Characterization of iron surface modified by 2-mercaptobenzothiazole self-assembled monolayers

A self-assembled monolayer of 2-mercaptobenzothiazole (MBT) adsorbed on the iron surface was prepared. The films were characterized by electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared reflection spectroscopy (FT-IR) and scanning electron microscopy (SEM). Besides, the microcalorimetry method was utilized to study the self-assembled process on iron surface and the adsorption mechanism was discussed from the power-time curve. The results indicated that MBT was able to form a film spontaneously on iron surface and the presence of it could protect iron from corrosion effectively. However, the assembling time and the concentration influence the protection efficiency. Quantum chemical calculations, according to which adsorption mechanism was discussed, could explain the experimental results to some extent.     

小间隙高放大多丝室及其放电机制

对以强猝灭气体工作的小间隙多丝室及其放电机制进行了研究,实验表明,因为工作在饱和模式区,这种室同时具有很高的气体放大和相当快的时间特性.文中探讨了放电机制,雪崩中空间电荷效应以及电离光子的产生和作用是重要的因素,而其中后一因素又受到强猝灭气体的抑制.     

微型圆光栅刻划偏心量的控制

对微型圆光栅刻划偏心误差问题进行了讨论。提出了微型圆光栅刻划时偏心调试误差的公差范围。     

高温超导体制备条件的人工神经网络识别

高温超导体的制备条件要求严格,其掺杂量大小、烧结温度控制等都直接影响实验样本的超导性质。近几年高温超导研究已积累大量实验数据,如何应用人工智能方法处理这些数据寻找更好的合成条件颇有意义。人工神经网络方法在许多领域己显示其处理复杂数据和模式识别的优越性,但尚未应用到化合物制备研究方面。本文对此作了初步尝试。     

Determination of the reaction heat and studies of thermodynamic functions

The hydrolytic polymerization of Cr³⁺ at relatively high concentrations was studied by microcalorimetry. The thermal curves were determined with a 2277 thermal activity monitor. From the curves, the identified reaction heats (δrH _m ^σ ), hydrolysis constants (K) and thermodynamic functions (δrS _m ^σ ,δrH _m ^σ ) were calculated at different temperatures.     

Direct determination of sulfite in food samples by a biosensor based on plant tissue homogenate

In the work described here, a biosensor was developed for the determination of sulfite in food. Malva vulgaris tissue homogenate containing sulfite oxidase enzyme was used as the biological material. M. vulgaris tissue homogenate was crosslinked with gelatin using glutaraldehyde and fixed on a pretreated Teflon membrane. Sulfite was enzymatically converted to sulfate in the presence of the dissolved oxygen, which was monitored amperometrically. Sulfite determination was carried out by standard curves, which were obtained by the measurement of consumed oxygen level related to sulfite concentration. Several operational parameters had been investigated: the amounts of plant tissue homogenate and gelatin, percentage of glutaraldehyde, optimum pH and temperature. Also, some characterization studies were done. There was linearity in the range between 0.2 and 1.8 mM at 35 °C and pH 7.5. The results of real sample analysis obtained with the biosensor agreed well with the enzymatic reference method using spectrophotometric detection.     

铝酸钠溶液的紫外吸收峰

分别用量子化学MNDO和DV-X_α方法计算了二聚铝酸离子[Al_2O(OH)_6]~(2-)和Al(OH)_4~-。结果表明前者旋转势垒很低, 只有10.08 kJ·mol~(-1), 最稳定平衡构型为C_s。用X_α过渡态理论计算获得这两个离子紫外吸收峰的理论值分别为266.6 nm和234.4 nm, 与实验值270.0 nm和230.0 nm相当接近。因此可以认为, 紫外吸收峰270.0 nm和230.0 nm分别为[Al_2O(OH)_6]~(2-)和Al(OH)_4~-离子的最高占有轨道电子向最低空轨道跃迁时产生的吸收峰。计算结果支持铝酸钠溶液中存在二聚铝酸离子的观点。     

Syntheses of (±)-17α- and (±)-17β-hydroxytacamonine; determination of configuration at C-17

Both (±)-17α-hydroxytacamonine (3) and its 17β-isomer (4) were synthesized in two steps (one-pot) from aldehyde mixture 5/6 via the cyanohydrin reaction. NMR spectral characterization of isomer 3 revealed it to be unidentical with natural 17-hydroxytacamonine, whereas spectral data of isomer 4 were in agreement with those published for the natural isomer. The configuration at C-17 was confirmed by NOE difference spectroscopy.