Glycosyl azide—a novel substrate for enzymatic transglycosylations

Glycosyl azides are new efficient donors for glycosidases. Their high water solubility facilitates transglycosylations with comparable or better yields than common O-glycosides. The azido group totally changes the β-GalNAc-ase/β-GlcNAc-ase ratio in β-N-acetylhexosaminidases (from the usual 0.3-1.0 to <0.01), contrary to all known aglycons.     

A multivalued version of Sharkovskiĭ’s theorem holds with at most two exceptions

A multivalued version of Sharkovskiĭ’s theorem is formulated for M-maps on linear continua and, more generally, for triangular M-maps on a Cartesian product of linear continua. This improves the main result of [AP1] in the sense that our multivalued analogue holds with at most two exceptions. A further specification requires some additional restrictions. For instance, 3- orbits of m-maps imply the existence of k-orbits for all k ? \mathbbNk \in {\mathbb{N}} , except possibly for k ?k \in {4, 6}. It is also shown that, on every connected linearly ordered topological space, an M-map with orbits of all periods can always be constructed. This demonstrates that Baldwin’s classification of linear continua in terms of admissible periods [Ba] is useless for multivalued maps.     

Square-wave voltammetric determination of cefoperazone in a bacterial culture,pharmaceutical drug,milk, and urine

Use of square-wave voltammetry (SWV) for determination of cefoperazone (CFPZ) in some buffers, bacterial culture, urine, and milk is described. CFPZ provides a specific voltammetric signal which is affected by pH and solution components. Determination of CFPZ in Britton–Robinson buffer, pH 4.4, is sensitive with a low detection limit (about 0.5 nmol L^–1). In a more complex medium (bacterial 2YT medium, pH 7.2) the detection limit was approximately 1.5 mol L^–1. We provide evidence that SWV is a suitable and quick method for CFPZ determination in a culture of living bacteria without separation of biomass. We have found big differences between methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-sensitive Staphylococcus aureus (MSSA) in cultivation in the presence of CFPZ, depending on time. When CFPZ is cleaved by penicillinase, a new SWV peak b appears at more positive potentials. This peak rises both with increasing concentration of enzyme and with cleavage time while the original CFPZ peak is simultaneously decreasing. We determined the concentration of CFPZ in the drug Pathozone by the standard addition method and achieved good agreement with the declared value of CFPZ in the drug. With a simple pretreatment procedure it is possible to determine CFPZ in milk; for urine no pretreatment was required. Using SWV we could detect CFPZ concentrations as low as 500 nmol L^–1 in bovine milk and human urine.     

Biodegradable and pH-sensitive hydrogels: Synthesis by crosslinking of N,N-dimethylacrylamide copolymer precursors

Novel pH-sensitive hydrogels containing azoaromatic crosslinks were synthesized by the crosslinking of polymeric precursors. First, a reactive polymeric precursor was synthesized by copolymerization of N,N-dimethylacrylamide, N-tert-butylacrylamide, acrylic acid, and N-methacryloylglycylglycine p-nitrophenyl ester. The hydrogel was prepared in the second step by the reaction of the polymeric precursor with N,N′-(ω-aminocaproyl)-4,4′-diaminoazobenzene. The hydrogels were characterized by the network structure, (that is, content of crosslinks, unreacted pendent groups, and cycles), the equilibrium swelling ratio as a function of pH, modulus of elasticity in compression, and the degradability in vitro. The results obtained indicated that the hydrogel network structure strongly depends on the reaction conditions such as polymer concentration, and the ratio of the reactive groups during the crosslinking reaction. The swelling and mechanical properties of hydrogels can be controlled by the modification of polymer backbone structure and/or the crosslinking density. The rates of hydrogel degradation depended on their degree of swelling. The higher the degree of swelling, the higher the degradability. The properties of the hydrogels suggest that they have a potential as carriers for colon-specific drug delivery. © 1994 John Wiley & Sons, Inc.     

Coordination of extraframework Li+ cation in the MCM-22 and MCM-36 zeolite: FTIR study of CO adsorbed

Nature and population of Li⁺ cationic sites in MCM-22 zeolite and its pillared form (MCM-36) were investigated by means of adsorption of CO as a probe molecule. CO stretching frequency and adsorption heat were measured by FTIR spectroscopy and adsorption microcalorimetry. Intrazeolitic carbonyl complexes on Li⁺ cations in MCM-22 and MCM-36 are characterized by two main vibrational bands at 2,195 and 2,188 cm^?1. Band at higher wavenumbers is ascribed to carbonyls on Li⁺ ions coordinated only to two oxygen atoms at the intersection of 10-ring channels and interacting with CO molecule by energy around 45 kJ mol^?1. Band at 2,188 cm^?1 was assigned to the carbonyls on Li⁺ cations located on top of 5 or 6-rings on the channel walls and coordinated to three or four oxygen atoms, interacting with CO molecule by energy 33–36 kJ mol^?1. Effect of pillaring and layered form of zeolite on nature and population of Li⁺ cationic sites is also discussed, as well as the formation of dicarbonyl complexes.     

Effects of accelerated carbonation on properties of ceramic-based geopolymers

Journal of Thermal Analysis and Calorimetry - Geopolymers are considered as environmentally friendly binders with a high potential not only to lower the prices of binders, but mainly to decrease...     

