Synthesis and mesomorphic behaviour of comb-like polymers based on lipopeptides with two hydrophobic chains

Polymerizable lipopeptides with two hydrophobic chains were synthesized and transformed into comb-like polymers by radical polymerization. The structure of dry polymerizable lipopeptides and comb-like polymers and of their aqueous solutions was determined by X-ray diffraction. Comb-like polymers exhibit both thermotropic and lyotropic properties. Three types of mesomorphic structure were resolved: smectic B, smectic A and cylindrical hexagonal. The domains of stability of the mesophases and the values of their structural parameters were established.     

Selective Oxidation of Isobutene over CsFeCoBiMnMoOx Mixed Oxide Catalyst

Mixed oxide catalyst Cs0.1Fe2Co6BiMnMo12Ox was prepared by the coprecipitation method.Selective oxidation of isobutene was carried out in a fixed-bed reactor over Cs0.1Fe2Co6BiMnMo12Ox.The results showed that the catalyst had high catalytic activity. Under the optimum reaction conditions(n(i-C4):n(O2)=1:2-1:4, space velocity=180 h^-1, T=360℃), the yields of methacrolein and methacrylic acid can reach 80% and 8%, respectively. The total yield of liquid products (methacrolein, methacrylic acid and acetic acid) can reach about 90%.     

变频控制直接膨胀式太阳能热泵的数值模拟

文中通过对变频控制直接膨胀式太阳能热泵的数值模拟,指出PV/T- SAHP系统实现变频控制从而解决太阳能热泵集热器面积与压缩机的容量不匹配的关键问题是找到系统集热/蒸发器的MSS线.为变工况下太阳能热泵系统的研究提供参考.     

Development of an LC/MS/MS method in order to determine arctigenin in rat plasma: its application to a pharmacokinetic study

In this study, a simple and sensitive LC/MS/MS method was developed and validated for the determination of arctigenin in rat plasma. The MS detection was performed using multiple reaction monitoring at the transitions of m/z 373.2 → 137.3 for arctigenin and m/z 187.1 → 131.0 for psoralen (internal standard) with a Turbo IonSpray electrospray in positive mode. The calibration curves fitted a good linear relationship over the concentration range of 0.2–500 ng/mL. It was found that arctigenin is not stable enough at both room temperature and ?80 °C unless mixed with methanol before storage. The validated LC/MS/MS method was successfully applied for the pharmacokinetic study of arctigenin in rats. After intravenous injection of 0.3 mg/kg arctigenin injection to rats, the maximum concentration, half‐life and area under the concentration–time curve were 323 ± 65.2 ng/mL, 0.830 ± 0.166 and 81.0 ± 22.1 h ng/mL, respectively. Copyright © 2013 John Wiley & Sons, Ltd.     

小型撬装式BOG再液化装置的研发及性能测试

以最新研制的大功率回热式脉管制冷机为核心,建立了一台小型撬装式BOG(Boiled off Gas)再液化实验装置。与传统的BOG再液化装置相比,该装置具有结构紧凑、操作简单、经济效益好等优点。通过测试实验,0.4MPa时,在9400W的电机功率下,该装置制冷功率达到267W@86K;对制冷机冷头和冷屏进行改进后,在8450W的电机功率下,该装置在0.3MPa时的制冷功率达到430W@83K。实验结果表明:对制冷机冷头和冷屏进行优化后,装置的有效制冷功率大幅提高。     

Ni/SAPO-11催化剂上棕榈油加氢脱氧制异构烃燃料(英)

采用水热法合成了小粒径、具有介孔结构的SAPO-11分子筛.采用浸渍法制备了不同Ni负载量的Ni/SAPO-11催化剂.并采用X射线衍射,扫描电镜,N₂物理吸附-脱附,NH₃程序升温脱附,热重和H₂化学吸附技术对该类催化剂的物理化学性质进行了详细表征.结果表明,SAPO-11较大表面积和介孔结构可分散Ni,使得Ni粒子尺寸较小.在棕榈油加氢脱氧制备液体烃类燃料反应中,液体烷烃产物由相关脂肪酸中间产物的直接加氢脱氧和脱羰-加氢脱氧两种途径产生.Ni/SAPO-11催化剂的弱/中强酸性质及其匹配的金属-酸双功能可显著抑制积炭反应,提高催化剂的寿命,液体烷烃收率高达70%,异构烷烃选择性超过80%.     

Statistical method for resolving the photon–photoelectron-counting inversion problem

A statistical inversion method is proposed for the photon–photoelectron-counting statistics in quantum key distribution experiment. With the statistical viewpoint, this problem is equivalent to the parameter estimation for an infinite binomial mixture model. The coarse-graining idea and Bayesian methods are applied to deal with this ill-posed problem, which is a good simple example to show the successful application of the statistical methods to the inverse problem. Numerical results show the applicability of the proposed strategy. The coarse-graining idea for the infinite mixture models should be general to be used in the future.     

Recovery of spectral features readout with frequency-chirped laser fields

A data-processing technique is proposed for use with conventional frequency-chirped absorption spectroscopy to ensure accurate mapping of spectral features into time-domain signatures with arbitrarily fast readout chirp rates. This technique recovers the spectrum from a signal that is distorted owing to the fast chirp rate and therefore facilitates fast measurement of the spectral features over a broad spectral range with high resolution. Both numerical simulations and experimental results are presented.     

Gap Space Optimization for NO Removal in a Non‐thermal Plasma Discharge

Given the operational constraints of aerospace ground equipments (AGE), the nonthermal plasma discharge (NTPD) has been identified as a promising technology for their NO_x removal. As part of a program to optimize an NTPD system for this particular application, an investigation of the effect of discharge gap spacing on the electrical and chemical processes that occur in NTPDs was initiated. A number of experiments were performed to examine how the gap spacing affects the NO removal efficiency, discharge characteristics, and chemical reactions in a NTPD device. Gap spacings ranging from 0.8 to 4.0 mm were investigated in this study. An optimum gap spacing for NO removal was observed at approximately 2 mm and, based on the experimental data, a physical explanation for the optimum was developed. The experiments, results and conclusions are discusssed in detail in this paper.     

Minimizing multi-homogeneous Bézout numbers by a local search method

Consider the multi-homogeneous homotopy continuation method for solving a system of polynomial equations. For any partition of variables, the multi-homogeneous Bézout number bounds the number of isolated solution curves one has to follow in the method. This paper presents a local search method for finding a partition of variables with minimal multi-homogeneous Bézout number. As with any other local search method, it may give a local minimum rather than the minimum over all possible homogenizations. Numerical examples show the efficiency of this local search method.