Rational Molecular Design towards Vis/NIR Absorption and Fluorescence by using Pyrrolopyrrole aza‐BODIPY and its Highly Conjugated Structures for Organic Photovoltaics

Pyrrolopyrrole aza‐BODIPY (PPAB) developed in our recent study from diketopyrrolopyrrole by titanium tetrachloride‐mediated Schiff‐base formation reaction with heteroaromatic amines is a highly potential chromophore due to its intense absorption and fluorescence in the visible region and high fluorescence quantum yield, which is greater than 0.8. To control the absorption and fluorescence of PPAB, particularly in the near‐infrared (NIR) region, further molecular design was performed using DFT calculations. This results in the postulation that the HOMO–LUMO gap of PPAB is perturbed by the heteroaromatic moieties and the aryl‐substituents. Based on this molecular design, a series of new PPAB molecules was synthesized, in which the largest redshifts of the absorption and fluorescence maxima up to 803 and 850 nm, respectively, were achieved for a PPAB consisting of benzothiazole rings and terthienyl substituents. In contrast to the sharp absorption of PPAB, a PPAB dimer, which was prepared by a cross‐coupling reaction of PPAB monomers, exhibited panchromatic absorption across the UV/Vis/NIR regions. With this series of PPAB chromophores in hand, a potential application of PPAB as an optoelectronic material was investigated. After identifying a suitable PPAB molecule for application in organic photovoltaic cells based on evaluation using time‐resolved microwave conductivity measurements, a maximized power conversion efficiency of 1.27 % was achieved.     

Simultaneous determination of serotonin and 5-hydroxyindole-3-acetic acid in human urine by automated precolumn derivatization and semi-microbore column liquid chromatography with fluorescence detection.

An improved high-performance liquid-chromatographic (HPLC) assay for the simultaneous determination of serotonin (5-HT) and 5-hydroxyindole-3-acetic acid (5-HIAA) in human urine is reported. Following the automated precolumn derivatization of urinary 5-HT and 5-HIAA with benzylamine, the derivatives are separated by isocratic elution on a reversed-phase C18 semi-microbore column, and are fluorometrically detected at an excitation wavelength of 345 nm and an emission wavelength of 480 nm. The detection limits of 5-HT and 5-HIAA are 7 and 5 nmol/l in urine (0.7 and 0.5 fmol/20-microl injection). The proposed automatic method permits a highly selective and sensitive determination of 5-HT and 5-HIAA in human urine without any sample purification.     

InGaAs/InAlAs Five Layer Asymmetric Coupled Quantum Well (FACQW) for Ultra-Wideband Ultrafast Optical Modulators

An InGaAs/InAlAs five-layer asymmetric coupled quantum well (FACQW) is expected to show very large electrorefractive index change. n in a wideband transparency region. Band structures of the FACQW are analyzed with Luttinger-Kohn Hamiltonian. The electrorefractive characteristics of the FACQW are discussed.     

Synthesis of substituted polymethylenes by radical polymerization of alkyl N,N-dialkylfumaramates and maleamates: Relative reactivity of the isomers

Bulk polymerization of alkyl N,N-dialkylfumaramates (FAE) and maleamates (MAE) was performed in the presence of a radical initiator. It has been found that FAE is more reactive than MAE when the reactivity of the two geometrical isomers was compared for their homo- and copolymerizations. From investigation on the effect of ester and N-substituents of these monomers, it has been found that the isopropyl ester shows a higher reactivity than the methyl ester and that N-ethyl and n-butyl substitution gives polymers with high molecular weight of more than several thousands. The resulting substituted polymethylenes from FAE and MAE were characterized and compared with each other. The isomerization of MAE to FAE with morpholine as an isomerization catalyst and monomer-isomerization radical polymerization were also investigated.     

Smectic layer structure of ferroelectric liquid crystal formed between fine polymer fibres

This paper describes the alignment of ferroelectric liquid crystal (FLC) structures formed between aligned polymer fibres, where the FLC smectic layers are determined by polarising microscopy and X-ray diffraction. The FLC/polymer composite films were formed from a nematic phase FLC/monomer solution using a photopolymerisation-induced phase separation method. It was found that bending of the FLC smectic layers was induced in both the film plane and the cross-sectional plane at the phase transition from smectic A to chiral smectic C of the FLC material. The light transmittance properties of the composite film between crossed polarizers was analysed by light propagation simulation in several optical anisotropic media, based on the evaluated smectic layer model.     

