The effect of the hydration degree on the hydrothermal and thermo-oxidative stability of some collageneous matrices

The methods of the thermal analysis (TG, DTG and DTA) were used in order to investigate the effect of the hydration degree on the thermal behaviour of some collageneous matrices. It was pointed out that the degradation of hydrated collagen in the temperature range 20-400°C occurs through two successive processes accompanied by mass losses. The first process, consisting in the collagen dehydration, is endothermic and takes place in the temperature range ≈25 - ≈125°C. The second process is exothermic and consists in the decomposition and/or thermo-oxidation of dry collagen. The thermal parameters of both processes depend on the hydration degree of collagen. The observed dependencies show that the hydrothermal and thermo-oxidative stability of collagen are strongly correlated with its water content. This revised version was published online in July 2006 with corrections to the Cover Date.     

Biosensors designed for environmental and food quality control based on screen-printed graphite electrodes with different configurations

Graphite electrodes fabricated by screen-printing have been used as amperometric detectors in biosensors based on NAD(+)-dependent dehydrogenases, tyrosinase, or genetically modified acetylcholinesterases. The mono-enzyme sensors have been optimized as disposable or reusable devices for detection of a variety of substrates important in the food industry ( D-lactic acid, L-lactic acid, acetaldehyde) or in environmental pollution control (phenols and dithiocarbamate, carbamate and organophosphorus pesticides). The sensors were prepared in four configurations differing in enzyme confinement, enzyme immobilization and location of the immobilization agent in the biosensor assembly. Tests on real samples have been performed with the biosensors; D-lactic acid and acetaldehyde have been detected in wine and phenols in air.     

A Class of Non-associated Materials: n-Monotone Materials—Hooke’s Law of Elasticity Revisited

Generalized Standard Materials are governed by maximal cyclically monotone operators and modeled by convex potentials. Géry de Saxcé’s Implicit Standard Materials are modeled by biconvex bipotentials. We analyze the intermediate class of n-monotone materials governed by maximal n-monotone operators and modeled by Fitzpatrick’s functions. Revisiting the model of elastic materials initiated by Robert Hooke, and insisting on the linearity, coaxiality and monotonicity properties of the constitutive law, we illustrate that Fitzpatrick’s representation of n-monotone operators coming from convex analysis provides a constructive method to discover the best bipotential modeling a n-monotone material. Giving up the symmetry of the linear constitutive laws, we find out that n-monotonicity is a relevant criterion for the materials characterization and classification.     

Mesoporous carbon supported ultrasmall palladium particles as highly active catalyst for Suzuki‐Miyaura reaction

A fast and efficient eco‐friendly two‐step preparation of a palladium‐containing mesoporous carbon catalyst ( C1 ) from green and readily available carbon precursors (phloroglucinol and glyoxal), a porogen template (pluronic F‐127) and PdCl₂ is described. Catalyst C1 contains ultra‐small Pd nanoparticles (1.2 nm) uniformly dispersed in the carbon network and shows an outstanding activity for Suzuki‐Miyaura reactions in pure water: extremely low amounts of palladium (10 μequiv. in most cases) are sufficient to afford almost palladium‐free products (containing <0.25 ppm of precious metal without further purification steps).     

In-syringe magnetic-stirring-assisted liquid–liquid microextraction for the spectrophotometric determination of Cr(VI) in waters

A fully automated method for the determination of chromate is described. It is based on the selective reaction of Cr(VI) with diphenylcarbazide in acidic media to form a colored complex of Cr(III) with the oxidation product diphenylcarbazone. The reaction was performed within the syringe of an automatic burette containing a magnetic stirrer for homogenization of the sample and the required reagents. In-syringe stirring was made possible using a specially designed driving device placed around the syringe barrel to achieve a rotating magnetic field in the syringe, forcing the stirrer to spin. In a second step, the reaction mixture in the syringe was neutralized to allow in-syringe magnetic-stirring-assisted dispersive liquid–liquid microextraction of the complex into 125 μL of n-hexanol. After phase separation by droplet flotation over 30 s, the organic phase was propelled into a coupled spectrophotometric detection cell. The entire multistep procedure including in-system standard preparation was done within 270 s. The method was used for the analysis of natural waters, achieving average analyte recovery of 103 %, a limit of detection of 0.26 μg L^-1, and a repeatability of less than 4 % relative standard deviation.     

