Forensic classification of ballpoint pen inks using high performance liquid chromatography and infrared spectroscopy with principal components analysis and linear discriminant analysis

Several varieties of blue ballpoint pen inks were analyzed by high performance liquid chromatography (HPLC) and infrared spectroscopy (IR). The chromatographic data extracted at four wavelengths (254, 279, 370 and 400 nm) was analyzed individually and at a combination of these wavelengths by the soft independent modeling of class analogies (SIMCA) technique using principal components analysis (PCA) to estimate the separation between the pen samples. Linear discriminant analysis (LDA) measured the probability with which an observation could be assigned to a pen class. The best resolution was obtained by HPLC using data from all four wavelengths together, differentiating 96.4% pen pairs successfully using PCA and 97.9% pen samples by LDA. PCA separated 60.7% of the pen pairs and LDA provided a correct classification of 62.5% of the pens analyzed by IR. The results of this study indicate that HPLC coupled with chemometrics provided a better discrimination of ballpoint pen inks compared to IR. The need to develop a suitable IR method for analysing blue ballpoint pen inks has been emphasized and it is hoped that the development of such a method would indeed provide a valuable tool for the non-destructive analysis of blue ballpoint pen ink samples for forensic purposes.     

Expert system for precision testing in validation of liquid chromatographic methods

After a liquid chromatographic method has been developed, it must be validated to establish its limitations in daily use. Method validation is becoming increasingly important as stricter rules are applied by regulatory authorities. Precision testing is a vital step in this validation; both intralaboratory testing and interlaboratory testing are needed. In an intralaboratory test, repeatability and ruggedness tests are usually done. Expert systems are available for both tests. Here they are integrated to form an intralaboratory precision-testing expert system; special integration architecture is described. Important features of the integrated system are a supervisor containing planning knowledge about the tests and a common data structure containing all the objects necessary for an expert system in this area.     

Differential transition-state stabilization in enzyme catalysis: quantum chemical analysis of interactions in the chorismate mutase reaction and prediction of the optimal catalytic field

Chorismate mutase is a key model system in the development of theories of enzyme catalysis. To analyze the physical nature of catalytic interactions within the enzyme active site and to estimate the stabilization of the transition state (TS) relative to the substrate (differential transition state stabilization, DTSS), we have carried out nonempirical variation-perturbation analysis of the electrostatic, exchange, delocalization, and correlation interactions of the enzyme-bound substrate and transition-state structures derived from ab initio QM/MM modeling of Bacillus subtilis chorismate mutase. Significant TS stabilization by approximately -23 kcal/mol [MP2/6-31G(d)] relative to the bound substrate is in agreement with that of previous QM/MM modeling and contrasts with suggestions that catalysis by this enzyme arises purely from conformational selection effects. The most important contributions to DTSS come from the residues, Arg90, Arg7, Glu78, a crystallographic water molecule, Arg116, and Arg63, and are dominated by electrostatic effects. Analysis of the differential electrostatic potential of the TS and substrate allows calculation of the catalytic field, predicting the optimal location of charged groups to achieve maximal DTSS. Comparison with the active site of the enzyme from those of several species shows that the positions of charged active site residues correspond closely to the optimal catalytic field, showing that the enzyme has evolved specifically to stabilize the TS relative to the substrate.     

Expert systems for method development and validation in HPLC

ESCA, Expert Systems Applied to Chemical Analysis, started its research in March 1987, with the aim of building prototype expert systems for HPLC method development. Results of this research have been published as the work has progressed. The project is now completed and this paper summarises some of the overall project conclusions. Seven different expert systems have been built which tackle problems throughout the process of method development, four stand-alone systems and three integrated systems. The object of ESCA was to evaluate the applicability of expert system technology to analytical chemistry and not all the systems were built for commercial uses. Many of the systems tackle problems specific to one or more of the partners and thus may not be useful outside this environment. However, the results of the work are still pertinent to analysts wishing to build their own systems. These results are described, however, the emphasis of the paper is on those systems developed for method validation.Method validation for HPLC is a complex task which requires many characteristics of the method to be tested, e.g. accuracy, precision, etc. The expert systems built within ESCA concern the validation of precision. Two systems were developed for repeatability testing and ruggedness testing. The method validation process can be divided into several discrete stages, these include: (1) The selection of the method feature to test, for instance which factors can influence the ruggedness of a method. (2) The definition of a test procedure, for instance an efficient statistical design. (3) The execution of experiments and the interpretation of results. (4) A diagnosis of any observed problem. This paper describes these two systems in some detail and summarises some of the results obtained from their evaluation. It concludes that expert systems can be useful in solving analytical problems and the integration of several expert systems can provide extremely powerful tools for the analyst.     

Investigation of the limitations of saturated fractional factorial experimental designs,with confounding effects for an HPLC ruggedness test

Summary Recently much attention has been directed to the validation of analytical methods. The level of validation will depend on the method application. If a method is developed for general use, for instance by different analysts, instruments or laboratories, then the effect of these changes need evaluation. This is normally referred to as ruggedness testing, where the limitations of the method to changes in the specified conditions are examined.This paper examines the use of Plackett-Burman fractional factorial experiment designs for ruggedness testing in high performance liquid chromatography (HPLC). The ability of these designs to identify confounding effects is applied to the stability indicating analysis of Salbutamol and its major degradation product, AH4045. The results show that confounding effects, proving extremely pertinent to HPLC, can be identified.The assay proved rugged to most tested changes although not to the use of column packing material from different manufacturers.     

