［La（EO_3）_3（H_2O）］（ClO_4）_3·H_2O的晶体结构

稀土高氯酸盐开环冠醚三缩乙二醇（ＥＯ_３）［Ｌａ（Ｃ_６Ｈ_（１４）Ｏ_４）_３（Ｈ_２Ｏ）］（ＣｌＯ_４）_３·Ｈ_２Ｏ，单斜晶系，Ｐ２_１／ｃ空间群。晶胞参数为：ａ＝１５．４７４（２），ｂ＝１１．３８６（１），ｃ＝２０．８４１（４），β＝９９．８２（１）°，Ｖ＝３６１８（１），ＭｏＫα，Ｚ＝４，Ｄ_ｃ＝１．７１８ｇ／ｃｍ３，μ＝１．４９９ｍｍ￣（－１）。全矩阵最小二乘精细修正，结构因子Ｒ＝０．０５６，Ｒ_ｗ＝０．０８３。中心原子Ｌａ与开环冠醚醚链上的Ｏ（１）～Ｏ（９）及一个水分子形成１０配位双帽四方反棱柱结构。弱配体高氯酸根不参加配位。     

CeO_2-ZrO_2-Al_2O_3稀土储氧材料制备工艺的研究

采用化学沉淀法制备了系列CeO2-ZrO2-Al2O3稀土储氧材料,并用BET,XRD和储氧性能测定等表征手段考察了陈化时间、La2O3含量、反应pH和沉淀方式等工艺因素对CeO2-ZrO2-Al2O3比表面积、储氧性能和结构的影响。结果表明:当陈化时间为12 h,反应pH=10时,掺杂2%(质量分数)La2O3的CeO2-ZrO2-Al2O3样品在老化前后均具有很高比表面积和良好的储氧性能,并且pH为影响样品比表面积及热稳定性能的主要因素。与一步法沉淀相比,二步法制得的CeO2-ZrO2-Al2O3样品具有很高的热稳定性能,1050℃老化5 h后的样品比表面积高达46.4 m2.g-1,但储氧性能略差,这与Al2O3对CeO2-ZrO2的结构影响程度有关。     

高岭石粒度对Pickering乳液稳定性的影响

固体乳化剂颗粒粒径是影响Pickering乳液稳定性的重要因素.本文以去离子水为水相,液体石蜡为油相,高岭石为乳化剂制备水包油型Pickering乳液,研究了高岭石粒度对乳液稳定性的影响.结果表明:高岭石颗粒与乳液液滴大小之间的匹配特征不仅影响乳化剂与乳液分散相表面之间的作用强度,而且影响其在连续相中形成网络结构的特征,进而影响乳液稳定性.高岭石粒度对乳液稳定的影响存在最佳值,当高岭石颗粒粒度D90值为1.42μm时,乳液粘度为378 mPa·s,乳液液滴粒径均匀,乳化剂颗粒在油水界面有序紧密分布,颗粒在连续相所形成三维网络结构趋于牢固,乳液稳定性好.当乳化剂颗粒粒度较小时,体系中的颗粒易受布朗运动因素影响,乳液液滴聚并速度快,乳液粘度低;而当乳化剂颗粒粒度较大时,油水界面上以及连续相中的颗粒易受自身重力的影响发生沉降,破坏三维网络结构,导致乳液粘度降低,乳液稳定性变差.     

贵金属基纳米催化剂在乙醇电催化氧化中的应用

乙醇电催化氧化反应是直接乙醇燃料电池的核心步骤之一,制备高效稳定的电催化材料已经成为提升其电催化反应效率和选择性的关键。贵金属基纳米催化剂以其独特的物理和化学特性,在乙醇电催化氧化中表现出优异的电催化性能,在燃料电池领域具有重要的应用前景。近来贵金属基乙醇氧化催化剂受到广泛关注并取得系列重要研究进展。本文主要介绍催化剂元素组成调变形成多元素协同作用、形貌调控暴露高指数晶面和载体选择提升分散性等三个方面对贵金属基纳米催化剂性能的影响,为后续研究设计高效稳定的直接乙醇燃料电池催化剂提供参考。     

高岭石结构缺陷的 1H MAS NMR和Raman研究

The structure default of kaolinites was characterized with ¹H MAS NMR and Raman spectra. Although the HI indexes of Suzhou and Maoming kaolinite are similar, their ¹H MAS NMR and Raman spectra are very different. ¹H MAS NMR showed that the hydroxyl proton chemical shifts of Suzhou kaolinite are in the higher field and with larger different between the inner surface hydroxyls protons and inner hydroxyls proton chemical shifts than Maoming kaolinite. Raman spectra showed that the surface hydroxyls stretching vibration bands of Suzhou kaolinite are in the high frequency region, and the half height widths of the bands are 7.0～14 cm^-1. The area ratio S_z/(S_z+S_A), where S_Z and S_A are the areas of bands 3685 cm^-1 and 3695 cm^-1 respectively, is 0.23. But the surface hydroxyls stretching vibration bands of Maoming kaolinite are in the low frequency region, and the half height widths of the bands are 8.9～15.1 cm^-1. The area ratio S_z/(S_z+S_A) is 0.77. Those data proved that Suzhou kaolinite has lower structure default than Maoming kaolinite and ¹H MAS NMR and Raman spectra are effective method for study of kaolinite structure default.     

