An Enzyme‐free H2O2 Sensor Based on Poly(2‐Aminophenylbenzimidazole)/Gold Nanoparticles Coated Pencil Graphite Electrode

A poly(2‐aminophenylbenzimidazole)/gold nanoparticles (P2AB/AuNPs) coated disposable pencil graphite electrode (PGE) was fabricated as an enzyme‐free sensor for the H₂O₂ determination. P2AB/AuNPs and P2AB were successfully synthesized electrochemically on PGE in acetonitrile for the first time. The coatings were characterized by scanning electron microscopy, X‐ray diffraction spectroscopy, Energy‐dispersive X‐ray spectroscopy, Surface‐enhanced Raman spectroscopy, and UV‐Vis spectroscopy. AuNPs interacted with P2AB as carrier enhances the electrocatalytic activity towards reduction of H₂O₂. The analytical performance was evaluated in a 100 mM phosphate buffer solution at pH 6.5 by amperometry. The steady state current vs. H₂O₂ concentration is linear in the range of 0.06 to 100 mM (R²=0.992) with a limit of detection 3.67×10^?5 M at ?0.8 V vs. SCE and no interference is caused by ascorbic acid, dopamine, uric acid, and glucose. The examination for the sensitive determination of H₂O₂ was conducted in commercially available hair oxidant solution. The results demonstrate that P2AB/AuNPs/PGE has potential applications as a sensing material for quantitative determination of H₂O₂.     

One-step electrochemical deposition of thin film titanium suboxide in basic titanyl sulfate solution at room temperature

Journal of Solid State Electrochemistry - This study reports direct electrodeposition of TiOx thin films on ITO substrate from an acetonitrile solution containing titanyl sulfate and tetra n-butyl...     

Performance of different crystal structures of PbO2 on electrochemical degradation of phenol in aqueous solution

Phenol degradation was carried out in acidic aqueous solution on different crystal structures of PbO₂ surfaces at room temperature. Phenol, benzoquinone and maleic acid concentrations were monitored during the electrolysis process. It was determined that β surfaces have higher performance than surfaces on phenol degradation. Then, the effect of crystallinities of pure β-PbO₂ surfaces was investigated and found that higher crystallinity increased the efficiency of the phenol degradation process.     

Electrochemical behavior of polyaniline films in acetonitrile

The electro-oxidation and electroreduction behavior of polyaniline films in acetonitrile in the absence and presence of added acid or base were investigated using cyclic voltammetry. A general mechanism is proposed that enables the interpretation of the electroactivity loss and the catalytic and autocatalytic properties of the film. The electroactivity loss was found to be a reversible phenomenon which is accelerated in alkaline solutions through deprotonation. Electroactivity was recovered when the electroinactive films were reduced in an acidic solution. The films that lose their electroactivity on electro-oxidation were found to be conducting, and various cation radicals in the structure are believed to be responsible for this nonprotonic conductivity. The proton content of the polyaniline film was found to be crucial in determining its electrochemical and physical properties. Autocatalysis was detected when protons were produced electrolytically in situ during electropolymerization.     

Electrochemically controlled solid-phase microextraction (EC-SPME) based on overoxidized sulfonated polypyrrole

A method for the extraction and selective determination of cations is proposed using electro-synthesized overoxidized sulfonated polypyrrole film. The polymer film is used for the selective extraction of trace levels of nickel and cadmium ions by solid-phase microextraction (SPME). The cation uptake and release properties of the overoxidized sulfonated polypyrrole film electrode were examined under both open circuit and controlled potential conditions for prospective applications in electrochemically controlled solid-phase microextraction. Increased extraction efficiency and selectivity toward cations were achieved in high saline content of water. Simple preparation of film coatings on a platinum wire was possible using a constant potential method. Applied positive and negative potentials facilitated the extraction and desorption of cations, respectively. Nickel and cadmium ions were desorbed into sample aliquot and determined by electrothermal atomic absorption spectrometry (ETAAS). The cation uptake and release mechanism is affected both by the cation exchange at the negative sulfonate and carboxylate moiety on the film and the altered solution pH occurring at the counter electrode caused by the applied potential. The method was validated using a standard reference material and tested for the determination of cadmium ion in commercial table salt samples.     

Carbon nanotubes/alizarin red S–poly(vinylferrocene) modified glassy carbon electrode for selective determination of dopamine in the presence of ascorbic acid

A modified electrode was fabricated by electrochemical formation of poly(vinylferrocene) on the multi-wall carbon nanotube-alizarin red S matrix covered glassy carbon electrode. A higher electrochemical activity was obtained to the electrocatalytic oxidation of dopamine. The electrode surface was characterized electrochemically and spectroscopically. Poly(vinylferrocene) (PVF) in electrode was used as an electron transfer mediator in the electrochemical oxidation of compounds due to its perfect reversible redox properties. Multi-wall carbon nanotubes (MWCNTs) / alizarin red S (ARS)–PVF electrode was used to the determination of dopamine in the presence of ascorbic acid in 0.1 M sulphate buffer solution at pH 7. The performance of the MWCNTs/ARS–PVF electrode was evaluated by DPV and amperometry.     

