细胞色素C的电化学行为研究

本文评述了细胞色素Ｃ电化学研究的发展概况，重点介绍了细胞色素Ｃ在促进剂作用下的电化学行为，促进剂种类，影响促进作用的因素及促进机理。     

计算机Monte Carlo法模拟自由基交联共聚网络结构的增长

本文成功地用MonteCarlo方法模拟了以画面方式表示的苯乙烯-二乙烯苯交联共聚反应中大分子链增长、支化及交联的进化情况，并给出了相应的转化率，以定量模型的方式描述了该类反应。     

以多聚甲醛为还原剂制备新型阳极Pt/CMK-3催化剂

 以多聚甲醛为还原剂,采用液相还原法制备了Pt/CMK-3直接甲醇燃料电池(DMFC)阳极催化剂,并采用透射电镜和X射线衍射技术对其进行了表征. 结果表明,有序介孔碳CMK-3具有规整的二维有序孔道结构,为DMFC中电子和燃料的传输提供了方便的路径,同时它较大的比表面积使得Pt纳米粒子很好地分散在其表面; Pt/CMK-3催化剂中Pt粒子的平均粒径为2.8 nm, 小于E-TEK公司的商品化Pt/XC-72和以甲醇为还原剂制备的Pt/C-M催化剂,并且粒径分布范围窄,结晶度低. 察了Pt/CMK-3催化剂对甲醇的电催化氧化性能,发现Pt/CMK-3催化剂对甲醇氧化的电催化性能优于Pt/XC-72和Pt/C-M催化剂.     

直接甲醇燃料电池阴极电催化剂的研究进展

直接甲醇燃料电池(DMFC)功率密度高，燃料甲醇价格低廉、储存和携带方便，特别适合作为电动车和小型电子设备的电源，是目前燃料电池研究领域的一个热点。本文介绍了40年来DMFC阴极电催化剂的发展历史及现状，并针对目前严重影响DMFC性能的“甲醇透过”问题，阐述了研制耐甲醇阴极电催化剂的重要性，讨论了今后DMFC阴极电催化剂的发展趋势。     

用亚硝基R盐螯合树脂分离富集催化极谱法测定矿石中的铱

本文研究了利用亚硝基Ｒ盐螯合形成的树脂，分离富集试液中痕量贵金属元素铱的实验条件。并利用ＪＰ－１型示波极谱仪，在１．５０ｍｏｌ／Ｌ盐酸＋５．０×１０＾－５ｍｏｌ／Ｌ硫脲＋０．２ｍｏｌ／Ｌ盐酸＋５．０×１０＾－５ｍｏｌ／Ｌ硫脲＋０．２ｍｏｌ／Ｌ碘化钾＋碲（ρ（Ｂ）＝０．４ｍｇ／Ｌ）的混合底液中，对铱进行极谱催化波测定。在示波极谱仪上峰电位约－０．５５Ｖ（银汞齐为参比电极），可测定试液中５．０×１．０     

Simple and controllable synthesis of highly dispersed Pt-Ru/C catalysts by a two-step spray pyrolysis process

A carbon supported Pt-Ru catalyst with uniform distribution and small average size of the Pt-Ru particles was synthesized using a two-step spray pyrolysis (SP) method; the electrocatalytic activity of the prepared catalyst for methanol oxidation is better than that of the standard commercial catalyst.     

Synthesis and characterization of poly(ethylene oxide-co-ethylene sulfone)s and their precursors: Poly(ethylene oxide-co-ethylene sulfide)s

Three poly(ethylene oxide-co-ethylene sulfide)s with oxygen to sulfur ratios of 2/1, 2/2, and 1/2 were prepared by phase-transfer catalyzed polycondensations of (1) sodium sulfide and 1,2-bis (2-chloroethoxy)ethane, (2) 1,2-ethanedithiol and 1,2-bis(2-chloroethoxy)ethane, and (3) 1,2-ethanedithiol and 2-chloroethyl ether, respectively. A buffered solution with pH between the pK_a of the monothiol (RSH) and the pK_a2 of the dithiol (HS–R–SH), or H₂S, was needed to obtain high molecular weight polymers, which suggests that nucleophiles transfer and react as monoanions rather than dianions. These poly(ethylene oxide-co-ethylene sulfide)s were oxidized completely to poly(ethylene oxide-co-ethylene sulfone)s using 3-chloroperoxybenzoic acid as oxidant. Both the final polymers and the precursors have regular sequenced structures and are semicrystalline. As expected, their glass transition temperatures and melting points increase and solubilities decrease with the decrease of ether oxygen to sulfur ratio. © 1994 John Wiley & Sons, Inc.     

Hydrogen‐Bonded Films for Zero‐Order Release of Leuprolide

Leuprolide has been widely used in androgen deprivation therapy for the treatment of advanced prostate cancer, but its use is still limited due to its short half‐life. Herein, hydrogen‐bonded layer‐by‐layer films are fabricated from PEGylated leuprolide (PEG‐LEU) and tannic acid (TA). Because of its dynamic nature, the film disintegrates gradually in water and releases PEG‐LEU and TA. The in vitro release profile indicated perfect zero‐order kinetics, which is explained by the unique release mechanism. When implanted subcutaneously in male rats, the films maintain a constant serum drug level. For a 60‐bilayer film, the serum drug level is maintained constant for ≈24 days. No initial burst release is observed, suggesting that the in vivo release also follows zero‐order kinetics. Initially, an increase in the level of serum testosterone is induced by the released drug, followed by testosterone suppression to a constant level below the castrate level, which could be maintained as long as a constant serum drug level is maintained. Since the new drug carriers avoid an initial burst release of the drug and maintain a constant serum drug level and hence a constant serum testosterone level below the castrate level, these carriers are highly promising for androgen deprivation therapy.