Gold layers on untreated and plasma-treated substrates of quaternized polysulfones

Thin gold layers were sputtered on the quaternized polysulfones (containing different tertiary amines—N,N-dimethylethylamine and N,N-dimethyloctylamine, respectively) surfaces unmodified and modified by low-pressure and high-frequency plasma treatment. Adhesion and morphological aspects of complex structures were studied for different gold sputtering and plasma treatment times. Water contact angle, atomic force microscopy, and surface properties reveal that adhesion increases with gold sputtering and plasma treatment times. Values of the mean adhesion force between cantilever and the studied surfaces, measured from AFM investigation, were correlated with quaternized polysulfone structures, modification of hydrophobicity after plasma treatment, and gold deposition on polymer surfaces.     

Potential for the use of ultrasound in the extraction of antioxidants from Rosmarinus officinalis for the food and pharmaceutical industry

Ultrasound was used to increase the extraction efficiency of carnosic acid from the herb Rosmarinus officinalis using butanone, ethyl acetate and ethanol as solvents. Both dried and fresh leaves of the herb were extracted and, when performed at the same temperature, sonication improved the yields of carnosic acid for all three solvents and shortened the extraction times. Sonication also reduced the solvent effect so that ethanol, which is a poor solvent under conventional conditions, reached a similar level of extraction efficiency to the other two when sonicated. The extraction of dried herb with ethanol proved to be more efficient than that of fresh material, probably due to the water present in the latter.     

Assay of free captopril in human plasma as monobromobimane derivative,using RPLC/(+)ESI/MS/MS: validation aspects and bioequivalence evaluation

A sensitive method for determination of free captopril as monobromobimane derivative in plasma samples is discussed. The internal standard (IS) was 5‐methoxy‐1H‐benzimidazole‐2‐thiol. Derivatization with monobromobimane immediately after blood collection and plasma preparation prevents oxidation of captopril to the corresponding disulfide compound and enhances the ionization yield. Consequently, derivatization enhances sample stability and detection sensitivity. Addition of the internal standard was made immediately after plasma preparation. The internal standard was also derivatized by monobromobimane, as it contains a thiol functional group. Preparation of plasma samples containing captopril and IS derivatives was based upon protein precipitation through addition of acetonitrile, in a volumetric ratio 1:2. The reversed‐phase liquid chromatographic separation was achieved on a rapid resolution cartridge Zorbax SB‐C₁₈, monitored through positive electrospray ionization and tandem MS detection using the multiple‐reaction monitoring mode. Transitions were 408–362 amu for the captopril derivative and 371–260 amu for the internal standard derivative. The kinetics of captopril oxidation to the corresponding disulfide compound in plasma matrix was also studied using the proposed method. A linear log–log calibration was obtained over the concentration interval 2.5–750 ng/mL. A low limit of quantitation in the 2.5 ng/mL range was obtained. The analytical method was fully validated and successfully applied in a three‐way, three‐period, single‐dose (50 mg), block‐randomized bioequivalence study for two pharmaceutical formulations (captopril LPH 25 and 50 mg) against the comparator Capoten 50 mg. Copyright © 2009 John Wiley & Sons, Ltd.     

Influence of surface chemistry on the adsorption of oxygenated hydrocarbons on activated carbons

The objective of this work was to study the adsorption of different oxygenated hydrocarbons (methanol, ethanol, 1 and 2-butanol, methyl acetate) on activated carbons from organic mixtures with cyclohexane. Three activated carbons prepared by thermal and chemical treatments of a commercial carbon were employed for this purpose. Their textural properties were found to be similar, whereas their surface chemistries were modified, as shown by temperature-programmed desorption coupled to mass spectrometry (TPD-MS) and X-ray photoelectron spectroscopy (XPS). The adsorption isotherms were obtained by depletion method, and the analysis of adsorbed species was evaluated by TPD-MS to obtain new insight into the interactions between the different hydrocarbons and the carbon surface. Ethanol leads to a high-energy interaction between its hydroxyl function and the oxygenated surface groups and also to a lower energy interaction between the aliphatic part of the molecule and the carbon material. The desorption activation energy for this hydrophilic interaction is high (50 to 105 kJ/mol), and it is related to the nature of the carbon surface groups. The relative importance of these two interactions depend on the size of the alcohol/methanol is similar to ethanol, whereas butanols lead to more dispersive interactions. Methyl-acetate cannot undergo this kind of strong interaction and behaves like cyclohexane, having desorption activation energies ranging between 25 and 45 kJ/mol no matter the molecule and the carbon surface chemistry.