Azametallacycles from Ag(I)- or Cu(II)-promoted coupling reactions of dialkylcyanamides with oximes at Pt(II)

The dialkylcyanamide complexes cis-[PtCl(NCNR(2))(PPh(3))(2)][BF(4)] 1 and cis-[Pt(NCNR(2))(2)(PPh(3))(2)][BF(4)](2) 2 (R = Me or Et) have been prepared by treatment of a CH(2)Cl(2) solution of cis-[PtCl(2)(PPh(3))(2)] with the appropriate dialkylcyanamide and one or two equivalents of Ag[BF(4)], respectively. Compounds 2 can also be obtained from 1 by a similar procedure. Their reaction with oximes, HON=CR'R' ' (R'R' ' = Me(2) or C(4)H(8)), in CH(2)Cl(2) and in the presence of Ag[BF(4)] or Cu(CH(3)COO)(2), leads to the novel type of azametallacycles cis-[Pt(NH=C(ON=CR'R")-NR2)(PPh3)2][BF4]2 4 upon an unprecedented coupling of the organocyanamides with oximes, in a process that proceeds via the mixed oxime-organocyanamide species cis-[Pt(NCNR(2))(HON=CR'R' ')(PPh(3))(2)][BF(4)](2) 3, and is catalyzed by either Ag(+) or Cu(2+) which activate the ligating organocyanamide by Lewis acid addition to the amide group. In contrast, in the organonitrile complexes cis-[Pt(NCR)(2)(PPh(3))(2)][BF(4)](2) 5 (R = C(6)H(4)OMe-4 or Et), obtained in a similar way as 2 (but by using NCR instead of the cyanamide), the ligating NCR is not activated by the Lewis acid and does not couple with the oximes. The spectroscopic properties of those complexes are reported along with the molecular structures of 2b (R = Et), 4a1 (R = Me, R'R' ' = Me(2)), and 4b1 (R = Et, R'R' ' = Me(2)), as established by X-ray crystallography which indicates that in the former complex the amide-N-atoms are trigonal planar, whereas in the latter (4a1 and 4b1) the five-membered rings are planar with a localized N=C double bond (imine group derived from the cyanamide) and the exocyclic amide and alkylidene groups (in 4b1) are involved in two intramolecular H-bonds to the oxygen atom of the ring.     

Coherence and correlation parameters for thed 3 Π u − (v=0,1,2,3;N=1) states of H2

We have applied the density matrix formalism and the distorted-wave approximation to calculate the Stokes parameters for thed ³ Π _u ^? (v=0,1,2,3;N=1) states of H₂ excited from the X¹ ∑ _g ⁺ (v=0,N=1) state by electron impact at the incident energies ranging from 15 to 40 eV. Our results show that these parameters are nearly independent of the vibrational quantum number of the excited states. However, the polarization of the radiation emitted by the target in the subsequent decay process increases with increasing incident energies.     

Activation of the carbon—nitrogen triple bond of benzonitrile in the presence of triosmium clusters and acetic acid. Crystal structure of (μ-H)Os3(CO)10(μ-O2CCH3), a product of the reaction

The activation of the CN triple bond of benzonitrile in the presence of acetic acid and of Os₃(CO)₁₂ or H₂Os₃(CO)₁₀ has been studied. When Os₃(CO)₁₂ reacts with PhCN and acetic acid in refluxing n-octane the three main products are (μ-H)Os₃(CO)₁₀(μ-O₂CCH₃) (I), (μ-H)Os₃(CO)₁₀(μ-NCHPh) (II) and (μ-H)Os₃(CO)₁₀(μ-NHCH₂Ph) (III); II and III are analogues of (μ-H)Ru₃(CO)₁₀(μ-NCHPh) and (μ-H)Ru₃(CO)₁₀(μ-NHCH₂Ph) obtained from PhCN, Ru₃(CO)₁₂ or H₄Ru₄(CO)]₁₂, and acetic acid. In contrast to the reaction with ruthenium clusters, Os₃(CO)₁₂ and H₂Os₃(CO)₁₀ also give the adduct Os₃(CO)₁₀(CH₃COOH) (I). The structure of I has been fully elucidated by X-ray diffraction. Crystals of I are monoclinic, space group P2₁/m, with unit cell parameters a 7.858(6), b 12.542(8), c 9.867(6) Å, β 109.92(2)°, Z = 2. In I an edge of the triangular cluster of osmium atoms is doubly bridged by a hydride and an acetate ligand. Ten terminal carbonyl groups are bonded to the metal atoms.     