Amperometric enzyme electrode for glucose determination based on poly(pyrrole-2-aminobenzoic acid)

Polymerization of pyrrole and 2-aminobenzoic acid has been investigated, and a functionalized stable film of poly(pyrrole-2-aminobenzoic acid) (PP2ABA) has been obtained electrochemically onto platinum electrode. Different cyclic voltammetric behavior is obtained for polypyrrole and PP2ABA during electrosynthesis. Fourier-transformed infrared spectrometry and surface-enhanced Raman spectrometry measurements on the two films have confirmed the presence of carboxylate group in the films. The enzyme, glucose oxidase, was covalently immobilized on a conducting PP2ABA film, and amperometric response was measured as a function of concentration of glucose at a potential of 0.7 V vs Ag/AgCl in 0.1 M phosphate buffer at pH 6.2. The effect of polymeric film thickness, pH, and possible interferents were investigated. The linear range of the calibration curve is from 3 to 40 mM with a sensitivity of 0.058 μA mM⁻¹ cm⁻² and a limit of detection of 0.5 mM. The apperent Mishaelis–Menten constant K _M is calculated to be 1 × 10⁻² mM, and the response time is 5 s.     

Poly(vinylferrocenium) perchlorate–polyaniline composite film-coated electrode for amperometric determination of hydroquinone

Poly(vinylferrocenium) perchlorate–polyaniline (PVF⁺–PANI) composite film was synthesized electrochemically on Pt electrode in a methylene chloride solution containing a mixture of poly(vinylferrocene) (PVF) polymer and aniline monomer. PVF⁺ polymer in the composite film was used as an electron transfer mediator. The composite coating showed significant electrochemical activity towards hydroquinone (HQ) at pH 4, with high sensitivity and a wide linearity range. The interaction of HQ with PVF⁺ and PANI homopolymer films was investigated electrochemically and spectroscopically. HQ molecules are accumulated on the electrode surface due to trapping by both polymers in the composite film and then oxidized catalytically by PANI. The most significant contribution of PVF⁺ polymer is that it facilitates electron transfer in the composite film. The linear response range was found to be between 1.60 × 10⁻⁴ mM and 115 mM (R ² = 0.999) at 0.45 V vs saturated calomel electrode. The limit of detection (LOD) was 4.94 × 10⁻⁵ mM.     

A new self-doped copolymer consisting of 3-methyl thiophene and aniline units

The copolymer films of sulfonated aniline and sulfonated 3-methyl thiophene were synthesized by electrochemical polymerization. The sulfonated copolymer films have better solubility in DMSO and KOH than the corresponding homopolymers. The conductivity of the copolymer films increase with the increase in the number of thiophene rings in the polymeric backbone. Copolymer films synthesized were investigated by cyclic voltammetry, UV-visible and FT-IR spectroscopy, dry conductivity and intrinsic viscosity measurements and elemental analysis. The elemental analysis and UV-visible spectroscopic results show that copolymer films have properties intermediate between the two homopolymers.     

Antioxidant activity of whey protein fractions isolated by gel exclusion chromatography and protease treatment

Whey proteins were isolated from whey powder by a combination of gel exclusion chromatography and protease (pepsin or trypsin) treatment. Whey solution (6g/dl) was applied to Sephadex G-200 column chromatography and three fractions were obtained. Gel electrophoresis (SDS-PAGE) was used to identify the fractions; the first one contained immunoglobulins and bovine serum albumin, the second contained beta-lactoglobulin and alpha-lactalbumin whereas the third fraction contained small peptides. We have also subjected the whey filtrate to proteases (pepsin and trypsin). Treatment with proteases showed that beta-lactoglobulin can be obtained after hydrolysis of the second fraction with pepsin. When the whey filtrate was treated with pepsin and then applied to Sephadex G-200 column chromatography three fractions were obtained; the first one was bovine serum albumin, the second was beta-lactoglobulin and the third fraction contained small peptides. After trypsin treatment only two fractions were obtained; the first one was serum albumin and the second fraction was an alpha-lactalbumin rich fraction. We have determined the antioxidant activity of the fractions using an assay based on the measurement of superoxide radical scavenging activity. Our results showed that among the three fractions, the first fraction had the highest superoxide radical scavenging activity. Also, protease treatment of the second fraction resulted in an increase in the antioxidant activity.