Electronic and ionic transports for negative charge carriers in smectic liquid crystalline photoconductor

We have investigated negative charge carrier transport in the smectic mesophases of the 2-phenylnaphthalene derivative, 6-(4'-octylphenyl)-2-dodecyloxynaphthalene (8-PNP-O12), using the time-of-flight (TOF) method. We revealed that the negative charge carrier transport in its smectic mesophases had two different mechanisms, i.e., electronic and ionic conductions: we observed two transits of the carriers in both the smectic A (SmA) and smectic B (SmB) phases and demonstrated their origins by dilution experiments with a hydrocarbon (n-dodecane); the fast transit was attributed to the electronic transport of electrons and the slow one to the ionic transport of negative ions. Furthermore, it was clarified that the ionic transport was caused by small amounts of chemical impurities ionized by trapping photogenerated electrons in 8-PNP-O12 in addition to photoinduced autoionization of the impurities. Furthermore, we determined the trapping lifetimes for electrons to be 140 and 24 mus for the SmA and SmB phases, respectively. The experimental results suggest the coexistence of two distinctive transport channels for these charge carriers in the smectic mesophases.     

Crystal Structure, Electric and Magnetic Properties of Layered Cobaltite β-NaxCoO2

The layered oxide thermoelectric material β-Na_0.67CoO₂ has been studied by powder neutron diffraction, electric and magnetic measurements. This compound includes an edge-sharing CoO₆ slab and a highly vacant Na⁺ sheet in a unit cell (space group symmetry C2/m, a=4.9023(4) Å, b=2.8280(2) Å, c=5.7198(6) Å and β=105.964(6)° at 300 K). The evaluated formal valence of cobalt ion, +3.33(1), is ascribed to the coexistence of Co³⁺ and Co⁴⁺ in the ratio 2:1. Polycrystalline β-Na_0.67CoO₂, a p-type thermoelectric material, exhibits metallic behavior of the electric resistivity below 300 K. The Curie-Weiss-type magnetic susceptibility indicates antiferromagnetic interactions between magnetic cobalt ions in the edge-sharing CoO₆ slab.     

Ionic liquid crystal as a hole transport layer of dye-sensitized solar cells

Use of a new ionic liquid crystal, 1-dodecyl-3-methylimidazolium iodide, and iodine as an electrolyte of dye-sensitized solar cells leads to a high short circuit photocurrent density and a high light-to-electricity conversion efficiency, due to a self-assembled structure of the imidazolium cations, resulting in high conductivity of the electrolyte.     

Chain-growth polycondensation for well-defined aramide. Synthesis of unprecedented block copolymer containing aramide with low polydispersity

Poly(p-benzamide) with a defined molecular weight and a low polydispersity and a block copolymer containing this well-defined aramide was synthesized. Phenyl 4-aminobenzoate, which would yield poly(p-benzamide), did not polymerize under the conditions of chain-growth polycondensation. However, phenyl 4-(4-octyloxybenzylamino)benzoate (1b) polymerized at room temperature in the presence of base and phenyl 4-nitrobenzoate (2) as an initiator in a chain-growth polycondensation manner to give well-defined aromatic polyamides having the 4-octyloxybenzyl groups as a protecting group on nitrogen in an amide. It was confirmed by a model reaction that deprotection of this protecting group proceeded completely with trifluoroacetic acid (TFA) without breaking the amide linkage. The utility of this approach to poly(p-benzamide) with a low polydispersity was demonstrated by the synthesis of block copolymers. Thus, phenyl 4-(octylamino)benzoate (1a) polymerized in the presence of 2 and base, followed by addition of 1b and base to the reaction mixture of the prepolymer to yield the block copolymer of 1a and 1b with a controlled molecular weight and a low polydispersity. The block copolymer was treated with TFA, resulting in a soluble block copolymer of poly(N-octyl-p-benzamide) and poly(p-benzamide). The SEM images of the supramolecular assemblies of the block copolymer showed mum-sized bundles and aggregates of flake structures.