Irreversible Structural Changes of Copper Hexacyanoferrate Used as a Cathode in Zn-Ion Batteries

The structural changes of copper hexacyanoferrate (CuHCF), a Prussian blue analogue, which occur when used as a cathode in an aqueous Zn-ion battery, are investigated using electron microscopy techniques. The evolution of Zn_xCu_1−xHCF phases possessing wire and cubic morphologies from initial CuHCF nanoparticles are monitored after hundreds of cycles. Irreversible introduction of Zn ions to CuHCF is revealed locally using scanning transmission electron microscopy. A substitution mechanism is proposed to explain the increasing Zn content within the cathode material while simultaneously the Cu content is lowered during Zn-ion battery cycling. The present study demonstrates that the irreversible introduction of Zn ions is responsible for the decreasing Zn ion capacity of the CuHCF cathode in high electrolyte concentration.     

Study of the Release Mechanism of Terminalia chebula Extract from Nanoporous Silica Gel

Sol/gel-derived silica gel was prepared at room temperature from tetraethyl orthosilicate precursor. The extracts of Terminalia chebula (Haritoki) were entrapped into the porous silica gel. Fourier transform infrared analysis revealed the proper adsorption of herbal values in the nanopores of the silica gel. Porosity was estimated by transmission electron microscope studies. The release kinetics of the extract in both 0.1 N HCl, pH 1.2, and Phosphate-buffer saline (PBS), pH 7.2, were determined using UV–Vis spectroscopy. Different dissolution models were applied to release data in order to evaluate the release mechanisms and kinetics. Biphasic release patterns were found in every formulation for both the buffer systems. The kinetics followed a zero-order equation for first 4 h and a Higuchi expression in a subsequent timeline in the case of 0.1 N HCl. In the case of PBS, the formulations showed best linearity with a first-order equation followed by Higuchi’s model. The sustained release of the extract predominantly followed diffusion and super case II transport mechanism. The release value was always above the minimum inhibitory concentration.     

Bioleaching of Nickel and Cobalt from Lateritic Chromite Overburden Using the Culture Filtrate of Aspergillus niger

Extraction of metals (Ni, Co) from chromite overburden of Sukinda mines of Orissa, India, with the culture filtrate of Aspergillus niger was studied. Results showed that the amounts of metals leached varied directly with reaction temperature and period of fermentation. The culture filtrate was analyzed for citric and oxalic acids, and contained only oxalic acid—the concentration of which increased with time. Although this acid played the major role in leaching of metals, other unidentified metabolites present in the culture filtrate influenced the dissolution of the metals significantly. Maximum recovery of metals from raw and roasted ore samples was achieved at 80 °C with the 21-day culture filtrate containing the highest amount of oxalic acid. Under identical experimental conditions, much higher amounts of the metals were leached from roasted ore. Microstructures of the ore particles were studied by scanning electron microscopy and transmission electron microscopy; the bonding behaviors of metal compounds were identified by Fourier transform infrared spectroscopy which showed that the metals were leached after chelation with oxalic acid.     

Characterization of Food Packaging Films with Blackcurrant Fruit Waste as a Source of Antioxidant and Color Sensing Intelligent Material

Chitosan and pectin films were enriched with blackcurrant pomace powder (10 and 20% (w/w)), as bio-based material, to minimize food production losses and to increase the functional properties of produced films aimed at food coatings and wrappers. Water vapor permeability of active films increased up to 25%, moisture content for 27% in pectin-based ones, but water solubility was not significantly modified. Mechanical properties (tensile strength, elongation at break and Young’s modulus) were mainly decreased due to the residual insoluble particles present in blackcurrant waste. FTIR analysis showed no significant changes between the film samples. The degradation temperatures, determined by DSC, were reduced by 18 °C for chitosan-based samples and of 32 °C lower for the pectin-based samples with blackcurrant powder, indicating a disturbance in polymer stability. The antioxidant activity of active films was increased up to 30-fold. Lightness and redness of dry films significantly changed depending on the polymer type. Significant color changes, especially in chitosan film formulations, were observed after exposure to different pH buffers. This effect is further explored in formulations that were used as color change indicators for intelligent biopackaging.     

Fabrication and Characterization of Zinc Oxide Nanowire Based Two-electrode Capacitive Biosensors on Flexible Substrates for Estimating Glucose Content in a Sample

The present work deals with fabrication and characterization of the zinc oxide (ZnO) nanowire based novel two-electrode capacitive biosensors on flexible Polyethylene terephthalate (PET) substrates for accurate estimation of glucose by analyzing the fundamental dielectric nature of the relevant sample. The morphology and crystalline quality of grown nanowires are analyzed by using field-emission scanning electron microscope (FESEM) and X-ray diffractometer (XRD), respectively. Current and capacitance values of the device have been studied for ten different glucose concentrations relevant to the physiological standards. The analytical performance of the devices in terms of enzyme activity, reliability and flexibility has also been evaluated.     

Robust classification for skewed data

In this paper we propose a robust classification rule for skewed unimodal distributions. For low dimensional data, the classifier is based on minimizing the adjusted outlyingness to each group. In the case of high dimensional data, the robustified SIMCA method is adjusted for skewness. The robustness of the methods is investigated through different simulations and by applying it to some datasets.     

Synthesis of Nitrogen Doped Multilayered Graphene Flakes: Selective Non‐enzymatic Electrochemical Determination of Dopamine and Uric Acid in presence of Ascorbic Acid.

Nitrogen doped multilayered graphene (NDMLG) is synthesized by annealing the black fluffy mass obtained by decomposing the complex prepared from Zn(OAc)₂, diethanolamine and triethanolamine. The NDMLG has been characterized by HRTEM, FESEM, XRD, XPS, Raman spectroscopy, BET which indicate formation of nitrogen doped multilayer graphene flakes with high surface area. NDMLG shows better electrochemical oxidation property towards Dopamine, Uric acid and Ascorbic acid. The linear response ranges for determination of DA, UA and AA are 0.5–150 µM, 3–60 µM and 80–2000 µM respectively and the detection limits (S/N=3) are 15 nM, 15 nM, 580 nM, respectively in the mixture.     

Supramolecular self-assembly of water-soluble cavitands: investigated by molecular dynamics simulation

In this study, we have examined supramolecular self-assembly process of a hydrophobic guest with a water-soluble host known by the trivial name octa acid (OA). Two octa acids form a capsular assembly only in presence of a nonpolar guest(s). Size and shape of the guest control the stoichiometry of the capsular complex. Here, all atom molecular dynamics simulation has been utilized to investigate complex formation mechanisms of a nonpolar guest (nonylbenzene) with two OA cavitands. Nonylbenzene was encapsulated into the nonpolar cavity of OA capsule owing to solvophobic interactions. Upon encapsulation it was twisted and bent due to lack of free space within the capsule. These unusual forms obtained from the simulation study were in accord with experimental findings. The post-complexation attributes of the guest were regulated by the available free space within the OA and favorable non-covalent interactions between the guest and the walls of the OA capsule. In the identical simulation condition two OA cavitands did not form a capsule without a guest, thus indicating requirement of a guest during the self-assembly of OA cavitands.