Molecular-shape recognition of polycyclic aromatic hydrocarbons in reversed phase liquid chromatography

Summary The molecular-shape recognition of polycyclic aromatic hydrocarbons has been studied on various stationary phases in reversed-phase high-performance liquid chromatography. The examined stationary phases were phenyl-, diphenyl-, triphenyl- and benzyl-bonded silicas. The results of regression analysis inidcated that triphenylsilica is the best packing material to recognize the difference in the molecular-shape of structural isomers. This fact was confirmed by the separation of 4-ring isomers.     

Polydimethylsiloxane connection for quartz microchips in a high-pressure system.

An interconnecting technique, the "PDMS connection method", for quartz microchips in a high-pressure system is presented. The connection between quartz microchips is an essential technology for modular microfluidic devices, such as microchip-HPLC. PDMS was applied to the seal material, being spread on the seal side of the chips, and set into the metal housing. The characteristics of the PDMS connection method concerning pressure resistance and the extension of the peak were examined. The experimental results showed a good seal at 5 MPa, which seem to be sufficient for realizing microchip-HPLC utilizing a monolithic silica capillary column as a separation medium. The influence of the extra column effect on chromatographic separation was almost the same as in the case using a commercial union fitting. In addition, the PDMS connection enabled the detachability of chip-based modules with user-friendliness. Our experimental findings suggest that the novel PDMS connection method can possibly be applied as a generic technology in high-pressure microTAS.     

A simple technique to measure regional cerebral blood flow during intravascular balloon clamping

A case of giant internal carotid ophthalmic aneurysm was presented. In order to clarify whether the patient could tolerate carotid occlusion, a balloon clamping test was performed. before surgery. The cerebral blood flow was measured using early imaging by single photon emission computed tomography (SPECT) with N-isopropyl-(iodine-123)-p-iodoamphetamine (123I-IMP). When the balloon clamping test was performed the tracer was injected, and scanning was performed 35 minutes after removing the catheter. This tracer enabled a "memory of blood flow" during temporary ischemia to determine the character of quick diffusion and slow wash out, that could not be performed by other methods of cerebral blood flow measurement. SPECT with 123I-IMP can simplify the measurement of cerebral blood flow during the balloon clamping test.     

Development of miniaturized multi-channel high-performance liquid chromatography for high-throughput analysis

We have developed miniaturized multi-channel high-performance liquid chromatography (HPLC) system. With this system, we can simultaneously separate multiple samples, using a single high-pressure gradient pump, a chip-based sample injection unit, a monolithic silica capillary column array, and a multi-channel UV detection unit based on fiber optics. The injection unit has a simplified structure composed of brass housing and a quartz microchip having microchannels and access ports, which enable a direct injection of sample to multi-channel by commercial multichannel micropipette. Moreover, that possesses a function of microvalve, and on-chip definition of sample injection plugs achieved with a cross channel injection method, providing each column of monolithic silica capillary array. The substances in channels were simultaneously detected with UV having multiple cells. Standard samples were analyzed for characterizing newly developed system, and sharp peaks were obtained with reproducibility data of < 0.9% (R.S.D.). Analysis of tryptic digestion of casein was also employed. These results show that the novel multi-channel HPLC system has the benefits for the high-throughput analysis in the post-genomic analysis/combinatorial chemistry.     

Universal fluorescent labeling of amplification products using locked nucleic acids

Amplification/hybridization‐based genetic analyses using primers containing locked nucleic acids (LNAs) present many benefits. Here, we developed a novel design for universal fluorescent PCR using LNAs. Universal fluorescent PCR generates intermediate nonlabeled fragments and final fluorescent fragments in a two‐step amplification process that uses locus‐specific primers with universal tails and universal fluorescent primers. In this study, a few standard nucleotides were replaced with LNAs only in the fluorescent universal primers. The sequence of the fluorescent universal primer significantly affected the amplification efficiency. For primers with three LNAs, the fluorescent primers with stable M13(‐47) sequences provided the most efficient signal (approximately tenfold higher than the primers with M13(‐21) sequences at lower Tm values). Moreover, AT‐rich LNA substitutions in the fluorescent primers produced much lower amplification efficiencies than GC‐rich substitutions. GC‐rich LNAs produced greater differences in Tm values among primers, and resulted in the preferential production of fluorescently labeled amplicons. The specificity and sensitivity of LNA‐containing fluorescent primers were assessed by genotyping eight STRs in Japanese individuals, and full STR profiles could be generated using as little as 0.25 ng of genomic DNA. The method permitted clear discrimination of alleles and represents sensitive STR genotyping at a reduced cost.     

Massadine,a novel geranylgeranyltransferase type I inhibitor from the marine sponge Stylissa aff. massa

Massadine, a highly oxygenated alkaloid, was isolated from the marine sponge Stylissa aff. massa as an inhibitor of geranylgeranyltransferase type I (GGTase I). The structure of massadine has been deduced from spectral data. Massidine inhibited GGTase I from Candida albicans with an IC(50) value of 3.9 microM. [structure: see text]     

Highly photoluminescent nanocrystals based on a gold(I) complex and their electrophoretic patterning

The fabrication of nanocrystals (NCs) composed of the cationic Au(I) complex was demonstrated by the reprecipitation method in which the colloidal solution of the NCs showed brilliant green phosphorescence with a quantum yield of 83% in n-hexane. Characterization of the prepared NCs was performed by transmission electron microscopy observation and elemental analysis with energy-dispersive X-ray spectroscopy. The obtained Au(I) NCs were particles of random shapes with a diameter of 200-400 nm. The selected-area electron diffraction and X-ray diffraction measurements showed the characteristic diffraction patterns attributable to the crystal structure of the bulk crystal of the Au(I) complex. A similar method was performed with a different counteranion, leading to a colloidal solution of the microcrystals (MCs) with brilliant yellow phosphorescence and a quantum yield of 26% in n-hexane. Luminescence patterning of the NCs and MCs was also achieved successfully by electrophoretic deposition onto an indium tin oxide (ITO)-coated glass substrate, resulting in characteristic luminescence patterns on the ITO substrates with relatively high photoluminescence quantum yields.