Anisotropic Elastic-Viscoplastic Properties at Finite Strains of Injection-Moulded Low-Density Polyethylene

Injection-moulding is one of the most common manufacturing processes used for polymers. In many applications, the mechanical properties of the product is of great importance. Injection-moulding of thin-walled polymer products tends to leave the polymer structure in a state where the mechanical properties are anisotropic, due to alignment of polymer chains along the melt flow direction. The anisotropic elastic-viscoplastic properties of low-density polyethylene, that has undergone an injection-moulding process, are therefore examined in the present work. Test specimens were punched out from injection-moulded plates and tested in uniaxial tension. Three in-plane material directions were investigated. Because of the small thickness of the plates, only the in-plane properties could be determined. Tensile tests with both monotonic and cyclic loading were performed, and the local strains on the surface of the test specimens were measured using image analysis. True stress vs. true strain diagrams were constructed, and the material response was evaluated using an elastic-viscoplasticity law. The components of the anisotropic compliance matrix were determined together with the direction-specific plastic hardening parameters.     

The π N → e +e−N reaction close to the vector-meson production threshold

The π^? p→e ⁺ e ^? n and π⁺ n→e ⁺ e ^? p reaction cross sections are calculated below and in the vicinity of the vector-meson (?⁰,ω) production threshold. These processes are largely responsible for the emission of e ⁺e^? pairs in pion-nucleus reactions and contribute to the dilepton spectra observed in relativistic heavy ion collisions. They are dominated by the decay of low-lying baryon resonances into vector-meson-nucleon channels. The vector mesons materialize subsequently into e ⁺ e^? pairs. Using πN→?⁰ N and πN→ωN, amplitudes calculated in the center of mass energy interval 1.4 < √s<1.8 GeV, we compute the π^? p→e ⁺ e ^? n and π⁺ n→e ⁺ e ^? p reaction cross sections in these kinematics. Below the vector-meson production threshold, the π⁰?ω interference in the e ⁺ e^? channel appears largely destructive for the π^? p→e ⁺ e ^? n cross section and constructive for the π⁺ n→e ⁺ e ^? p cross section. The pion beam and the HADES detector at GSI offer a unique possibility to measure these effects. Such data would provide strong constraints on the coupling of vector-meson-nucleon channels to low-lying baryon resonances.     

The PDE-preserving operators on nuclearly entire functions of bounded type

The PDE-preserving operators O on the space of nuclearly entire functions of bounded type H_Nb(E) on a Banach space E are characterized. An operator is PDE-preserving when it preserves homogenous solutions to homogeneous convolution equations. We establish a one to one correspondence between O and a set Σ of sequences of entire functionals, i.e. exponential type functions. In this way, algebraic structures on Σ, such as ring structures, can be carried over to O and vice versa. In particular, it follows that O is a non-commutative ring (algebra) with unity with respect to composition and the convolution operators form a commutative subring (subalgebra). We discuss range and kernel properties, for the operators in O, and characterize the projectors (onto polynomial spaces) in O by determining the corresponding elements in Σ. This revised version was published online in June 2006 with corrections to the Cover Date.     

An investigation of the 2D attractive Hubbard model

We present an investigation of the 2D attractive Hubbard model, considered as an effective model relevant to superconductivity in strongly interacting electron systems. We use both hybrid Monte-Carlo simulations and existing hopping parameter expansions to explore the low temperature domain. The increase of the static S-wave pair correlation with decreasing temperature, which depends weakly on the band filling in the explored temperature range, is analyzed in terms of an expected Kosterlitz-Thouless superconducting transition. Using both our data and previously published results, we show that the evidence for this transition is weak: If it exists, its temperature is very low. The number of unpaired electrons remains nearly constant with temperature at fixed attractive potential strength. In contrast, the static magnetic susceptibility decreases fast with temperature, and cannot be related only to pair formation. We introduce a method by which the Padé approximants of the existing series for the susceptibility give sensible results down to rather low temperature region, as shown by comparison with our numerical data. Received: 30 October 1996 / Revised: 23 October 1997 / Accepted: 29 January 1998     

Mechanism of the glutathione transferase-catalyzed conversion of antitumor 2-crotonyloxymethyl-2-cycloalkenones to GSH adducts

