Nonlinear frequency response analysis: a recent review and perspectives

The nonlinear frequency response analysis (NFRA) can be seen as an extension of electrochemical impedance spectroscopy. NFRA gives a full and detailed representation of the system response and can establish a connection between model parameters and the experimentally observed phenomena. In this article, different theoretical NFRA approaches and the most recent application examples are discussed. A simple electrochemical example is used to showcase the benefits and disadvantages of analyzing the system response by using different approaches. In addition, it was shown how to extract experimental harmonic values and analyze them.     

Wavelength and power monitoring of DWDM systems using scanning F–P filter calibrated with a F–P laser

A novel technique to overcome the long-term drift and hysteresis of a scanning Fabry–Perot filter was developed and applied to wavelength and power monitoring of DWDM system. By using the comb peaks generated by a temperature-stabilized, near threshold-biased Fabry–Perot diode laser as wavelength reference for the scanning Fabry–Perot filter, wavelength and power measurement accuracy of better than ±10 pm and 0.2 dB, respectively, were achieved.     

用于机械振动实时监测的光纤光栅有源传感装置

把一对中心反射波长分别为1562.11nm和1562.71nm的光纤光栅粘贴在均质、等厚、等腰三角形悬臂梁上下表面作为环形腔光纤激光器端镜，当机械振动激励自由端时，通过观测激光输出脉冲，地施加于自由端的机械振动的频率进行了实时监测；观察两光栅波长漂移量差值的变化，可在0～6.1mm的范围内判断所测振动的振幅。低于100Hz时，实验结果与实际值基本吻合。     

Roles of rhenium diimine complexes as metal‐ion probes and photosensitizers in functional polyurethanes

Polyurethanes incorporated with rhenium diimine complexes were synthesized. The polymers exhibited interesting morphologies and solution properties. Results from gel permeation chromatography suggested the formation of polymer aggregates in solutions. The polymers could act as probes for metal ions. The addition of metal ions to polymer solutions led to significant changes in the electronic absorption properties of the polymer solutions. This was attributed to the interactions between the polyether moieties and metal ions. The metal complexes could also act as efficient photosensitizers. After doping with charge‐transport viologens, the photoconductivity of the polymers was greatly enhanced. The experimental quantum efficiency was simulated with Onsager's theory. The thermalization distances and the primary yields were typically 12–14 Å and 10^?3, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1708–1715, 2003     

Moments of an exponential functional of random walks and permutations with given descent sets

The exponential functional of simple, symmetric random walks with negative drift is an infinite polynomial Y = 1 + ξ₁ + ξ₁ξ₂ + ξ₁ξ₂ξ₃ + ⋯ of independent and identically distributed non-negative random variables. It has moments that are rational functions of the variables μ _k = E(ξ ^k ) < 1 with universal coefficients. It turns out that such a coefficient is equal to the number of permutations with descent set defined by the multiindex of the coefficient. A recursion enumerates all numbers of permutations with given descent sets in the form of a Pascal-type triangle. This revised version was published online in August 2006 with corrections to the Cover Date.     

Controlled/living polymerization of 2‐(diethylamino)ethyl methacrylate and its block copolymer with tert‐butyl methacrylate by atom transfer radical polymerization

Polymerization of 2‐(diethylamino)ethyl methacrylate (DEAEMA) via homogeneous atom transfer radical polymerization under various reaction conditions is described. The effects of the initiators and solvents were examined. With 1,1,4,7,10,10‐hexamethyl triethylenetetramine/copper(I) chloride/p‐toluenesulfonyl chloride as the ligand/catalyst/initiator system in methanol, poly(DEAEMA) with a polydispersity index as low as 1.07 was synthesized. Kinetic studies demonstrated the polymerization was very well controlled and exhibited the living characteristic of the process. Well‐defined block copolymers of DEAEMA and tert‐butyl methacrylate (tBMA) were successfully synthesized. The copolymers could be synthesized with equally good results by starting with either p(DEAEMA) or p(tBMA) as the macroinitiators. However, only the macroinitiators terminated with chlorine should be used. The corresponding macroinitiators with bromine as a transferable group did not yield well‐defined copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2688–2695, 2003     

A Multidimensional Branch-and-Prune Method for Interval Global Optimization

In this paper a new multidimensional extension of the recently developed one-dimensional enclosure method called kite is given for interval global optimization. A more sophisticated version of the pruning technique based on the kite method is introduced. By the new componentwise approach all the one-dimensional theoretical results and procedures can be used in the higher-dimensional case. The possibilities in the implementation of the new algorithm together with numerical results on 40 standard test problems are presented.     

Continuity of the Solution Map in Parametric Affine Variational Inequalities

A systematic study of the upper semicontinuity and the lower semicontinuity of the solution map in parametric affine variational inequalities is given in this paper. Several examples are constructed to analyze the results. This work was supported by Korea Research Foundation Grant (KRF 2001-015-DP0049), the APEC Postdoctoral Fellowships Program, and the KOSEF Brain Pool Program.     

Traveling Wave Solutions for a Combustion Problem

A simple model for combustion consisting of two parabolic equations is considered. It is shown that plane wave solutions exist. Certain invariant integrals are obtained, from which a nonexistence criterion is derived. The effect of the wave speed on the shape of the wave is deduced.     

Limits of parallelism in explicit ODE methods

Numerical methods for ordinary initial value problems that do not depend on special properties of the system are usually found in the class of linear multistage multivalue methods, first formulated by J.C. Butcher. Among these the explicit methods are easiest to implement. For these reasons there has been considerable research activity devoted to generating methods of this class which utilize independent function evaluations that can be performed in parallel. Each such group of concurrent function evaluations can be regarded as a stage of the method. However, it turns out that parallelism affords only limited opportunity for reducing the computing time with such methods. This is most evident for the simple linear homogeneous constant-coefficient test problem, whose solution is essentially a matter of approximating the exponential by an algebraic function. For a given number of stages and a given number of saved values, parallelism offers a somewhat enlarged set of algebraic functions from which to choose. However, there is absolutely no benefit in having the degree of parallelism (number of processors) exceed the number of saved values of the method. Thus, in particular, parallel one-step methods offer no speedup over serial one-step methods for the standard linear test problem. Although the implication of this result for general nonlinear problems is unclear, there are indications that dramatic speedups are not possible in general. Also given are some results relevant to the construction of methods.Work supported in part by National Science Foundation grants DMS 89 11410 and DMS 90 15533 and by US Department of Energy grant DOE DEFG02-87ER25026. Work of the second author was completed while at the University of Illinois.