Study of DNA coated nanoparticles as possible programmable self-assembly building blocks

Nanoparticles coated with single stranded DNA have been shown to efficiently hybridize to targets of complementary DNA. This property might be used to implement programmable (or algorithmic) self-assembly to build nanoparticle structures. However, we argue that a DNA coated nanoparticle by itself cannot be used as a programmable self-assembly building block since it does not have directed bonds. A general scheme for assembling and purifying nanoparticle eight-mers with eight geometrically well-directed bonds is presented together with some preliminary experimental work.     

Application of the JKR Method to the Measurement of Adhesion to Langmuir-Blodgett Cellulose Surfaces

The JKR method has been applied for studying adhesion between poly(dimethylsiloxane) (PDMS) caps and Langmuir–Blodgett cellulose surfaces including the substrate, hydrophobized mica, and two flat mineral surfaces, bare mica and glass. The self-adhesion of PDMS caps and oxidized PDMS caps are included as a reference to compare with literature data. The results of the measurements have been compared with previous studies using the surface force apparatus and similar systems. A satisfactory agreement is obtained for simple systems showing no, or very limited, hysteresis between loading and unloading curves. In several cases, however, a large hysteresis is found between loading and unloading curves, with a larger adhesion measured from the pull-off force than from the JKR-curve determined on loading. This is, for instance, the case for PDMS against cellulose. The situation is analogous to that found in wetting studies showing a large hysteresis between advancing and receding contact angles.     

Determination of Fibre Pore Structure: Influence of Salt,pH and Conventional Wet Strength Resins

It has been shown, in the present investigation, that the two methods used to investigate the pore size distribution of unbleached chemical pulps, i.e. inverse size exclusion chromatography (ISEC) and nuclear magnetic resonance (NMR), give different average pore radius for the pores inside the fibre wall. This is due to the way in which these experiments are performed and the sensitivity of the methods to different types of pores in the cell wall. It was also shown that the two methods gave different results when changing the pH and the ionic strength of the pulp suspension. The pore radius, as detected with ISEC, decreased with both increasing ionic strength and decreasing pH, indicating a loose structure of the exterior of the fibrillar network. However, the pore radius as detected with NMR, was virtually unaffected when increasing the ionic strength, indicating a very rigid structure of the interior of the fibre wall. Decreasing pH though, lead to a decrease in pore radius indicating that upon protonation of the carboxylic groups in the fibre wall, the electrostatic repulsion is diminished and the average pore radius decreases. The NMR technique was also used to study wet strength aid penetration into the fibre wall. It was shown that wet strength aids with a small molecular weight, penetrated the fibre wall, as detected by a decrease in pore radius. It was also shown that addition of different wet strength aids increased the tensile index of the sheet and decreased the fibre strength, measured as zero span-strength of the sheets.     

Chiral synthesis of (2s,3s,7s)-3,7-dimethylpentadecan-2-yl acetate and propionate,potential sex pheromone components of the pine saw-fly neodiprion sertifer (geoff.)

A synthesis of (2S,3S,7S)-3,7-dimethylpentadecan-2-yl acetate ($\text{2}$) and propionate ($\text{3}$) is described. (2S)-2-Methyldecan-1-yl lithium ($\text{5}$) was reacted with (3S,4S)-3,4-dimethyl-γ-butyrolactone ($\text{6}$) to yield the ketoalcohol $\text{19}$ which upon Huang-Minlon reduction furnished (2S,3S,7S)-3,7-dimethylpentadecan-2-ol ($\text{1}$). Acylations gave the esters $\text{2}$ and $\text{3}$. The (2S)-2-methyldecan-1-yl lithium was obtained via asymmetric synthesis. The chiral lactone $\text{6}$ was obtained from (2S,3S)-trans-2,3-epoxybutane and dimethyl malonate.     

The use of polymeric amines to enhance the mechanical properties of lignocellulosic fibrous networks

Cationic polyelectrolytes (polyallylamine and polyvinylamine with different molecular masses) were adsorbed onto lignocellulosic fibres from unbleached and unbeaten spruce chemical fibres with different kappa numbers to investigate the effects on the mechanical properties of the final paper materials. Adsorption isotherms were first established to determine the maximum quantity of polymer that could be adsorbed onto each type of fibre. Paper sheets were then made with different amounts of added polyelectrolyte, and the structural and mechanical properties of the sheets were investigated, as well as the effect of an extra heating. The use of fibres with different kappa numbers led to different responses in terms of adsorption, and thus to differences in the mechanical properties of the resulting sheets. The tensile strength index was significantly increased (almost 50 % improvement in the best case) as a consequence of this polyelectrolyte adsorption onto the fibres, even at as low an adsorption level as 2 mg/g. The heating of paper sheets for 10 min at 160 °C was also shown to improve the tensile strength index by about 10 % for pulps with high kappa number.     

