Poly(Methyl Methacrylate) as a matrix for immobilization of lipase

Poly(methyl methacrylate) (PMMA) was found to be suitable for the immobilization of lipase fromCandida rugosa. The best result based on hydrolytic activity was obtained by adsorption of the purified unbuffered enzyme solution onto PMMA beads without any modification of the beads. Prolonged exposure of the protein to the beads increased its adsorption but the expressed activity decreased after 1 h of exposure. The magnitude of the immobilized activity also varied with the size of the beads. Immobilization of the lipase shifted its optimal reaction temperature from 37 to 45°C. The immobilized enzyme is also more stable than the free enzyme in solution. The operational half-life of the immobilized lipase packed in a column and assayed in a closed system is 40 d.     

Polymer electrolyte for photoelectrochemical cell and dye-sensitized solar cell: a brief review

This paper reviews the use of solid polymeric electrolyte (SPE) and gel polymeric electrolyte (GPE) in photoelectrochemical cell (PEC) and dye-sensitized solar cell (DSSC). The structure of PEC and its working principle are presented. The various types of polymer electrolytes utilized in PEC and DSSC have been highlighted in this review. It also highlights the comparison of performance of PEC and DSSC utilizing those polymer electrolytes. This review is completed with the list of other SPEs that potentially be tested in DSSC.     

Asymmetric aldol reactions catalyzed by the promiscuous aldo–ketoreductase enzyme

The promiscuous aldo–ketoreductase (AKR) enzyme is used as a sustainable biocatalyst for the first time to catalyze asymmetric aldol reactions in aqueous medium. The reactions between aromatic aldehydes and cyclic/acyclic ketones give the corresponding products in moderate yields and enantioselectivities in the presence of water. The influence of solvents, the mole ratio of substrates, and enzyme concentration are investigated. The mechanism of the AKR1A1-catalyzed aldol reaction is also discussed.     

Effect of Experimental Variables on the Combustion Characteristics of Water-in-Diesel Emulsion Fuels

Water-in-diesel (W/D) emulsion fuels were prepared through an ultrasonic processor by using high energy emulsification method. Accordingly, the physical and chemical properties were analyzed. A decrease in viscosity was found in the emulsion fuel in contrast to the neat diesel which signifies the enhanced fluidity of the fuel. The emulsion fuel was then used to carry combustion tests in an internal combustion engine. A decrease in exhaust temperature was observed when a high surfactant to water ratio was used, which lead to minimal heat loss. As water is emulsified with diesel, effectiveness of combustion is improved rather than neat diesel fuel. It was also explored that the addition of water-in-diesel is influential in terms of reduction in exhaust gas emission such as carbon dioxide, carbon monoxide, ammonia from the internal combustion engine. Therefore, this type of emulsion fuel would be a useful contribution in the fuel economy, but also in making it environmentally friendly since diesel fuel is now considered one of the leading fuels causing ecological contamination.     

Effect of organic dye on the performance of dye-sensitized solar cell utilizing TiO2 nanostructure films synthesized via CTAB-assisted liquid phase deposition technique

This work is concerned with the growth of TiO₂ nanostructures as photovoltaic materials of dyesensitized solar cell (DSSC) via phase liquid deposition technique treated with CTAB surfactant. This work investigates the influence of organic dyes, N719, N3 and Z907 as photosensitizer on the photovoltaic parameters of TiO₂ nanostructures dye-sensitized solar cells (DSSCs). It also highlights the effect of the concentration of the best dye, N719 on the performance of the cell. The platinum films as counter electrode of the DSSC were prepared by sputtering platinum pellet on ITO substrate. The redox couple of the electrolyte utilized in the DSSC was iodide/triiodide. The cell sensitized with N719 dye demonstrated the best performance compared with the cell sensitized with another two dyes, N3 and Z907. This is due to N719 dye possess the highest optical absorption in visible region. The cell sensitized with 0.8 mM N719 dye performs the highest short-circuit current density, J _sc and power conversion efficiency, η since it posses the highest absorption in visible region. The DSSC utilizing 0.8 mM N719 dye demonstrated the highest J _sc and η of 6.48 mA cm^?2 and 1.69%, respectively.     

Contact welding study of carbon nanotube with ZnO nanowire

Study of proton beam induced welding of multiwall carbon nanotubes (MWCNTs) with ZnO nanowires (NWs) has been carried out by proton (H⁺) beam irradiation. The samples were irradiated by 70-keV proton (H⁺) ion beams at different substrate temperatures. The irradiation-induced defects in CNTs and ZnO NWs were greatly reduced at elevated temperature. The crystalline structure of ZnO NWs and MWCNTs were found to remain stable after the irradiation at 700 K. As a preparation step, a coupling of two parallel ZnO NWs with irradiation has also been demonstrated. The welding mechanisms of MWCNTs and ZnO NWs were also been suggested. These two welding processes between same and distinct nanostructures to form homo- and hetero-junctions have provided an opportunity to mass produce interconnecting one-dimensional structures used for the manufacturing of future nanowire-based electronic circuits and devices.     

