Tetrafunctional initiators for cationic polymerization of olefins

3,3′,5,5′‐Tetrakis(2‐chloro‐2‐propyl)biphenyl (biphenyl tetracumyl chloride, BPTCC) and 1,3‐bis[3,5‐bis(2‐chloro‐2‐propyl)phenoxy]propane (diphenoxypropane tetracumyl chloride, DPPTCC) were synthesized as initiators for quasiliving cationic polymerization of isobutylene (IB). In the synthesis of BPTCC, tetrafunctionality was achieved via the coupling of dimethyl 5‐bromoisophthalate (DMBI) using nickel dibromide bis(triphenylphosphine) and zinc in the presence of a base; in the synthesis of DPPTCC, two equivalents of dimethyl 5‐hydroxyisophthalate were linked via reaction with 1,3‐dibromopropane in the presence of potassium carbonate. Both initiators were used to initiate the polymerization of IB under quasiliving cationic polymerization conditions. PIB initiated from BPTCC revealed a chain end/molecule value (as determined by ¹H‐NMR) of 3.85, verifying the nearly exclusive production of 4‐arm polyisobutylene (PIB). GPC analysis revealed a narrow peak representing the target four‐arm PIB, with a slight shoulder at high elution volumes (low molecular weights). GPC analysis of the PIB initiated by DPPTCC revealed multimodal distributions, suggesting the formation of two‐, three‐, and four‐arm star polymers during the polymerization. This behavior was attributed to Friedel–Crafts alkylation of the initiator core after the addition of one IB unit, which was activated by the electron‐donating oxytrimethyleneoxy linking moiety. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5942–5953, 2004     

Overview: The Potential of silanes for chromate replacement in metal finishing industries

Trialkoxysilanes (or silanes) have emerged as a very promising alternative for chromates in metal finishing industries. Compared to the conventional chromating processes, the major merits of silane-based surface treatments include: eco-compliance, easy-control processing, comparable corrosion protection of metals as well as paint adhesion to a variety of topcoats. In this overview paper, we report the recent status of silane studies including results of corrosion performance tests, the mechanism of corrosion protection of metals by silanes and the themal stabilities of silane films. We also address the new fields that we are beginning to explore such as nano-structured silane films, “self-healing” silane films, and “super-primers”.     

Thermal decomposition products of copoly(arylene ether sulfone)s characterized by direct pyrolysis mass spectrometry

Pyrolysis products with mass of up to 850 Da were detected by direct pyrolysis mass spectrometric (DPMS) analysis of a series of copoly(arylene ether sulfone)s (PES-PPO) synthesized by nucleophilic condensation of either 4,4′-dichlorodiphenylsulfone (CDPS) or 4,4′-bis-(4-chlorophenyl sulfonyl) biphenyl (long chain dichloride, LCDC) with different molar ratios of hydroquinone (HQ) or dihydroxydiphenylsulfone (HDPS). Pyrolysis products retaining the repeating units of the initial copolymers were formed at temperatures ranging from 420 °C to 470 °C (near the initial decomposition temperature). At temperatures higher than 450 °C were observed products containing biphenyl units, formed by the elimination process of SO₂ from diphenyl sulfone bridges. Products having biphenyl and dibenzofuran moieties were detected in the mass spectra recorded at temperatures above 550 °C. These units were formed by loss of hydrogen atom from diphenyl ether bridges. Although the EI (18 eV) mass spectra of the pyrolysis products of the samples investigated were very similar, it was found that the relative intensity of some ions reflects the molar composition of the copolymers analysed. Cyclic and linear oligomers with very low molecular mass, present in the crude copolymers, were also detected by DPMS. Thermogravimetric analysis also showed their excellent thermal stability below 400 °C. It indicates that the copolymers yield a char residue of 40-45% at 800 °C, which increases with the PPO mole fraction in the samples.     

Structural basis for thrombin activation of a protease-activated receptor: inhibition of intramolecular liganding

Protease-activated G protein-coupled receptors (PAR1-4) are tethered-ligand receptors that are activated by proteolytic cleavage of the extracellular domain (exodomain) of the receptor. PAR1, the prototypic member of the PAR family, is the high-affinity thrombin receptor of platelets and vascular endothelium and plays a critical role in blood coagulation, thrombosis, and inflammation. Here, we describe the solution structure of the thrombin-cleaved exodomain of PAR1. The side chains of a hydrophobic hirudin-like (Hir) sequence and adjacent anionic motif project into solution. Docking of the exodomain Hir sequence to exosite I of thrombin reveals that the tethered ligand in the cleaved exodomain bends away from thrombin, leaving its active site available to another large macromolecular substrate. The N-terminal ligand is longer than anticipated and forms an intramolecular complex with a region located in the C terminus of the exodomain. Mutational analysis confirmed that this C-terminal region is a ligand binding site for both intra- and intermolecular ligands. A lipidated-ligand binding site peptide was found to be an effective inhibitor of thrombin-induced platelet aggregation.     