The Assembly‐Disassembly‐Organization‐Reassembly Mechanism for 3D‐2D‐3D Transformation of Germanosilicate IWW Zeolite

Hydrolysis of germanosilicate zeolites with the IWW structure shows two different outcomes depending on the composition of the starting materials. Ge‐rich IWW (Si/Ge=3.1) is disassembled into a layered material (IPC‐5P), which can be reassembled into an almost pure silica IWW on treatment with diethoxydimethylsilane. Ge‐poor IWW (Si/Ge=6.4) is not completely disassembled on hydrolysis, but retains some 3D connectivity. This structure can be reassembled into IWW by incorporation of Al to fill the defects left when the Ge is removed.     

Zeolites with Continuously Tuneable Porosity

Zeolites are important materials whose utility in industry depends on the nature of their porous structure. Control over microporosity is therefore a vitally important target. Unfortunately, traditional methods for controlling porosity, in particular the use of organic structure‐directing agents, are relatively coarse and provide almost no opportunity to tune the porosity as required. Here we show how zeolites with a continuously tuneable surface area and micropore volume over a wide range can be prepared. This means that a particular surface area or micropore volume can be precisely tuned. The range of porosity we can target covers the whole range of useful zeolite porosity: from small pores consisting of 8‐rings all the way to extra‐large pores consisting of 14‐rings.     

Betacyanins and Betaxanthins in Cultivated Varieties of Beta vulgaris L. Compared to Weed Beets

There are 11 different varieties of Beta vulgaris L. that are used in the food industry, including sugar beets, beetroots, Swiss chard, and fodder beets. The typical red coloration of their tissues is caused by the indole-derived glycosides known as betalains that were analyzed in hypocotyl extracts by UV/Vis spectrophotometry to determine the content of betacyanins (betanin) and of betaxanthins (vulgaxanthin I) as constituents of the total betalain content. Fields of beet crops use to be also infested by wild beets, hybrids related to B. vulgaris subsp. maritima or B. macrocarpa Guss., which significantly decrease the quality and quantity of sugar beet yield; additionally, these plants produce betalains at an early stage. All tested B. vulgaris varieties could be distinguished from weed beets according to betacyanins, betaxanthins or total betalain content. The highest values of betacyanins were found in beetroots ‘Monorubra’ (9.69 mg/100 mL) and ‘Libero’ (8.42 mg/100 mL). Other beet varieties contained less betacyanins: Sugar beet ‘Labonita’ 0.11 mg/100 mL; Swiss chard ‘Lucullus,’ 0.09 mg/100 mL; fodder beet ‘Monro’ 0.15 mg/100 mL. In contrast with weed beets and beetroots, these varieties have a ratio of betacyanins to betaxanthins under 1.0, but the betaxanthin content was higher in beetcrops than in wild beet and can be used as an alternative to non-red varieties. Stability tests of selected varieties showed that storage at 22 °C for 6 h, or at 7 °C for 24 h, did not significantly reduce the betalain content in the samples.     

Mechanisms of cytotoxicity in human ovarian carcinoma cells exposed to free Mce6 or HPMA copolymer-Mce6 conjugates

It is essential to understand cellular responses on photodynamic therapy (PDT) to design delivery systems that maximize cytotoxic effects coupled with minimal induction of side effects or protective mechanisms (or both). Here, we investigated mechanisms of toxicity in human ovarian carcinoma A2780 cells treated with structurally diverse N-(2-hydroxypropyl)methacrylamide (HPMA) copolymer (P)-mesochlorin e6 monoethylenediamine (Mce6) conjugates that possessed differential subcellular accumulation or covalent attachments of photosensitizers (or both). Apoptosis and necrosis were observed after photoactivation, with increased apoptotic responses observed in cells exposed to conjugates possessing Mce6 linkage via a lysosomally degradable tetrapeptide spacer (HPMA copolymer-Mce6 conjugates containing Mce6 bound via glycylphenylalanylleucylglycine [GFLG] linker [P-GFLG-Mce6], HPMA copolymer-Mce6 conjugates containing Mce6 bound via a GFLG spacer and containing nuclear localization sequence, PKKKRKV132K(FITC)C [NLS(fluorescein-5-isothiocyanate [FITC])] bound via a thioether linkage [P-NLS(FITC)-GFLG-Mce6]). Furthermore, the induction of necrosis was more pronounced in cells exposed to conjugates containing both a nuclear localization sequence (NLS) and Mce6 bound by a degradable linker (P-NLS(FITC)-GFLG-Mce6). Caspase-independent mechanisms of cell death were identified in cells treated with nuclear-targeted conjugates possessing Mce6 attached using a nondegradable tether (HPMA copolymer-Mce6 conjugates containing Mce6 bound via a GG spacer and containing NLS(FITC) bound via a thioether linkage [P-NLS(FITC)-GG-Mce6]), whereas low levels of apoptosis and necrosis were detected in cells exposed to photoactivated nontargeted HPMA copolymer-Mce6 conjugates containing Mce6 coupled through a nondegradable spacer (HPMA copolymer-Mce6 conjugates containing Mce6 bound via GG linker [P-GG-Mce6]). Variations in gene expression were observed in cells on PDT. Specifically, HSP70 expression was solely detected in cells treated with P-GFLG-Mce6, whereas the loss of detection of several genes were observed in cells treated with P-NLS(FITC)-GFLG-Mce6. Variations in cellular responses on PDT using different HPMA copolymer-Mce6 conjugates will prove useful in the design of optimal HPMA copolymer PDT delivery systems.