Solid state NMR characterization of formation of poly(ϵ‐caprolactone)/maghnite nanocomposites by in situ polymerization

Results of multinuclear MAS NMR spectroscopy are reported for poly (ε‐caprolactone)/maghnite nanocomposite formation, with ε‐caprolactone in situ polymerized in the presence of maghnite, a proton exchanged montmorillonite clay. Exfoliated and intercalated materials with different maghnite loading in the range 3–15 wt % were investigated. ¹H NMR evidences Brønsted acid hydroxyl groups in the silicate layers and shows that their broad signal at 7.6 ppm present in the parent clay disappears in the nanocomposite material. ²⁷Al MAS NMR results show that beside the hexacoordinated aluminum signal, two additional peaks corresponding to two different tetrahedral Al sites are present in the clay framework. The NMR signal intensity of only one of them was found to be affected in the nanocomposites compared with the parent maghnite, suggesting that these specific aluminum sites are the reactive ones at the initial stages of the polymerization. However almost no changes occurred in the ²⁹Si NMR spectra, confirming that the polymer grafting, as indicated earlier by atomic force microscopy, took place on the aluminum tetracoordinated sites rather than on the silicon sites. A mechanism of maghnite surface catalyzed polymerization of ε‐caprolactone was proposed, involving Brønsted and Lewis acid sites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3060–3068, 2007     

Improved Synthesis,Structure, and Solution Characterization of the Cyclic 48-Tungsto-8-Arsenate(V), [H4As8W48O184]36−

We report on an improved synthesis and structural characterization of the cyclic 48-tungsto–8-arsenate(V) [H₄As₈W₄₈O₁₈₄]^36? (1). The mixed lithium–potassium salt of this polyanion, K_26.5Li_9.5[H₄As₈W₄₈O₁₈₄]·90H₂O (KLi-1), has been studied in the solid state by IR, single-crystal X-ray diffraction, and elemental analysis, and in solution by ¹⁸³W NMR spectroscopy.     

Facile preparation of 3-substituted 2-quinazolinones via electrogenerated base

A new series of 3,4-disubstituted quinazolin-2-ones, with potential T-type calcium channel antagonist activity, and new 4-methylene-quinazolin-2-ones, promising catalysts as N-heterocyclic olefins, have been prepared in good yield by a simple reaction between 2-aminobenzophenone, or 2-aminoacetophenone, and cyanomethyl anion electrogenerated by acetonitrile reduction at a graphite electrode, followed by the addition of different organic isocyanates and subsequent heterocyclization.     

Investigation of the Mechanism of Colloidal Silicalite‐1 Crystallization by Using DLS,SAXS, and 29Si NMR Spectroscopy

Colloidal silicalite‐1 zeolite was crystallized from a concentrated clear sol prepared from tetraethylorthosilicate (TEOS) and aqueous tetrapropylammonium hydroxide (TPAOH) solution at 95 °C. The silicate speciation was monitored by using dynamic light scattering (DLS), synchrotron small‐angle X‐ray scattering (SAXS), and quantitative liquid‐state ²⁹Si NMR spectroscopy. The silicon atoms were present in dissolved oligomers, two discrete nanoparticle populations approximately 2 and 6 nm in size, and crystals. On the basis of new insight into the evolution of the different nanoparticle populations and of the silicate connectivity in the nanoparticles, a refined crystallization mechanism was derived. Upon combining the reagents, different types of nanoparticles (ca. 2 nm) are formed. A fraction of these nanoparticles with the least condensed silicate structure does not participate in the crystallization process. After completion of the crystallization, they represent the residual silicon atoms. Nanoparticles with a more condensed silicate network grow until approximately 6 nm and evolve into building blocks for nucleation and growth of the silicalite‐1 crystals. The silicate network connectivity of nanoparticles suitable for nucleation and growth increasingly resembles that of the final zeolite. This new insight into the two classes of nanoparticles will be useful to tune the syntheses of silicalite‐1 for maximum yield.     

Selective conversion of {Mo132} Keplerate ion into 4-electron reduced crown-capped Keggin derivative [Te5Mo15O57](8-). A key intermediate to single-phase M1 multielement MoVTeO light-alkanes oxidation catalyst

{Mo(132)} Keplerate anion reacts with tellurites to give a soluble precursor to produce in hydrothermal conditions single-phase M1 MoVTeO light-alkanes oxidation catalyst. Characterization of this Te-containing intermediate by single-crystal X-ray diffraction, (125)Te NMR, UV-visible and redox titration reveals a molybdotellurite anion as a crown-capped Keggin derivative.     

