A three-component cyclocondensation reaction for the synthesis of new triazolo[1,5-a]pyrimidine scaffolds using 3-aminotriazole,aldehydes and ketene N,S-acetal

Molecular Diversity - This study describes the use of 3-aminotriazole, different aldehydes and N-methyl-1-(methylthio)-2-nitroethenamine as a ketene N,S-acetal in a three-component condensation for...     

Spectrophotometric resolution of ternary mixtures of pseudoephedrine hydrochloride, dextromethorphan hydrobromide, and sodium benzoate in syrups using wavelength selection by net analyte signals calculated with hybrid linear analysis

Hybrid linear analysis (HLA), as a recent factor-based multivariate calibration technique, was applied for the spectrophotometric determination of ternary mixtures of pseudoephedrine hydrochloride (PSU), dextromethorphan hydrobromide (DXT), and sodium benzoate (BNZ). The utilized HLA was assisted by a wavelength selection procedure which was based on the calculation of the net analyte signal (NAS) regression plot in any considered wavelengths window for each test sample, in addition to a moving window strategy for searching the region with maximum linearity of NAS regression plot (minimum error indicator (EI)). HLA was applied because it was simpler to adapt to the NAS regression plot methodology, and also used less factors than partial least squares (PLS). An orthogonal array design was applied for formation of calibration and prediction sets in the concentration ranges 0-7500 μmol L⁻¹ for PSU, 0-300 μmol L⁻¹ for DXT, and 0-1400 μmol L⁻¹ for BNZ. The method had the ability to select wavelength regions that minimize the effect of non-linearity of the spectral data, in addition to that of non-modeled interferences. The application of the selected wavelength regions improved the obtained relative standard error of predictions for PSU, DXT, and BNZ, respectively, from 5.24, 8.67, and 5.48% to 2.19, 5.21, and 3.62% (using lower number of factors). To check the ability of the proposed method in selection of linear regions of spectra, a test for detecting non-linear regions of spectral data in multivariate spectroscopic assays was also described. Additives in the commercial syrup samples did not interfere with their determinations. The method was successfully applied for the determination of pseudoephedrine HCl, dextromethorphan HBr, and sodium benzoate in cough suppressant syrup samples.     

Functionalization of cellulose nanocrystal powder by non-thermal atmospheric-pressure plasmas

Cellulose - Despite promising characteristics such as the biodegradability and the environmentally benign nature of cellulose nanocrystal (CNC) based composites, their poor dispersion and...     

A new approach in modeling of constant temperature boundary condition in thermal lattice‐Boltzmann method

The lattice‐Boltzmann method is being applied to a diversity of fluid flow and heat transfer problems nowadays. Because of its microscale nature, strict attention should be paid when introducing macroscopic inputs to the model. One of the challenging issues dealing with macroscale and microscale treatment is the implementation of boundary conditions. In this regard constant‐temperature boundaries are frequently used in energy transfer problems. Such boundaries are simply modeled in Navier–Stokes based solvers, but they are not so harnessed in lattice‐Boltzmann models. One of the problems is that the calculated tangential heat flux is not zero along such boundaries in most of the previous models. In the present paper, a model has been developed, which has the capability of controlling tangential heat flux along the constant‐temperature boundaries. It aims to set the heat flux nearly zero along the boundary in midplane grid schemes. Copyright © 2012 John Wiley & Sons, Ltd.     

Finely dispersed palladium on silk‐fibroin as an efficient and ligand‐free catalyst for Heck cross‐coupling reaction

A palladium–fibroin complex (Pd/Fib.) was prepared by the addition of sonicated fibroin fiber in water to palladium acetate solution. Pd (OAc)₂ was absorbed by fibroin and reduced with NaBH₄ at room temperature to the Pd(0) nanoparticles. Powder‐X‐ray diffraction, scanning electron microscopy–energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, CHN elemental analysis and inductively coupled plasma‐atomic emission spectroscopy were carried out to characterize the Pd/Fib. catalyst. Catalytic activity of this finely dispersed palladium was examined in the Heck coupling reaction. The catalytic coupling of aryl halides (‐Cl, ‐Br, ‐I) and olefins led to the formation of the corresponding coupled products in moderate to high yields under air atmosphere. A variety of substrates, including electron‐rich and electron‐poor aryl halides, were converted smoothly to the targeted products in simple procedure. Heterogeneous supported Pd catalyst can be recycled and reused several times.     

Ag3[PMo12O40]: An efficient and green catalyst for the synthesis of highly functionalized pyran‐annulated heterocycles via multicomponent reaction

A facile, efficient and eco‐friendly catalytic protocol was developed for the synthesis of medicinally important pyran‐annulated heterocycles via multicomponent reaction (MCR). Cyclocondensation of differently substituted aromatic aldehydes, malononitrile/ethyl cyanoacetate and various β‐dicarbonyl compounds in the presence of Ag₃[PMo₁₂O₄₀]?nH₂O as heterogeneous catalyst, in EtOH–H₂O, afforded diverse pyran‐fused chromene analogues. The merits observed for this approach were it being conducted via MCR, using commercially available or easily accessible starting materials in the presence of a green and easily separable heterogeneous and reusable catalyst, and affording high yields of desired products in very short reaction times with high purity in one‐pot fashion, thus providing a superior alternative approach for the synthesis of pyran‐annulated heterocycles.     

A numerical investigation of developing flow in an eccentric curved annulus in the presence of gravity

In this article developing incompressible viscous flow in an eccentric curved annulus in the presence of gravity is numerically studied using a second order finite difference method based on the projection algorithm to solve the governing equations including the continuity and full Navier–Stokes equations. The equations written in a bipolar–toroidal coordinate system are discretized in a three dimensional staggered grid. The effects of governing non-dimensional parameters including the eccentricity, non-dimensional curvature ratio, Dean number, Froude number, aspect ratio, and the Reynolds number on the flow field in the entrance and fully developed region are investigated. The numerical results indicate that at the small Froude numbers, the flow field distorts from the symmetrical condition due to the larger body force effect and the axial velocity formation mostly takes place at the lower half of the annulus. In addition, at the constant Froude number, by decreasing the curvature radius, the peak axial velocity and its sharp gradient appear on the outer curvature region due to the larger centrifugal forces and by increasing the eccentricity the flow rate intensifies at the wider region and weakens at the narrower region due to the larger flow resistance. Furthermore, the friction factor increases by decreasing the Froude number and increasing the Dean number.     

Protein–ligand docking using FFT based sampling: D3R case study

Fast Fourier transform (FFT) based approaches have been successful in application to modeling of relatively rigid protein–protein complexes. Recently, we have been able to adapt the FFT methodology to treatment of flexible protein–peptide interactions. Here, we report our latest attempt to expand the capabilities of the FFT approach to treatment of flexible protein–ligand interactions in application to the D3R PL-2016-1 challenge. Based on the D3R assessment, our FFT approach in conjunction with Monte Carlo minimization off-grid refinement was among the top performing methods in the challenge. The potential advantage of our method is its ability to globally sample the protein–ligand interaction landscape, which will be explored in further applications.     

Isocyanide-based four-component synthesis of ferrocenyl 1,5-disubstituted tetrazoles

A convenient four-component synthesis of ferrocenyl tetrazoles by the reaction of ferrocenecarboxaldehyde, isocyanides, azidotrimethylsilane and alkyl or aryl amines in CH₂Cl₂ at room temperature is reported.