Influence of copper solute on the creep rate sensitivities of aluminium

The presence of copper atoms as continuous networks at the grain boundaries of an aluminium-copper alloy has been considered not preventing the moving of dislocations during creep (or at least partially). The dislocations can bs absorbed by these boundaries and penetrate through them. That leads to changés of shape and structure of grains and also to the sliding of grains against each other. This was deduced from the accelerating increase in the sensitivity of the steady state creep rate to the applied stress of an aluminium 2·8 wt% copper alloy examined at wide range of temperatures (50–350 °C) and applied stresses (7–170 MPa). This rapid increase in the sensitivity parameter of the steady state creep rate occurs in Al-Cu alloys at quite higher ranges of applied stresses and may be attributed mainly to the contribution of the grain boundary movements to the creep strain.     

Real Paley-Wiener theorems associated with the weinstein operator

In this paper we use real analysis techniques to establish a new real Paley-Wiener theorems for the Fourier-Bessel transform associated with the Weinstein operator. More precisely we characterize the C ^∞-functions whose image under the Fourier-Bessel transform are functions with compact support through an L ^p growth condition, p ∈ [1, +∞] and we give another version of the real Paley-Wiener theorem for L ²-functions.     

Dynamic response of permalloy/Cu/Co magnetoresistive sandwiches

The dynamic response of trilayer magnetoresistive permalloy/Cu/Co films was studied by high-frequency permeability spectra measurements. The resonance frequency is shown to depend on the interlayer copper thickness. This dependence is related to exchange coupling between permalloy and cobalt and the interaction field is estimated using the Landau–Lifschitz–Gilbert model.     

A Joint Integral Test for the Locations of Extrema for Brownian Motion

Let μ⁺(t) and μ⁻(t) be the locations of the maximum and minimum, respectively, of a standard Brownian motion in the interval [0,t]. We establish a joint integral test for the lower functions of μ⁺(t) and μ⁻(t), in the sense of Paul Lévy. In particular, it yields the law of the iterated logarithm for max(μ⁺(t),μ⁻(t)) as a straightforward consequence. Our result is in agreement with well-known theorems of Chung and Erdős [(1952) Trans. Amer. Math. Soc. 72, 179–186.], and Csáki, F?ldes and Révész [(1987) Prob. Theory Relat. Fields 76, 477–497].      

Combinatorial Optimization by Dynamic Contraction

A heuristic optimization methodology, Dynamic Contraction (DC), is introduced as an approach for solving a wide variety of hard combinatorial problems. Contraction is an operation that maps an instance of a problem to a smaller instance of the same problem. DC is an iterative improvement strategy that relies on contraction as a mechanism for escaping local minima. As a byproduct of contraction, efficiency is improved due to a reduction of problem size. Effectiveness of DC is shown through simple applications to two classical combinatorial problems: The graph bisection problem and the traveling salesman problem.     

Lie-group method solution for two-dimensional viscous flow between slowly expanding or contracting walls with weak permeability

The non-linear equations of motion describing the laminar, isothermal and incompressible flow in a rectangular domain bounded by two weakly permeable, moving porous walls, which enable the fluid to enter or exit during successive expansions or contractions, are considered. We apply Lie-group method for determining symmetry reductions of partial differential equations. Lie-group method starts out with a general infinitesimal group of transformations under which given partial differential equations are invariant, then, the determining equations are derived. The determining equations are a set of linear differential equations, the solution of which gives the infinitesimals of the dependent and independent variables. After the group has been determined, a solution to the given partial differential equation may be found from the invariant surface condition such that its solution leads to similarity variables that reduce the number of independent variables in the system. Effect of the permeation Reynolds number R_e and the dimensionless wall dilation rate α on self-axial velocity have been studied both analytically and numerically and the results are plotted.     

Synthesis and Reactions of 5-Amino-3-(3-methyl-5-oxo-1-phenyl-2-pyrazolin-4-yl)-7-phenyl-7 H -thiazolo[3,2- a ]pyrimidine-6-carbonitrile

5-Amino-3-(3-methyl-5-oxo-1-phenyl-2-pyrazolin-4-yl)-7-phenyl-7H-thiazolo[3,2-a]pyrimidine-6-carbonitrile was synthesized via the reaction of 4-(2-aminothiazol-4-yl)-3-methyl-1-phenyl-2-pyrazolin-5-one with benzylidene malononitrile and was then transformed to related fused heterocyclic systems. The antifungal and antibacterial studies revealed in some cases excellent biocidal properties.     

Amperometric monitoring of lactate accumulation in rabbit ischemic myocardium

Fabrication and characterization of miniature, flexible, planar biosensors for monitoring l-lactate accumulation in an ischemic myocardium are described. Three configurations of Au-based electrodes were fabricated by a photolithographic technique on flexible polyimide Kapton((R)) foil. All sensors are based on an immobilized lactate oxidase with amperometric detection of the enzymatically produced hydrogen peroxide at a platinum-electroplated-gold base electrode polarized at 0.5 V versus Ag/AgCl. An inner electropolymeric layer is used to prevent electrode fouling and to reject the interference effects of easily oxidizable molecules. In addition, a diffusion controlling outer layer that greatly enhances the linear dynamic range of the sensor, is obtained by casting a polyurethane external film. The developed sensor was evaluated in vitro and proved to have high selectivity, good operational stability, good accuracy and precision (average recovery = 102.3 +/- 0.4% for control sera), fast response time (t(95) = 20 s) and high upper limit of the linear dynamic range (25-80 mM, with sensitivity of 1.7-0.4 nA mM(-1) respectively at PO(2) = 15 mmHg). Subsequently, the sensor was brought into direct contact with the surface of the rabbit papillary muscle and used for continuous quantitative monitoring of extracellular lactate accumulation during no-flow ischemia.     

Effects of Added Surfactant on the Dynamic Interfacial Tension Behavior of Acidic Oil/Alkaline Systems

The effects of a ready-made surfactant (sodium dodecyl sulfate) on the dynamic interfacial tension between a model acidic oil (linoleic acid dissolved in paraffin oil) and various aqueous alkaline (NaOH) systems have been studied using pendant drop tensiometry at surfactant concentrations both below and above the critical micelle concentration (CMC). Below the CMC the added surfactant contributes significantly to a further reduction of interfacial tension of the reacting acid/alkaline system, whereas above the CMC the added surfactant plays an important role in damping the dynamic trends observed for the reactive system alone. Copyright 2001 Academic Press.