A comparative study for elastic electron collisions on the isoelectronic CNN, NCN, and CCO radicals

In this work, we present a theoretical study on elastic electron collisions from three isoelectronic free radicals (CNN, NCN, and CCO) in the low incident energy range. More specifically, calculated differential, integral, and momentum transfer cross sections are reported in the 1-30 eV energy range. Calculations are performed in the static-exchange and static-exchange-polarization levels. The iterative Schwinger variational method is used to solve the scattering equations. Our study reveals that the calculated cross sections for the three targets are significantly different at incident energies below 10 eV. Above that energy, a remarkable similarity among the calculated results is seen.     

Enhanced ethanol sensing properties of WO3 modified TiO2 nanorods

Pristine and WO₃ decorated TiO₂ nanorods (NRs) were synthesised to investigate n-n-type heterojunction gas sensing properties. TiO₂ NRs were fabricated via hydrothermal method on fluorine-doped tin oxide coated glass (FTO) substrates. Then, tungsten was sputtered on the TiO₂ NRs and thermally oxidised to obtain WO₃ nanoparticles. The heterostructure was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectroscopy. Fabricated sensor devices were exposed to VOCs such as toluene, xylene, acetone and ethanol, and humidity at different operation temperatures. Experimental results demonstrated that the heterostructure has better sensor response toward ethanol at 200 °C. Enhanced sensing properties are attributed to the heterojunction formation by decorating TiO₂ NRs with WO₃.     

Falling cards and flapping flags: understanding fluid–solid interactions using an unsteady point vortex model

A reduced-order model for the two-dimensional interaction of a sharp-edged solid body and a high-Reynolds number flow is presented, based on the inviscid representation of the solid’s wake as point vortices with unsteady intensity. This model is applied to the fall of a rigid card in a fluid and to the flapping instability of a flexible membrane forced by a parallel flow.     

Interpreting technical evidence from spectral imaging of paintings by Édouard Manet in the Courtauld Gallery

The paintings by Édouard Manet in The Courtauld Gallery Déjeuner sur l'herbe (1863–68), Marguerite de Conflans en Toilette de Bal (1870–1880), Banks of the Seine at Argenteuil (1874), and A Bar at the Folies–Bergère (1882) were investigated for the first time using a range of non-invasive in situ analyses. The aims of the study were to investigate the painting techniques and materials used for this group of works and to critically evaluate the technical evidence derived from the integrated use of imaging techniques and portable spectroscopic methods in this context. The paintings were investigated by means of macro X-ray fluorescence (MA-XRF), reflection spectral imaging, portable UV–Vis–NIR spectroscopy, portable Raman spectroscopy, and reflection FTIR. MA-XRF and reflection spectral imaging allowed visualising elements in the compositions that were not visible using traditional methods of technical study. For example, MA-XRF analysis of Déjeuner sur l'herbe revealed elements of the development of the composition that provided new evidence to consider its relationship to other versions of the composition. The study also highlighted questions about the interpretation of elemental distribution maps and spectral images that did not correspond to the reworking visible in X-radiographs. For example, in A Bar at the Folies–Bergère Manet made numerous changes during painting, which were not clearly visualised with any of the techniques used. The research has wider implications for the study of Impressionist paintings, as the results will support technical studies of works by other artists of the period who used similar materials and painting methods.     

Synergism between flame retardant and modified layered silicate on thermal stability and fire behaviour of polyurethane nanocomposite foams

Synergy in flame retardancy of polyurethane foams between phosphorus-based flame retardant (aluminium phosphinate) and layered silicates has been investigated. We used pristine montmorillonite as well as ammonium modified clay (commercially available) and diphosphonium modified clay, which were synthesised by the intercalation of the quaternary diphosphonium salt according to a procedure reported here. The morphology of the foams was characterised through X-ray diffraction (XRD), while thermal properties were characterised by oxygen index test, cone calorimeter and thermogravimetric analysis (TGA). The morphological characterisation showed that pristine and diphosphonium modified clays are almost slightly intercalated, while ammonium modified one is very well dispersed. The results of thermal characterisation showed that in the presence of phosphinate enhancements of oxygen index, fire behaviour, measured by cone calorimeter, and thermal stability have been achieved. Phosphinate is therefore an efficient flame retardant for polyurethane foams and its flame retardancy action takes place in both condensed and gas phases. Pristine and ammonium modified layered silicate bring some enhancements of thermal stability while having no important effect in decreasing peak heat release rate (PHRR) and total heat evolved (THE) when used in conjunction with phosphinate; their main advantage is related to the enhancement of compactness of the char layer formed. Diphosphonium clay is instead effective in further improving the fire behaviour of the foams because of the flame retardancy action of phosphonium: both PHRR and THE were decreased. The analysis of cone calorimeter data showed that clays act through physical effect constituting a barrier at the surface which is effective in preventing or slowing the diffusion of volatiles and oxygen, while phosphinate and phosphonium are more effective owing to their combined action in both condensed and gas phases.