Clustering Six Electrons within “Dawson-Like” Polyoxometalate: An Open Route toward Its Post-functionalization

Super-reduction of polyoxometalates (POMs) in solution is of fundamental interest for designing innovative energy storage systems. In this article, we show that the “Dawson-like” POM can undergo a disproportionation process during its massive electron uptake, leading to species containing three metal-metal bonds as evidenced by X-ray diffraction, multi-nuclear magnetic resonance spectroscopy (¹H and ¹⁸³W NMR), extended X-ray absorption fine structure (EXAFS), UV/Vis, and voltammetry techniques. This result indicates that electron storing within metal-metal bonds is not a unique property of Keggin-type POM as postulated since the 70s. Besides, we demonstrate that the presence of an electron-rich triad in the “Dawson-like” POM allows its post-functionalization with additional tungstate ions, generating a chiral molecule that is also the largest W^IV-containing POMs known to date.     

EGB-promoted electrochemical synthesis of 6-thioxo-[1,3,5]-triazinane-2,4 dione derivatives

A simple method for the synthesis of 6-thioxo-[1,3,5]-triazinane-2,4-dione derivatives was reported. The electrogenerated cyanomethyl base obtained from electroreduction of neat acetonitrile assisted the reaction between thiourea derivatives and alkyl or aryl isocyanate. This protocol had the advantage of giving good yields using mild conditions. The obtained products have been identified by spectroscopic data, mass spectrometry, and high-resolution mass spectra or elemental analysis.     

MIL-96, a porous aluminum trimesate 3D structure constructed from a hexagonal network of 18-membered rings and mu3-oxo-centered trinuclear units

A new aluminum trimesate Al12O(OH)18(H2O)3(Al2(OH)4)[btc]6.24H2O, denominated MIL-96, was synthesized under mild hydrothermal conditions (210 degrees C, 24 h) in the presence of 1,3,5-benzenetricarboxylic acid (trimesic acid or H3btc) in water. Hexagonal crystals, allowing a single-crystal XRD analysis, are grown from a mixture of trimethyl 1,3,5-benzenetricarboxylate (Me3btc), HF, and TEOS. The MIL-96 structure exhibits a three-dimensional (3D) framework containing isolated trinuclear mu3-oxo-bridged aluminum clusters and infinite chains of AlO4(OH)2 and AlO2(OH)4 octahedra forming a honeycomb lattice based on 18-membered rings. The two types of aluminum groups are connected to each other through the trimesate species, which induce corrugated chains of aluminum octahedra, linked via mu2-hydroxo bonds with the specific -cis-cis-trans- sequence. The 3D framework of MIL-96 reveals three types of cages. Two of them, centered at the special positions 0 0 0 and 2/3 1/3 1/4, have estimated pore volumes of 417 and 635 A3, respectively, and encapsulate free water molecules. The third one has a smaller pore volume and contains disordered aluminum octahedral species (Al(OH)6). The solid-state NMR characterization is consistent with crystal structure and elemental and thermal analyses. The four aluminum crystallographic sites are resolved by means of 27Al 3QMAS technique. This product is able to sorb both carbon dioxide and methane at room temperature (4.4 mmol.g(-1) for CO2 and 1.95 mmol.g(-1) for CH4 at 10 bar) and hydrogen at 77 K (1.91 wt % under 3 bar).     

Supramolecular Association between γ-Cyclodextrin and Preyssler-Type Polyoxotungstate

The development of hybrid materials based on polyoxometalates constitutes a strategy for the design of multifunctional materials. The slow evaporation of an aqueous solution of [NaP₅W₃₀O₁₁₀]¹⁴⁻ in the presence of γ-Cyclodextrin (γ-CD) led to the crystallization of a K₆Na₈{[NaP₅W₃₀O₁₁₀]•(C₄₈H₈₀O₄₀)}•23H₂O (NaP₅W₃₀•1CD) supramolecular compound, which was characterized by single-crystal X-ray diffraction, IR-spectroscopy, thermogravimetric and elemental analyses. Structural analysis revealed the formation of 1:1 {[NaP₅W₃₀O₁₁₀]•[γ-CD]}¹⁴⁻ adduct in the solid state. Studies in solution by cyclic voltammetry, electrochemical impedance spectroscopy, ¹H NMR spectroscopy, and ³¹P DOSY, have demonstrated weak interactions between the inorganic anion and the macrocyclic organic molecule.