New insights into the mechanisms behind the strengthening of lignocellulosic fibrous networks with polyamines

Polyelectrolytes have been used extensively in the papermaking industry for various purposes. Although recent studies have shown that polyamines can be efficient dry-strength additives, the mechanism governing the strength enhancement of paper materials following the adsorption of polyamines onto pulp fibres is still not well understood. In this study, the effect of the adsorption of polyallylamine hydrochloride (PAH) onto the surface of unbleached kraft pulp fibres was investigated on both the fibre and the network scale. Isolated fibre crosses were mechanically tested to evaluate the impact of the chemical additive on the interfibre joint strength on the microscopic scale and the effect was compared with that previously observed on the paper sheet scale. X-ray microtomography was used to understand structural changes in the fibrous network following the adsorption of a polyamine such as PAH. Using image analysis methods, it was possible to determine the number of interfibre contacts (or joints) per unit length of fibre as well as the average interfibre joint contact area. The results showed that the median interfibre joint strength increased by 18 % upon adsorption of PAH. This can be achieved both by a larger molecular contact area in the contact zones and by a stronger molecular adhesion. The addition of the polymer also increased the number of efficient interfibre contacts per sheet volume. This combination of effects is the reason why polyamines such as PAH can increase the dry tensile strength of paper materials.     

Selective synthesis of the C3v isomer of C60h18

[chemical structure: see text]. C60H18 has been produced by hydrogenation of C60 at 100 bar H2 pressure and 673 K for 10 h. We have investigated the crude material without any purification by use of 1H NMR, 13C NMR, and IR spectroscopy and Fourier transform ion cyclotron resonance mass spectrometry. We show that the crude material consists of 95% of the C3v isomer of C60H18.     

Single-crystal structural study of the pressure-temperature-induced dimerization of C<Subscript>60</Subscript>

We present a study by Raman spectroscopy and X-ray diffraction/diffuse scattering of C₆₀ single-crystals treated at high-pressure and high-temperature. This allowed us to obtain structural information on the C₆₀ dimer state which can be considered as an intermediate state in the polymerization process. In the 1-6 GPa pressure range the crystals are primarily formed of dimers with additional minor fractions of monomers, 1D and 2D polymers, as shown by the analysis of the Raman spectra. The dimers are disordered within an average cubic lattice derived from that of the monomer. Single-crystal diffraction patterns reveal a characteristic diffuse scattering intensity distribution which has been simulated by calculating the diffuse scattering produced by dimer and trimer model structures. Satisfactory agreement is obtained for random positional and orientational disorder of the C₆₀-C₆₀ dimers although a small concentration of similarly disordered trimers is likely. In a first approximation the dimer/trimer disorder can be considered as random but various inter-dimer correlations are probably present, as discussed.Received: 3 October 2003, Published online: 19 February 2004PACS: 61.48. + c Fullerenes and fullerene-related materials - 61.43.Bn Structural modeling: serial-addition models, computer simulation - 78.30.Na Fullerenes and related materialsT. Wågberg: Present address: Groupe de Dynamique des Phases Condensées, Université Montpellier II, Place E. Bataillon, CC026, 34095 Montpellier, France     

Adsorption of polyallylamine to lignocellulosic fibres: effect of adsorption conditions on localisation of adsorbed polyelectrolyte and mechanical properties of resulting paper sheets

Cationic polyallylamine (PAH), was adsorbed onto lignocellulosic fibres, and a fluorescent label on the polyelectrolyte enabled its location to be shown by confocal fluorescence microscopy. The adsorption time and ionic strength were varied to study their effect on the localisation of the adsorbed PAH. The microscopy showed that a long adsorption time, 24 h, and a high ionic strength, 10⁻¹ M NaCl + 5 × 10⁻³ M NaHCO₃ or higher, resulted in the adsorption of polyallylamine throughout the fibre walls. Shorter adsorption times and/or lower ionic strength resulted in adsorption only to the fibre exterior. By preparing sheets from fibres with polyelectrolyte adsorbed either to the exterior parts or into the fibre cell wall and testing their mechanical behaviour, a link was established between the localisation of adsorbed polyelectrolyte and the mechanical properties. Adsorption to the fibre exterior led to an increase in tensile strength and strain at break. The creep deformation at 90%RH was also slightly reduced by the adsorption of low molecular weight PAH (15 kDa). When polyallylamine was adsorbed throughout the wall of the lignocellulosic fibres, the mechanical properties were not however improved and the creep deformation at 90%RH actually increased somewhat.