vinyl-phosphonates 7, 14 with terminal acetylenes afforded α-alkynylated vinylphosphonates 26–29 in 69–83 % yields.     

Infinite-dimensional attractors for parabolic equations with p-Laplacian in heterogeneous medium

In this paper we give a detailed study of the global attractors for parabolic equations governed by the p-Laplacian in a heterogeneous medium. Not only the existence but also the infinite dimensionality of the global attractors is presented by showing that their ε-Kolmogorov entropy behaves as a polynomial of the variable 1/ε as ε tends to zero, which is not observed for non-degenerate parabolic equations. The upper and lower bounds for the Kolmogorov ε-entropy of infinite-dimensional attractors are also obtained.     

The activation of molecular oxygen by horseradish peroxidase with sodium sulfite

Horseradish peroxidase (HRP) utilizes molecular oxygen (O2) with sodium sulfite (Na2SO3) to oxidize thioanisole and styrene at the exterior of the heme pocket.     

Optical probe using eccentric optics for optical coherence tomography

We propose and demonstrate an OCT optical probe using eccentric optics. This probe enabled both forward imaging and side imaging by dividing a circular scanning area into two semicircular scanning areas using an external motor to rotate the flexible tube. The outer diameter of the probe was 2.6 mm, and its rigid portion length was 10 mm. The lateral resolution was 23 μm, and the eccentric radius was 1.1 mm. The circumferential length in scanning was 6.9 mm, and the working distance was 5 mm. OCT images of 1.5 mm × 6.9 mm (in tissue, axial × circumference), including forward image and side image, were measured with the axial resolution of 19 μm in air and a frame rate of one frame per second. The epidermis, dermis, and sweat gland of in vivo human ventral finger tips were observed.     

Noise reduction combining time-domain epsilon-filter and time-frequency epsilon-filter

A time-domain epsilon-filter (TD epsilon-filter) is a nonlinear filter that can reduce noise while preserving a signal that varies drastically, such as a speech signal. Although the filter design is simple, it can effectively reduce noise. It is applicable not only to stationary noise but also to nonstationary noise. It cannot, however, be applied when the amplitude of noise is relatively large. This paper introduces an advanced method for noise reduction that applies an epsilon-filter to complex spectra, namely a time-frequency epsilon-filter (TF epsilon-filter). This paper also introduces noise reduction combining a TD epsilon-filter and a TF epsilon-filter. An advanced method called a variable time-frequency epsilon-filter is also proposed. First, the algorithm of the TD epsilon-filter is explained to clarify the problem. Then, the algorithms of the proposed methods are explained. By utilizing an epsilon-filter in the frequency domain, the proposed method can reduce not only noise that has a relatively small amplitude but also noise that has a relatively large amplitude. Experimental results are also given to demonstrate the performance of the proposed methods in comparison to the results of some conventional methods.