Principles,methodologies, and applications of photon activation analysis: a review

This review describes the basic principles of photon activation analysis (PAA) and gives an extensive overview of its numerous applications. Uses of PAA for environmental, biological, geological, archeological, and forensic samples are reviewed. Both scientific and industrial applications of PAA are covered. Potential future uses of PAA are addressed.     

Gold bearing ore assays using 197Au(γ,n)196Au photonuclear reaction

We performed computational and experimental studies of the feasibility of the gold bearing ore assay utilizing the ¹⁹⁷Au(γ,n)¹⁹⁶Au photonuclear reaction. Gold bearing silicate samples were irradiated using bremsstrahlung produced by an electron accelerator with endpoint energies ranging from 25 to 40 MeV. ¹⁹⁶Au yield simulations were benchmarked and experimental results were in good agreement with the predictions. Optimum electron beam energy for photon activation analysis was found to be around 32 MeV which corresponded to a detection limit of 80 ppb. Two-hour gamma-spectroscopy measurements were repeated every 24 h and the optimum sample cooling time was found to be about 100–160 h.     

Unusual conformation of molecular cylindrical brushes strongly adsorbed on a flat solid surface

Conformational properties of comb-like polymers strongly adsorbed on a flat solid surface were investigated using computer simulation and scanning force microscopy. The computer simulation showed that the macromolecules with asymmetric distribution of the side chains relatively to the backbone are effectively in a collapsed state even under conditions of a good solvent. They formed peculiar helical superstructures which could be observed by scanning force microscopy of cylindrical brushes of polymethylmethacrylate on mica. Received 13 September 1999     

Vibrational spectroscopy and normal-mode analysis of Fe(II) octaethylporphyrin

The normal-mode spectrum for the four-coordinated heme compound Fe(II) octaethylporphyrin, Fe(OEP), has been determined by refining force constants to the experimental Fe vibrational density of states measured with nuclear resonance vibrational spectroscopy (NRVS). Convergence of the calculated spectrum to the data was achieved by first imposing D4 symmetry on the model structure as well as the force constants, progressively including different internal coordinates of motion, then allowing the true Ci (or S2) point group symmetry of the C(i)1 Fe(OEP) crystal structure. The NRVS-refined normal modes are in good agreement with Raman and IR spectra at high frequencies. Prior density functional theory predictions for a model porphyrin are similar to the core modes computed with the best-fit force field, but significant differences between D4 and Ci modes underline the sensitivity of porphyrin Fe normal modes to structural details. Some differences between the Ci best fit and the NRVS data can be attributed to intermolecular contacts not included in the normal-mode analysis.     

Sterically Facilitated Intramolecular Nucleophilic NMe2 Group Substitution in the Synthesis of Fused Isoxazoles: Theoretical Study

The influence of steric repulsion between the NMe₂ group and a second ortho-(peri-)substituent in the series of 1-dimethylaminonaphthalene and N,N-dimethylanilene ortho-oximes on the ease of the NMe₂ group’s intramolecular nucleophilic substitution is studied. Possible reaction intermediates for three mechanisms are calculated (ωB97xd/def-2-TZVP), and their free Gibbs energies are compared to model reaction profiles. Supporting experiments have proved the absence of studied reactivity in the case of simple 2-dimethylaminobenzaldoxime, which allowed us to establish reactivity limits. The significant facilitation of NMe₂ group displacement in the presence of bulky substituents is demonstrated. The possibility of fused isoxazoles synthesis via the intramolecular nucleophilic substitution of a protonated NMe₂ group in the aniline and naphthalene series is predicted.     

Chemical Composition and Potential Practical Application of 15 Red Algal Species from the White Sea Coast (the Arctic Ocean)

Though numerous valuable compounds from red algae already experience high demand in medicine, nutrition, and different branches of industry, these organisms are still recognized as an underexploited resource. This study provides a comprehensive characterization of the chemical composition of 15 Arctic red algal species from the perspective of their practical relevance in medicine and the food industry. We show that several virtually unstudied species may be regarded as promising sources of different valuable metabolites and minerals. Thus, several filamentous ceramialean algae (Ceramium virgatum, Polysiphonia stricta, Savoiea arctica) had total protein content of 20–32% of dry weight, which is comparable to or higher than that of already commercially exploited species (Palmaria palmata, Porphyra sp.). Moreover, ceramialean algae contained high amounts of pigments, macronutrients, and ascorbic acid. Euthora cristata (Gigartinales) accumulated free essential amino acids, taurine, pantothenic acid, and floridoside. Thalli of P. palmata and C. virgatum contained the highest amounts of the nonproteinogenic amino acid β-alanine (9.1 and 3.2 μM g⁻¹ DW, respectively). Several red algae tend to accumulate heavy metals; although this may limit their application in the food industry, it makes them promising candidates for phytoremediation or the use as bioindicators.     

Photocatalytic Oxidation of HMF under Solar Irradiation: Coupling of Microemulsion and Lyophilization to Obtain Innovative TiO2-Based Materials

The photocatalytic oxidation of biomass-derived building blocks such as 5-hydroxymethylfurfural (HMF) is a promising reaction for obtaining valuable chemicals and the efficient long-term storage of solar radiation. In this work, we developed innovative TiO₂-based materials capable of base-free HMF photo-oxidation in water using simulated solar irradiation. The materials were prepared by combining microemulsion and spray-freeze drying (SFD), resulting in highly porous systems with a large surface area. The effect of titania/silica composition and the presence of gold-copper alloy nanoparticles on the properties of materials as well as photocatalytic performance were evaluated. Among the lab-synthesized photocatalysts, Ti₁₅Si₈₅ SFD and Au₃Cu₁/Ti₁₅Si₈₅ SFD achieved the higher conversions, while the best selectivity was observed for Au₃Cu₁/Ti₁₅Si₈₅ SFD. The tests with radical scavengers for both TiO₂-m and Au₃Cu₁/Ti₁₅Si₈₅ SFD suggested that primary species responsible for the selective photo-oxidation of HMF are photo-generated electrons and/or superoxide radicals.     

Isoleucine Residues Determine Chiral Discrimination of Odorant-Binding Protein

Enzymes, receptors, and carrier proteins discriminate between enantiomers of natural and synthetic chemicals. Whereas the structural details of this phenomenon have been investigated in enzymes and receptors, much less is known for carrier proteins of hydrophobic ligands, particularly concerning the contribution of asymmetric centers in the side chains of amino acids to chirally selective binding. Working with a pig odorant-binding protein, we have found that the replacement of either one or both isoleucine residues in the binding pocket by leucines abolishes discrimination of menthol and carvone enantiomers. The results indicate that isoleucines are crucial for chiral discrimination of hydrophobic ligands, and that asymmetry in the side chain may be as important as the overall asymmetry of the protein. The results provide suggestions and guidelines for improving chiral selectivity of binding proteins and enzymes, with consequent applications in the production of enantiomerically pure drugs.     

Synthesis and Flocculating Power of Pyridinium Polyelectrolytes

Synthesis of poly(1,2-dimethyl-5-vinylpyridinium methyl sulfate) and its copolymers with hydrophilic monomers by (co)polymerization initiated with water-soluble peroxides is studied. The flocculating activity of polyelectrolytes is determined in aqueous kaolin suspensions and also in dewatering of an active sludge.