Antimicrobial Metabolites against Methicillin-Resistant Staphylococcus aureus from the Endophytic Fungus Neofusicoccum australe

Antimicrobial bioassay-guided fractionation of the endophytic fungi Neofusicoccum australe led to the isolation of a new unsymmetrical naphthoquinone dimer, neofusnaphthoquinone B (1), along with four known natural products (2–5). Structure elucidation was conducted by nuclear magnetic resonance (NMR) spectroscopic methods, and the antimicrobial activity of all the natural products was investigated, revealing 1 to be moderately active towards methicillin-resistant Staphylococcus aureus (MRSA) with a minimum inhibitory concentration (MIC) of 16 µg/mL.     

Polarized light-scattering measurements of dielectric spheres upon a silicon surface

The polarization of light scattered into directions out of the plane of incidence by polystyrene latex spheres upon a silicon substrate was measured for p -polarized incident light. The experimental data show good agreement with theoretical predictions for three sizes of spheres. These results demonstrate that the polarization of light scattered by particles can be used to determine the size of particulate contaminants on silicon wafers. Theoretical models, based on successive degrees of approximation, indicate that the mean distance of a particle from the surface is the primary determinant of the scattered light polarization for small out-of-plane scattering angles.     

Nanometer Calibration Particles: What is Available and What is Needed?

Information on available polystyrene calibration spheres is presented regarding the particle diameter, uncertainty in the size, and the width of the size distribution for particles in a size range between 20 and 100nm. The use of differential mobility analysis for measuring the single primary calibration standard in this size range, 100nm NIST Standard Reference Material®1963, is described along with the key factors in the uncertainty assessment. The issues of differences between international standards and traceability to the NIST Standard are presented. The lack of suitable polystyrene spheres in the 20–40nm size range will be discussed in terms of measurement uncertainty and width of the size distributions. Results on characterizing a new class of molecular particles known as dendrimers will be described and the possibilities of using these as size calibration standards for the size range from 3 to 15nm will be discussed.     

Ankyrin repeat and SOCS box containing protein 4 (Asb-4) colocalizes with insulin receptor substrate 4 (IRS4) in the hypothalamic neurons and mediates IRS4 degradation

Background

Cigarette smoking enhances the risk of stroke. However, the underlying molecular mechanisms are largely unknown. The present study established an in vivo rat secondhand cigarette smoking (SHS) model and examined the hypothesis that SHS upregulates endothelin receptors with increased cerebrovascular contraction via the Raf/extracellular signal-regulated kinase (ERK)/mitogen-activated protein kinases (MAPK) pathway.

Results

Rats were exposed to SHS for up to 8 weeks. The cerebral artery vasoconstriction was recorded by a sensitive myograph. The mRNA and protein expressions for endothelin receptors in cerebral arteries were studied by real-time PCR and Western blot. Compared to fresh air exposed rats, cerebral arteries from SHS rats exhibited stronger contractile responses (P < 0.05) mediated by endothelin type A (ET_A) receptors. The expressions of mRNA and protein for ET_A receptors in the cerebral arteries from SHS rats were higher (P < 0.05) than that in control. SHS did not affect endothelin type B (ET_B) receptor-mediated contractions, mRNA or protein levels. The results suggest that SHS upregulates ET_A, but not ET_B receptors in vivo. After SHS exposure, the mRNA levels of Raf-1 and ERK1/2, the protein expression of phosphorylated (p)-Raf-1 and p-ERK1/2 were increased (P < 0.05). Raf-1 inhibitor, GW5074 suppressed the enhanced ET_A receptor-mediated contraction, mRNA and protein levels induced by SHS. In addition, GW5074 inhibited the SHS-caused increased mRNA and phosphorylated protein levels of Raf-1 and ERK1/2, suggesting that SHS induces activation of the Raf/ERK/MAPK pathway.

Conclusions

SHS upregulates cerebrovascular ET_A receptors via the Raf/ERK/MAPK pathway, which provides novel understanding of mechanisms involved in SHS-associated stroke.     

A robust technique for the group classification of the C-13 NMR spectra of natural products from Meliaceae

Rapeseed, soybean and sunflower seeds are used for a comparison of solvent extractions by SFE, ASE, fexIKA and Soxtherm apparatus with the official standard method B-I 5 (87) by the DGF. The optimal extraction parameters for each method are evaluated. The extracts are analysed regarding the composition of tocopherols, as a parameter for mild extraction conditions and the content of free fatty acids and diglycerides, as a parameter for the recovery of more polar lipids. The obtained results for oil content using the optimised methods agree well with the standard method. Differences occur in the results of tocopherol composition and free fatty acid and diglyceride contents. The SFE method shows the highest recovery regarding the tocopherol content. The extraction period by SFE is reduced to about 40 min in contrast to 4 h of the DGF standard method. The other methods also provide considerable time reductions, but showed lower tocopherols and free fatty acid contents. Received: 25 September 1998 / Revised: 18 January 1999 / Accepted: 21 January 1999