玻色—爱因斯坦凝聚和兰姆位移

扼要地介绍了ＢＥＣ研究的近况和研究方向，同时报道了我们在ＢＥＣ的光散射和兰姆位移方面的研究工作     

简易型离子选择电极-流动注射分析仪的研制及卤水中氯、溴和碘的连续测定

本文设计研制了简单实用的流通池,组装了简易型离子选择电极—流动注射分析仪,对体系的分析特点和影响因素进行了考察。此装置性能可靠,能满足简单流注分析的需要,并建立了卤水中Cl~-、Br~-和I~-的连续测定方法。     

流动注射电位滴定研究：氟化物沉淀滴定测锂

设计制作了一种简便的梯度混合室,并考察了其性能,试验结果证实了此混合室的合理性和有效性.用此混合室建立了流动注射电位滴定测锂的新方法,载流为1×10~(-5)～1×10~(-4)mol·L~(-1)的F~乙醇-水(9 1)溶液,流速4.2ml·min~(-1),混合室体积400μl,进样体积120μl,分析速度60样·h~(-1),检出范围取决于载流中滴定剂的浓度,方法用于卤水中锂的测定,结果令人满意.     

Quantitative analysis of asymmetrical cortical activity in motor areas during sequential finger movement

Brain asymmetry is a phenomenon well known for handedness and has been studied in motor cortices. However, few quantitative studies on asymmetrical cortical activity in motor areas have been conducted. In this study, we systematically investigated asymmetrical cortical activity in motor areas during sequential finger movement by quantitatively analyzing functional magnetic resonance imaging (fMRI) blood oxygenation level-dependent (BOLD) responses. The norm of BOLD signal percentage of change was introduced to quantitatively measure the BOLD signal intensity change difference between the left and right motor areas. The results of the data collected from six subjects show that the norm of BOLD signal percentage of change in the right motor area is higher than that in the left motor area for two-hand movement (P=.0059) and single-hand movement (P=.0279) with right-handedness. These results from fMRI show the asymmetry of motor areas and may suggest that the left hemisphere motor area comes into being as an adaptation system that needs few neuron cells only to finish any movement task for right-handedness. The activation intensity in the left motor area is reduced with normal right finger movement. The activation intensity in the right motor area is obviously higher than that in the left motor area.     

Significance of Branching for Transfection: Synthesis of Highly Branched Degradable Functional Poly(dimethylaminoethyl methacrylate) by Vinyl Oligomer Combination

A series of degradable branched PDMAEMA copolymers were investigated with the linear PDMAEMA counterpart as gene‐delivery vectors. The branched PDMAEMA copolymers were synthesized by controlled radical cross‐linking copolymerization based on the “vinyl oligomer combination” approach. Efficient degradation properties were observed for all of the copolymers. The degree of branching was found to have a big impact on performance in transfection when tested on different cell types. The product with the highest degree of branching and highest degree of functionality had a superior transfection profile in terms of both transfection capability and the preservation of cell viability. These branched PDMAEMA copolymers show high potential for gene‐delivery applications through a combination of the simplicity of their synthesis, their low toxicity, and their high performance.     

Model filled polymers. XI. Synthesis of monodisperse crosslinked polymethacrylonitrile beads

Monodisperse polymethacrylonitrile beads of varied size and crosslink density are prepared by emulsion copolymerization of methacrylonitrile and allylmethacrylate in the absence of emulsifier. The particle size is very sensitive to polymerization temperature and initiator concentration. Because of a nitrile group effect, the maximum conversion varies with reaction conditions. The highest conversion obtained was 82%. © 1992 John Wiley & Sons, Inc.     

Fabrication and performance of microencapsulated phase change materials with hybrid shell by in situ polymerization in Pickering emulsion

Microencapsulated phase change materials (MePCMs) using melamine–formaldehyde resin/SiO₂ as shell were investigated in this paper. Organically modified SiO₂ particles were employed to stabilize Pickering emulsion, and in situ polymerization of melamine and formaldehyde was carried out to form hybrid shell. The performances of resultant MePCMs with hybrid shell were investigated comparatively with the MePCMs with polymer shell. SiO₂ particles raise the microencapsulation efficiency by improving the stability of emulsion and providing a precipitation site for melamine–formaldehyde resin. Also, the mechanical strength, thermal reliability, and anti‐osmosis performance of MePCMs were improved significantly by SiO₂ particles in the shell. Our study shows that Pickering emulsion is a simple and robust template for MePCMs with polymer‐inorganic hybrid shell. Copyright © 2015 John Wiley & Sons, Ltd.     

氢化物—石墨炉原位富集原子吸收光谱法测定痕量锑

本文对标示问题进行了研究，自行设计了氢化物发生器，采用以石墨炉两端输入氢化物方式，载气流向用活塞控制，大幅度减少原子化阶段石墨炉内氢气分压，提高了锑的灵敏度，对氢化锑的石墨炉表面分解沉积和原子化机理进行了讨论，方法有于矿泉水和自来水痕量锑的测定，结果令人满意，锑的特征浓度为３０ｐｇ／０．００４４Ａ。     

氨的有效能表

本文根据近年来在能源研究中广为重视的有效能概念和有效能分析法,对化工生产和制冷工程上广泛应用的氨饱和液、饱和蒸汽与过热蒸汽在工程范围内的有效能值进行了计算,给出了在环境温度分别为0℃与25℃下的有效能表。本表不仅使用简便,而且有相当的精度,在节能管理中有实用价值。