Identification and mass spectrometric characterization of glycosylated flavonoids in Triticum durum plants by high-performance liquid chromatography with tandem mass spectrometry

A mass spectrometric method for extensive detection and semi-quantitative determination of flavonoid glycosides in stem and leaves of young Triticum durum plants is presented. About 100 g of sample were lyophilized and ground, and the compounds of interest were then extracted, cleaned-up, and fractionated using high-performance liquid chromatography (HPLC). Tandem mass spectrometry analyses were performed using a quadrupole-linear ion trap instrument with an information-dependent data acquisition (IDA) protocol that looped two experiments, enhanced MS scan and enhanced product ion scan. Various glycoconjugates, which are all derivatives of only four flavones, apigenin, luteolin, chrysoeriol and tricin, were identified and belong to the following categories: 7 monoglycosides, 31 diglycosides, 15 triglycosides and 1 tetraglycoside. Among these some acylated glycosides were found. Tricin derivatives are present exclusively as O-glycosides, while apigenin and luteolin are present always as C-glycosides. Semi-quantitative estimation was performed by using the monoglycoside and diglycoside of quercetin as internal standards.     

Assay for urinary estriol during the menstrual cycle based on extraction by a graphitized carbon black cartridge followed by high-performance liquid chromatography

Summary A high-performance liquid chromatography (HPLC) assay for estriol in nonpregnancy urine is described. After Enzymic hydrolysis, the estriol is extracted from urine by the sorbent trap technique utilizing graphitized carbon black (Carbopack B). After some washing steps, estriol is desorbed by a suitable solvent system. After solvent removal, the sample is injected into an HPLC column for estriol quantification. Analytical recovery of estriol was 96.1%. The precision of the method was 2.6 and 4.9% respectively at 145 and 10.6ng/ml of urine. The limit of sensitivity was set at 0.8 ng/ml of urine. The mean contents of estriol in the follicular and luteal phases were respectively 11.3 and 38.8 ng/ml of urine.Dedicated to Prof. Dr. A. Liberti on the occasion of his 70th birthday.     

Effect of adding new phosphazene compounds to poly(butylene terephthalate)/polyamide blends. II: Effect of different polyamides on the properties of extruded samples

Poly(butylene terephthalate) (PBT) and a sample of polyamide have been melt processed in the presence of two new phosphazene compounds, namely 2,2-dichloro-4,4,6,6-bis[spyro(2′,2″-dioxy-1′,1″-biphenyl)]cyclotriphosphazene (2Cl-CP) and 2,2-bis(2-methoxy-4-methyleneoxy-phenoxy)-4,4,6,6-bis[spyro(2′,2″-dioxy-1′,1″-biphenyl)]cyclophosphazene (CP-2EPOX).The blends were prepared by using polyamide 6 (PA6) and polyamide 6,6 (PA66) in 25/75 and 75/25 w/w compositions by using a co-rotating twin-screw extruder.The materials have been completely characterized from a mechanical, rheological, and morphological point of view. The results indicate that the additives used cause an increase of the rupture properties and of the viscosity, especially in the PA6 rich blends containing CP-2EPOX. This result can be not only attributed to a chain extension effect on the PA phase but also to in situ formation of PA/PBT copolymers promoted by the presence of the CP compound as confirmed by NMR and MALDI-TOF analyses. The compatibilization effect fades in blends containing PA66, probably due to a thermal deactivation of the additives at higher temperature required to process this polymer.     

Exchange reactions occurring through active chain ends: Melt mixing of nylon 6 and polycarbonate

The chemical reactions occurring in the melt mixing of nylon6/polycarbonate (Ny6/PC) at 240°C were investigated. The reaction of equimolar Ny6/PC blends can be reconciled within the overall scheme of an exchange reaction occurring with the attack of active amino terminals on the inner carbonate groups. We have performed the synthesis of low molecular weight amino-terminated nylon 6 and the effect of the active amino terminal groups on the exchange kinetics was investigated. The exchange reaction yields sizeable amounts of copolymer, in fact after 75 min of melt mixing the (initially equimolar) blend contains 30 mol of unreacted PC and 70 mol of Ny6/PC copolymer (all the Ny6 was therefore incorporated in the copolymer). Trifluoroacetylation of nylon 6 was used to produce CHCl₃-soluble Ny6/PC copolymers, that could be analyzed by NMR. The NMR analysis yielded, beside the copolymer composition, evidence of the presence of urethane units interconnecting the Ny6 and PC blocks. The amount of urethane units increased with the reaction time, indicating a reduction of the block size as a function of the extent of exchange. Our study established the structure of the products formed, provided the materials balance of the process, and investigated some salient kinetic aspects. A thermal degradation study was also performed by thermogravimetry and direct pyrolysis mass spectrometry, to identify the products formed in the thermal treatment of the blends and to investigate the possible role of the inner amide groups in the intermolecular exchange reactions occurring between Ny6 and PC. Our results prove that these reactions occur above 300°C, and that only the cleavage of carbonate groups, by means of Ny6 amino end groups, is actually occurring at 240°C. © 1994 John Wiley & Sons, Inc.     

Liquid chromatography–mass spectrometry applications for quantification of endogenous sex hormones

Liquid chromatography, coupled with tandem mass spectrometry, presents a powerful tool for the quantification of the sex steroid hormones 17‐β estradiol, progesterone and testosterone from biological matrices. The importance of accurate quantification with these hormones, even at endogenous levels, has evolved with our understanding of the role these regulators play in human development, fertility and disease risk and manifestation. Routine monitoring of these analytes can be accomplished by immunoassay techniques, which face limitations on specificity and sensitivity, or using gas chromatography–mass spectrometry. LC–MS/MS is growing in capability and acceptance for clinically relevant quantification of sex steroid hormones in biological matrices and is able to overcome many of the limitations of immunoassays. Analyte specificity has improved through the use of novel derivatizing agents, and sensitivity has been refined through the use of high‐resolution chromatography and mass spectrometric technology. This review highlights these innovations, among others, in LC–MS/MS steroid hormone analysis captured in the literature over the last decade.