Flow and Sequential Injection Manifolds for the Spectrophotometric Determination of Captopril Based on its Oxidation by Fe(III)

 Two new simple and rapid methods are reported for the accurate and precise spectrophotometric determination of captopril (CPL) using flow (FI) and sequential injection (SI) analysis. The methods are based on the fast oxidation of CPL by Fe(III). The produced Fe(II) reacts with 2,2′-dipyridyl-2-pyridylhydrazone (DPPH) in acidic medium to form a colored complex which is monitored spectrophotometrically at 535 nm. Both methods allow the determination of the analyte up to 1000 mg L⁻¹ at a sampling rate of 120 and 60 injections per hour for FI and SI, respectively. The methods are very precise [s _r=0.8 and 1.2% at 500 mg L⁻¹ CPL (n=12) for FI and SI, respectively] and the 3σ detection limits (c _L=4.0 and 7.0 mg L¹, respectively) are quite satisfactory. Their application to a variety of anti-hypertensive commercial pharmaceutical formulations showed excellent results (relative errors, e _r, < ± 1.6% in all cases compared to an official HPLC method), while common pharmaceutical excipients were found not to interfere. Recovery experiments further verified the accuracy of the developed methods, as the percent recoveries were in the range of 98.1–102.5%. Author for correspondence. E-mail: themelis@chem.auth.gr Received May 9, 2002; accepted January 8, 2003 Published online May 5, 2003     

Kinetics and mechanism of the Co(II)-assisted oxidation of thioureas by dioxygen

Catalytic oxidation of N,N'-dimethylthiourea and thiourea by dioxygen in water using a new cobalt(II) complex of octasulfophenyltetrapyrazinoporphyrazine was performed under mild conditions. The reaction is shown to include the formation of an intermediate anionic five-coordinate complex followed by an unusual two-electron oxidation to produce the corresponding urea and elemental sulfur (S8). Kinetic and thermodynamic parameters for the different reaction steps of the process were determined. Drastic differences in catalytic activity of cobalt and iron octasulfophenyltetrapyrazinoporphyrazines were observed.     

Preparation of a molecularly imprinted polymer for the solid-phase extraction of scopolamine with hyoscyamine as a dummy template molecule

Molecularly imprinted polymers (MIPs) selective for scopolamine were produced using hyoscyamine (a close structural analogue) as template molecule. The produced polymers were used as media for solid-phase extraction, exhibiting selective binding properties for the analyte from biological samples. Human and calf urine and serum were processed on the MIP under various extraction protocols. The best performance was observed after loading the analyte in aqueous environment facilitating retention on the MIP by non-selective hydrophobic interactions. The MIPs were subsequently washed using an optimised solvent system to enable selective desorption of the analyte. Other related and non-related compounds were accessed to evaluate molecular recognition properties. Recoveries of up to 79% were achieved for the analyte of interest from biological samples.     

A study of the behaviour of some new column materials in the chromatographic analysis of Cinchona alkaloids

Summary A major problem in the HPLC analysis of alkaloids is the poor peak shape and consequently low resolution, due to the interactions of the basic alkaloids with the residual acidic silanol groups of most reversed phase materials. The performance of new packing materials specially designed for the separation of basic compounds has been studied using mobile phases without the special additives commonly applied in the analysis of alkaloids. Strongly basic Cinchona alkaloids were used as test compounds. Retention characteristics and selectivities of each material were studied, after mobile phase optimisation for the column. The influence of the major factors (nature and content of the organic modifier, pH value, salt concentration) affecting resolution was studied. The mobile phases were chosen so that they could be used in thermospray LC-MS. The addition of salts to the mobile phase improves separation but in general the modification of the mobile phase gave little change in selectivity. The performance of silicabased C₁₈ material proved superior to the polymer materials tested.     

Immunoaffinity chromatography for the sample pretreatment of Taxus plant and cell extracts prior to analysis of taxanes by high-performance liquid chromatography

The application of immunoaffinity chromatography for the purification of Taxus plant and cell extracts prior to the HPLC analysis is described. Polyclonal antibodies raised against 10-deacetylbaccatin III (10-DAB III), paclitaxel's main precursor in plant, were characterised by enzymed-linked immunosorbent assay. Immunoglobulins from selected antisera were immobilised on CNBr-activated Sepharose 4B. The immunoaffinity column was used for the purification of plant and plant cell culture extracts prior to their analysis by HPLC. Immunoaffinity chromatography enabled the selective concentration of taxoids and enhanced sample clean-up.     

