Altered expression of polyhydroxyalkanoate synthase gene and its effect on poly[(R)-3-hydroxybutyrate] synthesis in recombinant Escherichia coli

Polyhydroxyalkanoate (PHA) synthase (PhaC) from Wautersia eutropha was expressed in a wide range of production level in Escherichia coli XL1-Blue cells and its effects on PhaC activity, poly[(R)-3-hydroxybutyrate] [P(3HB)] production and its molecular weights were investigated. The production level of PhaC was controlled both by the amount of chemical inducer (isopropyl-β-d-thiogalactopyranoside, IPTG) added into the medium and the use of different copy number of plasmids. In a flask experiment, as PhaC production level in the cells increased, the PhaC activity also increased in the range of low PhaC concentration. However, PhaC activity did not further increase in the range of high PhaC concentration, probably due to the formation of inclusion body in the cells. The molecular weight of P(3HB) was found to decrease with increasing PhaC activity. This trend was also verified in high cell density cultivation using 10-l jar fermentor. Furthermore, we demonstrated that the use of low copy number plasmid and appropriate induction of PhaC expression were effective in achieving both high productivity and high molecular weight of P(3HB).     

Rapid and sensitive determination of the conversion of UV-cured acrylic ester resins by pyrolysis-gas chromatography in the presence of an organic alkali.

The double-bond conversion of UV-cured resins prepared from pentaerythritol triacrylate (PETA) was determined by pyrolysis-gas chromatography in the presence of an organic alkali, tetramethylammonium hydroxide (TMAH). The pyrogram of the uncured prepolymer compound, consisting of PETA and a photoinitiator, 2,2-dimethoxy-2-phenylacetophenone, contained specific products reflecting the original acrylate structure, such as methyl acrylate (MA) and methyl ethers of pentaerithritol. Meanwhile, in pyrograms of the UV-cured PETA, the yields of MA considerably decreased. The double-bond conversions of the cured resins, irradiated with various UV dosages, were calculated based on the relative yields of MA among specific products in the pyrograms. The conversions determined by this approach were analyzed by comparing them with those estimated by Fourier-transform infrared spectroscopy.     

Enhancement of Magneto-Optic Effect in Optical Isolator with Semiconductor Guiding Layer by Selective Oxidation of AlInAs

Selective oxidation of an AlInAs layer was investigated for enhancement of magneto-optic effect in an optical isolator. Twelve times nonreciprocal phase shift enhancement was estimated from a measured AlInAs-oxide refractive index.     

Optical current transducer with bulk type Bi12SiO20 faraday sensor for power systems

Two types of optical current transducers (OCTs) have a bulk Faraday sensor inserted into the gap of an iron core and a porcelain insulator with optical fiber. The sensor consists of Bi₁₂SiO₂₀ (BSO) single crystal, a polarizer, and an analyzer. The OCTs satisfied the target performance requirement for fault location and metering and demonstrated maintained performance at some power utilities in Japan and the US. We have developed a fault location system that immediately detects the fault current with the OCTs, there by locating the fault section. The OCT can easily replace the existing support insulators for the disconnecting switch without any modifications to structure height or bus-bar. For metering requiring 0.3% class accuracy, use of a BSO with right optical rotatory power combined with BSO with left optical rotatory power results in a Faraday sensor with improved temperature characteristics. The OCT demonstrated 0.3% class accuracy for metering described in the current transformer Specifications of IEEE C57–13, 1993.     

Electron spin resonance studies of plasma-induced polystyrene radicals

Plasma-induced polystyrene radicals were first studied by electron spin resonance (ESR). The room temperature ESR spectrum was compared with those obtained by γ-irradiation, UV-irradiation, and mechanical fracture. It was found that even less than a few seconds of plasma-irradiation gave rise to a large amount of polystyrene radicals and the ESR spectrum consisted of two types of spectra, a triplet and a single broad line. The spectral feature of the triplet was nearly identical with that of γ-irradiated polystyrene. Thus, it was assigned to the structure of a cyclohexadienyl-type radical formed by a nearly random addition of a hydrogen atom to the aromatic ring. The single broad line, thought to be an outline of multicomponent spectrum, was assigned to an immobilized dangling-bond sites at the plasma-induced crosslinked portion of the polystyrene surface.     