Effect of Ge4+ and Mg2+ doping on superconductivity,fluctuation induced conductivity and interplanar coupling of TlSr2CaCu2O7−δ superconductors

Substitution of Ge⁴⁺ in place of Cu in Tl_0.85Cr_0.15Sr₂CaCu_2?xGe_xO_7?δ (x = 0–0.6) showed initial increase in zero critical temperature value, T_{c zero} from 98 K (x = 0) to 100 K (x = 0.1) and in the range of 85–86 K for x = 0.2–0.3. The slow decrease in T_{c zero} is unexpected as tetravalent Ge⁴⁺ substitution is expected to strongly reduce hole concentration in the samples and suppress T_{c zero}. Excess conductivity analyses of resistance versus temperature data based on Asmalazov–Larkin (AL) theory revealed that the substitution induced 2D-to-3D transition of fluctuation induced conductivity with the highest transition temperature, T_2D–3D observed at x = 0.1. FTIR spectroscopy analysis indicates Ge⁴⁺ substitution cause reduction in CuO₂/GeO₂ interplanar distance while our calculation based on Lawrence–Doniach model revealed highest superconducting coherence length, ξ_c(0) and interplanar coupling, J at x = 0.3. On the other hand, substitution of divalent Mg²⁺ for Ca²⁺ in (Tl_0.5Pb_0.5)(Sr_1.8Yb_0.2)(Ca_1?yMg_y)Cu₂O₇ (y = 0–1.0), which is not expected to directly vary hole concentration, surprisingly caused T_{c zero} to increase from 89.6 K (y = 0) to an optimum value of 95.9 K (y = 0.6) before decreasing with further increase in y. Excess conductivity analyses showed 2D-to-3D transition of fluctuation induced conductivity for all samples where the highest T_2D–3D was at y = 0.4. Similar calculation revealed highest values of ξ_c(0) and J also at y = 0.4. FTIR analysis of the samples indicates inequivalent Cu(1)O(2)Pb/Tl lengths and possible tilting of CuO₂ plane as a result of Mg²⁺ substitution. The increased ξ_c(0) and J as a result of the Ge⁴⁺ and Mg²⁺ substitutions are suggested to contributed to sustenance of superconductivity above 80 K in the samples.     

Solid state photoelectrochemical cells utilising graphite thin films counter electrode

This paper reports the use of graphite thin films as a counter electrode of a solid state photoelectrochemical cells of ITO/TiO₂/PVC-LiClO₄/graphite. The photoelectrochemical cells material was a screen-printed layer of titanium dioxide onto an ITO-covered glass substrate which was used as a working electrode of the device. The solid electrolyte used was PVC-LiClO₄ that was prepared by solution casting technique. The graphite films which serve as a counter electrode were prepared onto glass substrate by electron beam evaporation technique at substrate temperatures variation of 25, 50, 100, 150 and 200 °C. The dependence of sheet resistance and surface morphology of the graphite films on substrate temperature were studied. The films deposited at 25 °C shows the smoothest surface morphology and the smallest grain size. Bigger grain size, rougher surface morphology of graphite film counter electrode. The current-voltage characteristics of four devices utilising the graphite counter electrode with different substrate temperature in dark as well as under illumination of 100 mWcm⁻² light from a tungsten halogen lamp were recorded at room temperature and at 50 °C, respectively. It was found that the photovoltaic parameters of the device such as short-circuit current density, J_sc and open-circuit voltage, V_oc increases with the decreasing average grain size of the graphite counter electrode. The device whose graphite film counter electrode was deposited onto the glass substrate at 25 °C gave the highest J_sc of 0.32 μA/cm² and V_oc of 117 mV, respectively.     

Bacteriocin release protein-mediated secretory expression of recombinant chalcone synthase in Escherichia coli

Flavonoids are secondary metabolites synthesized by plants shown to exhibit health benefits such as anti-inflammatory, antioxidant, and anti-tumor effects. Thus, due to the importance of this compound, several enzymes involved in the flavonoid pathway have been cloned and characterized in Escherichia coli. However, the formation of inclusion bodies has become a major disadvantage of this approach. As an alternative, chalcone synthase from Physcomitrella patens was secreted into the medium using a bacteriocin release protein expression vector. Secretion of P. patens chalcone synthase into the culture media was achieved by co-expression with a psW1 plasmid encoding bacteriocin release protein in E. coli Tuner (DE3) plysS. The optimized conditions, which include the incubation of cells for 20 h with 40 ng/ml mitomycin C at OD₆₀₀ induction time of 0.5 was found to be the best condition for chalcone synthase secretion.