Profiling and biomarker identification in plasma from different Zucker rat strains via high mass accuracy multistage mass spectrometric analysis using liquid chromatography/mass spectrometry with a quadrupole ion trap-time of flight mass spectrometer

High mass accuracy electrospray ionisation multistage tandem mass spectrometry (MS(n)) was applied to metabolite profiling studies on plasma samples derived from two strains of rat (the Zucker (fa/fa) obese strain and the normal wild type). Using a quadrupole ion trap time-of-flight (QIT-TOF) mass spectrometer, metabolite profiling software was applied to locate components of biological significance that could account for the differences between the two strains of rat and a formula prediction software tool was used to help identify individual components. The primary factor discriminating between the two populations was the concentration of endogenous lipids. In the Zucker (fa/fa) obese strain, the dominant ion signals and MS(n) spectra were in agreement with lysoglycerophosphocholine components such as palmitoyllysophosphatidylcholine, 1-oleoylglycerophosphocholine, 1-octadecyl-sn-glycero-3-phosphocholine and 1-stearoylglycerophosphocholine and these were found in relatively higher concentrations compared to the normal wild type. Components were identified using high mass accuracy MS(n) data, formula prediction software and by agreement with published mass spectra through internet databases, rather than using a conventional approach with authentic standards. This application shows that the use of high mass accuracy electrospray ionisation MS(n) together with a software tool can be used effectively to detect and characterise unknown analytes in complex matrices, and represents a promising approach for future profiling studies.     

Determination of anabolic steroids in muscle tissue by liquid chromatography–tandem mass spectrometry

A specific and sensitive multi-method based on liquid chromatography–tandem mass spectrometry using atmospheric pressure chemical ionization (LC–APCI–MS/MS) has been developed for the determination of 20 anabolic steroids in muscle tissue (diethylstilbestrol, β-estradiol, ethynylestradiol, α/β-boldenone, α/β-nortestosterone, methyltestosterone, β-trenbolone, triamcinolone acetonide, dexamethasone, flumethasone, α/β-zearalenol, α/β-zearalanol, zearalenone, melengestrol acetate, megestrol acetate and medroxyprogesterone acetate). The procedure involved hydrolysis, extraction with tert-butyl methyl ether, defattening and final clean-up with solid phase extraction (SPE) on Oasis HLB and Amino cartridges. The analytes were analyzed by reversed-phase LC–MS/MS, in positive and negative multiple reaction monitoring (MRM) mode, acquiring two diagnostic product ions from each of the chosen precursor ions for the unambiguous confirmation of the hormones. The method was validated at the validation level of 0.5 ng/g. The accuracy and precision of the method were satisfactory. The decision limits CCα ranged from 0.03 to 0.14 ng/g while the detection capabilities CCβ ranged from 0.05 to 0.24 ng/g. The developed method is sensitive and useful for detection, quantification and confirmation of these anabolic steroids in muscle tissue and can be used for residue control programs.     

Analysis of anaesthetics and analgesics in human urine by headspace SPME and GC

The determination of widely used anaesthetic and analgesic drugs in biological fluids is of major clinical importance. Typical methods used for sample preparation employ liquid–liquid extraction protocols which are complex, costly, not handy and not amenable to automation. In the present communication, we report the development of a methodology that employs headspace solid‐phase microextraction (HS‐SPME) for the determination of four anaesthetic (lidocaine, midazolam, diazepam and ketamine) and three analgesic drugs (fentanyl, remifentanyl and codeine) in human urine. Important parameters controlling SPME were studied: selection of SPME fibre, type and amount of salt added, preheating and extraction time, extraction temperature, sample volume and desorption time. GC with nitrogen phosphorus detection (GC‐NPD) facilitates sensitive and selective detection of the anaesthetics. The developed method renders an efficient tool for the precise and sensitive determination of the anaesthetics and analgesics in human urine (RSDs ranged from 7.7 to 12.6%, whereas LODs ranged from 0.01 to 1.5 ng/mL). The method was applied to the determination of the anaesthetics and analgesics in human urine from patients that had undergone coronary by‐pass surgery operations. The proposed protocol can function as an attractive alternative for clinical acute intoxications and medico‐legal cases.     

Liquid chromatography–mass spectrometry based global metabolite profiling: A review

Untargeted, global metabolite profiling (often described as metabonomics or metabolomics) represents an expanding research topic and is, potentially, a major pillar for systems biology studies. To obtain holistic metabolic profiles from complex samples, such as biological fluids or tissue extracts, requires powerful, high resolution and information-rich analytical methods and for this spectroscopic technologies are generally used. Mass spectrometry, coupled to liquid chromatography (LC–MS), is increasingly being used for such investigations as a result of the significant advances in both technologies over the past decade. Here we try to critically review the topic of LC–MS-based global metabolic profiling and describe and compare the results offered by different analytical strategies and technologies. This review highlights the current challenges, limitations and opportunities of the current methodology.