Human glutathione (GSH) transferase (hGSTP1-1) processes with similar kinetic efficiencies the antitumor agents 2-crotonyloxymethyl-2-cyclohexenone (COMC-6), 2-crotonyloxymethyl-2-cycloheptenone (COMC-7), and 2-crotonyloxymethyl-2-cyclopentenone (COMC-5) to 2-glutathionylmethyl-2-cyclohexenone, 2-glutathionylmethyl-3-glutathionyl-2-cycloheptenone, and 2-glutathionylmethyl-2-cyclopentenone, respectively. This process likely involves initial enzyme-catalyzed Michael addition of GSH to the COMC derivative to give a glutathionylated enol(ate), which undergoes nonstereospecific ketonization, either while bound to the active site or free in solution, to a glutathionylated exocyclic enone. Free in solution, GSH reacts at the exomethylene carbon of the exocyclic enone, displacing the first GSH to give the final product. This mechanism is supported by the observation of multiphasic kinetics in the presence of high concentrations of hGSTP1-1 and the ability to trap kinetically competent exocyclic enones in aqueous acid using COMC-6 and COMC-7 as substrates. That the exocyclic enone is formed by nonstereospecific ketonization of an enol(ate) species is indicated by the observation that COMC-6 (chirally labeled with deuterium at the exomethylene carbon) gives stereorandomly labeled exocyclic enone. The isozymes hGSTP1-1, hGSTA1-1, hGSTA4-4, and hGSTM2-2 catalyze the conversion of COMC-6 to final product with similar efficiencies (K(m) = 0.08-0.34 mM, k(cat) = 1.5-6.1 s(-)(1)); no activity was detected with the rat rGSTT2-2 isozyme. Molecular docking studies indicate that in hGSTP1-1, the hydroxyl group of Tyr108 might serve as a general acid catalyst during substrate turnover. The possible significance of these observations with respect to the metabolism of COMC derivatives in multidrug resistant tumors is discussed.     

A high-resolution FT-IR study of the fundamental bands nu7, nu8, and nu18 of ethene secondary ozonide

Ozonization reaction of ethene in neat film at 77 K was performed. Separation of ethene secondary ozonide from the other products of the reaction was performed by continuous pumping of the reactor. Only the products, which evaporated from the walls of the reactor at 185 K, were transferred to the gas cell. The high-resolution infrared absorption spectrum of gaseous ethene secondary ozonide (C(2)H(4)O(3)) in a static gas long-path absorption cell has been recorded in the 900-1100 cm(-1) spectral region at 185 K. The spectral resolution was 0.003 cm(-1). Analyses of the nu(7)(A) band at 1037.0 cm(-1), the nu(8)(A) band at 956.1 cm(-1), and the nu(18)(B) band at 1082.1 cm(-1) have been performed using the Watson Hamiltonian model (A, reduction; III(r), representation). A set of ground-state rotational and quartic centrifugal distortion constants have been obtained, and upper state spectroscopic constants have been determined for the bands investigated. A local resonance observed in nu(18) is explained as c-Coriolis interaction with nu(10) + nu(11).     

NMR studies of conformations and dynamic processes—II : [26]Bicyclophanes with ethylene bridges

The conformations and dynamic processes in two bicyclophanes have been analysed on the basis of temperature-dependent ¹H NMR spectra. Both bicyclophanes are suggested to have a lowest-energy conformation of D₃ symmetry in which the substituents at all ethylene bridges are gauche⁺ (or gauche^?) oriented. The interconversion of the mirror image conformers of each bicyclophane equilibrates the two hydrogens in each methylene group, the barriers being ca 36 and 37 kJ mol^?1, respectively, as determined by line-shape analysis.     

Anionic polymerization of vinyl chloride

Anionic polymerization of vinyl chloride has been studied. Of the organometallic compounds tested as initiators, only butyllithium was found to initiate polymerization. Polymerization in bulk at 0°C and with tert-butyllithium as initiator gave poly(vinyl chloride) in a yield of 38% with M _n = 55,000. Tacticity of the anionic PVC was similar to that of conventional PVC prepared at similar temperatures. Anionic PVC was found to be less branched and more heat-stable than the conventional polymer.