高岭石/聚丙烯酰胺插层复合物的制备与表征

The kaolinite-polyacrylamide intercalation compound was prepared first by the displacement reaction of the kaolinite-formamide intercalation precursor with 30% acrylamide ethanol solution, and then the polymerization under 140℃ for 15h with the catalysis of dibenzoyl peroxide. The XRD analyses showed that the basal spacings of kaolinite-acrylamide intercalation compound and kaolinite-polyacrylamide compound were 1.135nm and 1.144nm respectively. The kaolinite-polyacrylamide compound was able to resist to 30-min washing with water, but the kaolinite-acrylamide compound was unstable during washing. FT-IR proved that the hydrogen bonds were formed between kaolinite Si-O group and polyacrylamide NH group and between kaolinite inner surface hydroxyl and polyacrylamide C=O group, and that parts of NH group keyed into the kaolinite ditrigonal hole. TG and DTG analysis proved that kaolinite-polyacrylamide was stable under 350℃. A net weight loss of 16.63% between 370℃～500℃ is due to the removal of intercalated polyacrylamide from the interlamellar space of kaolinite. These results clearly indicate that acrylamide has been intercalated into the layers of kaolinite and was polymerized in-situ.Based on the TG data, the formula of the kaolinite-polyacrylamide intercalation compound, Al₂Si₂O₅(OH)₄?CH₂CHCONH₂?_0.736, can be calculated.     

高岭石插层效率评价

用基于X射线衍射分析(XRD)的插层率、基于热重分析(TGA)的热失重率和基于红外光谱分析(FTIR)的3 600 cm^-1谱带与3 700 cm^-1谱带强度比值对高岭石/二甲基亚砜(DMSO)插层复合物和高岭石/N-甲基甲酰胺(NMF)插层复合物的插层效率进行了综合评价。结果表明,当插层反应进行到1、6和25 d,高岭石/DMSO的插层率分别为5%、52%和89%;而高岭石/NMF的插层率则分别为93%、94%和95%。与此同时,高岭石/DMSO的热失重率分别为1.06%、8.06%和17.46%;而高岭石/NMF的失重率分别为6%、6.5%和14.2%。在红外光谱图中,高岭石/DMSO复合物的3 600与3 700 cm^-1带强度比分别为1.03,1.141和1.628,而高岭石/NMF复合物分别为1.403,1.433和1.612。3种评价方法显示很好的一致性,相对而言,在插层作用的初期,XRD方法比较灵敏,而在插层作用的后期,TGA和FTIR方法则显得更为灵敏和有效。     

[HO (E02)3] (C104)3·3H 20的晶体结构

稀土Ho高氛酸盐开环冠醚二缩乙二醇[Ho(EOZ),}(C10,)3 " 3H稀土Ｈｏ高氯酸盐开环冠醚二缩乙二醇「Ｈｏ（ＥＯ２）３」（ＣｌＯ４）３．３Ｈ２Ｏ属单斜晶系，Ｐ２１／ｎ空间群，晶胞参数ａ：＝１４．０８７，ｂ＝１４．０３９，ｃ＝１５．０１４，β＝９５．６４，Ｖ＝２９５５，ｚ＝４，Ｄｃ＝１．８６５ｇ／ｃｍ＾３μ（ＭｏＫａ）＝３．０７ｍｍ＾－１，全矩阵最小二乘修正，最终结构子Ｒ＝０．０７４。     

“卡房”结构LDHs负载Pt纳米催化剂用于乙醇电催化氧化

乙醇电催化氧化是直接乙醇燃料电池(DEFCs)的核心反应,而DEFCs的阳极电催化剂是提升乙醇转化效率的关键。Pt作为最稳定、最有效的催化剂之一,仍面临着成本高、容易被乙醇氧化产生的中间产物毒化等问题。选择合适的载体实现Pt的高度、均匀、稳定分散,不仅可以提高其抗中毒能力和催化活性,而且还可以减少Pt用量降低成本。本文采用两步电化学沉积法合成了层状双金属氢氧化物(LDHs)纳米阵列负载Pt纳米催化剂(Pt/LDHs/NF),具有“卡房”结构的LDHs增强了Pt纳米粒子的分散,有助于实现高效的乙醇电催化氧化性能。制备的Pt/NiFe-LDH/NF在碱性环境下对乙醇表现出最优的电催化氧化活性,峰值电流密度达到171.99mA·cm^-2。这可为今后设计和制备均匀、稳定分散的Pt基催化剂用于乙醇电催化氧化提供借鉴。