Thermal management of modern electric vehicle battery systems (MEVBS)

Journal of Thermal Analysis and Calorimetry - The operating temperature of Li-ion batteries used in modern electric vehicles should be maintained within an allowable range to avoid thermal runaway...     

Numerical Modeling of Solitons in a Low Birefringent Optical Fiber

A numerical investigation, based on the split-step Fourier transform algorithm of all optical switching of solitons in a low birefringent optical fiber is presented. The numerical algorithm is described in detail. This revised version was published online in August 2006 with corrections to the Cover Date.     

Large-volume stacking in capillary electrophoresis using pH hysteresis of the electroosmotic flow in a bare fused-silica capillary

For large-volume stacking with the electroosmotic flow pump (LVSEP) in capillary electrophoresis of anionic analytes it is required that the electroosmotic mobility (EOM) should be smaller than the magnitudes of the effective mobilities of the analytes. When a fused-silica capillary is treated with an acidic solution, the silanoate group on the silica surface is neutralized to silanol and the EOM is suppressed. Due to the slow deprotonation equilibrium of the silanol group at an intermediate pH, this reduced EOM can be retained during a number of electrophoresis runs. Using a bare fused-silica capillary preconditioned with 0.01 M HCl, successful LVSEP at pH 6.0 was achieved for weakly acidic compounds with two orders of magnitude enhancements in the concentration sensitivity. The repeatability in migration times of ten analytes stacked by LVSEP in a single day was excellent with the relative standard deviation (RSD) less than 1% (n = 6). The day-to-day repeatability was also excellent with RSD less than 3% (n = 3 x 6) when the capillary was preconditioned each day.     

Titanium(IV) tungstosilicate and titanium(IV) tungstophosphate: two new inorganic ion exchangers

Crystalline phases of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been synthesised. The ion-exchange capacities of Ti(IV) tungstosilicate and Ti(IV) tungstophosphate have been reported as 0.44 and 0.80 mequiv./g, respectively. Both materials show monofunctional ion-exchange characteristic and are stable in 0.1 M solutions of HNO3, HCl, H2SO4 and acetone and benzene. Ti(IV) tungstosilicate is found to be more stable thermally than Ti(IV) tungstophosphate (loss in ion-exchange capacity was found as 58 and 80%, respectively for samples heated at 200 degrees C). The Kd values for heavy metals such as Pb, Hg, Cd, Sb, Co, Zn, Ni, Fe, Cr etc. have been reported in demineralised water and two surfactant media by batch processes. Cr3+, Fe3+ and Sn4+ are totally adsorbed on both the materials in demineralised water while a decrease in Kd value with increase in concentration of two surfactants is reported. On the basis of Kd values for metal ions, thirteen binary separations and five ternary separations on Ti(IV) tungstosilicate and thirteen different binary separations and four different ternary separations on Ti(IV) tungstophosphate have been achieved. Separation of methylamine from ethylamine has been done by GC on a column packed with Ti(IV) tungstophosphate.     

Synthesis and structural characterization of a new heterobimetallic coordination complex of barium and cobalt for use as a precursor for chemical vapor deposition

Ba(dmae)2 (dmaeH=N,N-dimethylaminoethanol, C4H11NO) reacts with Co(acac)2 (acac=2,4-pentanedionate) to produce the trinuclear coordination complex [Ba2Co(acac)4(dmae)3(dmaeH)] in an 85% yield. Spectroscopic and single-crystal X-ray diffraction experiments indicate that the complex possesses a structure in which two barium atoms and a cobalt atom are bridged by acac and dmae groups. The barium centers are eight and nine coordinate with BaO7N and BaO7N2 coordination spheres while the cobalt is a more regular CoO5N octahedron. This 2:1 heterobimetallic molecular complex was investigated as precursor for the deposition of thin film by AACVD. The film was characterized by SEM and XRD. TGA shows that the complex starts thermal decomposition upon heating in nitrogen atmosphere at 105 degrees C to produce barium cobalt oxide material of a Ba2CoO3 composition with an orthorhombic structure. The synthetic approach detailed here represents a unique route to the formation of a heterobimetallic barium cobalt coordination complex.     

A novel hyperbranched polyester acrylate used for microfabrications

A novel hyperbranched polyester acrylate (HPEA) was synthesized based upon ethylenediamine tetraacetic acid as a “core” molecule, 5‐hydroxyisophthalic acid as an AB₂ monomer, and 2‐hydroxyethyl acrylate as an endcapping reagent. The obtained oligomer has an unsaturation concentration of 4.10 mmol_C?C g^?1 measured by nuclear magnetic resonance and a wide molecular weight distribution of 1.64 measured by gel permeation chromatography. The two‐photon absorption (TPA) photopolymerization of HPEA under the exposure of a Ti : sapphire femtosecond laser with a wavelength of 800 nm was investigated through laser exposure dose‐dependant spatial resolutions of its resins. The TPA photopolymerization thresholds at the range 1.6–4.3 × 10⁷ mJ cm^?2, and exposure dose windows at the range 3.4–4.3 for three formulations were determined. A spatial resolution of 0.85 μm was obtained through the TPA photopolymerization of the formulation containing 1 wt% photoinitiator and 0.3 wt% photoinhibitor. A diffraction grating and real three‐dimensional coupled gear wheel created by TPA photopolymerization were described to demonstrate the unique capability of HPEA in microfabrications. Copyright © 2004 John Wiley & Sons, Ltd.     

Amino acid recognition of pyridine bis(oxazoline)-copper(II) complex in aqueous solvent

Enantioselective recognition of amino acids has been studied with C₂-symmetric chiral pyridine bis(oxazoline)-copper(II) complexes at physiological pH condition. UV-visible titration revealed strong binding of submillimolar dissociation constant between pyridine bis(oxazoline)-copper(II) complex and amino acids in aqueous solution. Moderate selectivity of up to 2:1 between d- and l-amino acids was achieved. The enantiomers were baseline resolved by capillary electrophoresis, using the bis(l-lysine)-copper(II) complex as a chiral selector.