Numerical analysis of finite amplitude motion of waves and a moored floating body under severe storm conditions

The motion of a moored floating body under the action of wave forces, which is influenced by fluid forces, shape of the floating body and mooring forces, should be analysed as a complex coupled motion system. Especially under severe storm conditions or resonant motion of the floating body it is necessary to consider finite amplitude motions of the waves, the floating body and the mooring lines as well as non-linear interactions of these finite amplitude motions. The problem of a floating body has been studied on the basis of linear wave theory by many researchers. However, the finite amplitude motion under a correlated motion system has rarely been taken into account. This paper presents a numerical method for calculating the finite amplitude motion when a floating body is moored by non-linear mooring lines such as chains and cables under severe storm conditions.     

Influence of Zn Diffusion on Bandwidth and Extinction in MQW Electroabsorption Modulators Buried with Semi-Insulating InP

A comprehensive analysis of multi-quantum-well electroabsorption modulators buried with semi-insulating (SI)-InP is presented. We quantitatively demonstrate that suppression of Zn diffusion into the burying and optical core layers plays a key role in high-speed and high-extinction operation.     

Side‐chain crystallization behavior of graft copolymers consisting of an amorphous main chain and crystalline side chains. II. Poly(n‐hexyl methacrylate)‐graft‐poly(ethylene glycol)

The phase behavior and crystallization of graft copolymers consisting of poly(n‐hexyl methacrylate) (PHMA) as an amorphous main chain and poly(ethylene glycol) (PEG) as crystallizable side chains (HMAx with 15 ≤ x ≤ 73, where x represents the weight percentage of PEG) were investigated. Small‐angle X‐ray scattering profiles measured above the melting temperature of PEG suggested that a microdomain structure with segregated PHMA and PEG domains was formed in HMA40 and HMA46. This phase behavior was qualitatively described by a calculated phase diagram based on the mean‐field theory. Because of the segregation of PEG into microdomains, the crystallization temperature of the PEG side chains in HMAx was higher than that in poly(methyl acrylate)‐graft‐poly(ethylene glycol) having a similar value of x, which was considered to be in a disordered state above the melting temperature. In HMAx with x ≤ 40, PEG crystallization was strongly restricted, probably because the PEG microdomains were isolated in the PHMA matrix. As a result, the growth of PEG spherulite was not observed because the PEG crystallization occurred after vitrification of the PHMA segregated domains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 129–137, 2007     

Synthesis of silicon nitride based ceramic nanoparticles by the pyrolysis of silazane block copolymer micelles

Diblock copolymer poly(1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane)‐block‐polystyrene (polyVSA‐b‐polySt) and triblock copolymer poly(1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane)‐block‐polystyrene‐block‐poly(1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane) (polyVSA‐b‐polySt‐b‐polyVSA), consisting of silazane and nonsilazane segments, were prepared by the living anionic polymerization of 1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane and styrene. PolyVSA‐b‐polySt formed micelles having a poly(1,1,3,N,N′‐pentamethyl‐3‐vinylcyclodisilazane) (polyVSA) core in N,N‐dimethylformamide, whereas polyVSA‐b‐polySt and polyVSA‐b‐polySt‐b‐polyVSA formed micelles having a polyVSA shell in n‐heptane. The micelles with a polyVSA core were core‐crosslinked by UV irradiation in the presence of diethoxyacetophenone as a photosensitizer, and the micelles with a polyVSA shell were shell‐crosslinked by UV irradiation in the presence of diethoxyacetophenone and 1,6‐hexanedithiol. These crosslinked micelles were pyrolyzed at 600 °C in N₂ to give spherical ceramic particles. The pyrolysis process was examined by thermogravimetry and thermogravimetry/mass spectrometry. The morphologies of the particles were analyzed by atomic force microscopy and transmission electron microscopy. The chemical composition of the pyrolysis products was analyzed by X‐ray fluorescence spectroscopy and Raman scattering spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4696–4707, 2006