Determination of association constants between enantiomers of orciprenaline and methyl-beta-cyclodextrin as chiral selector by capillary zone electrophoresis using a partial filling technique

The principles for the determination of conditional association constants of enantiomers by capillary zone electrophoresis employing a partial filling technique (PFT) using methyl-beta-cyclodextrin as chiral selector is presented. Orciprenaline was used as a model compound. Partial filling is a separation technique, where different lengths of the chiral selector solution are introduced into the capillary to a final zone length shorter than the effective length of the capillary, prior to application of the solutes. Lengthening of the separation zone results in improving enantioresolution in addition to decreasing electrophoretic mobility of the enantiomers, because of longer interaction time between the solute and chiral selector. The degree of the reduction in electromobility depends on the affinity of the solute to the chiral selector, i.e. strength of the complex formed between the solute and cyclodextrin. The decrease in the electrophoretic mobility with increasing length of the separation zone is used for determination of the association constant. The association constants of the enantiomers of orciprenaline and the chiral selector were evaluated from the slope of the plot, observed electrophoretic mobility versus the ratio between the length of the separation zone and the effective length of the capillary. It was found that the association constants were independent of the chiral selector concentration. The mean values were 110 M(-1) and 160 M(-1) for respective enantiomer. Constants obtained by a conventional CE technique were in good agreement with those from the PFT experiments. The highest enantioselectivityy was obtained when about 50% of the solute was distributed to the selector phase.     

Solubility Data of Diazepam in Binary and Ternary Mixtures of PEGs 200 and 400 with N-Methyl Pyrrolidone and Water at 298.2 K: Experimental Data and Modeling

Experimental solubilities of diazepam in binary and ternary solvents of polyethylene glycols 200 and 400 with N-methyl pyrrolidone and water at T = 298.2 K are reported. The Jouyban–Acree model was used to fit solubility data of diazepam in the binary and ternary solvent mixtures (106 data points) in which the overall mean relative deviations (OMRD %) is 13.1 % and the prediction OMRD % is 31.7 %. The combined version of the Jouyban–Acree model with Hansen solubility parameters was used for fitting and predicting the solubility data and the OMRDs % are 10.0 and 20.8 %, respectively. Also, the previously proposed trained versions of the Jouyban–Acree model were used for predicting the reported data in this work and all results are listed in the tables. The density of the solute-free solvent mixtures were measured and employed to calculate the constants of the Jouyban–Acree model and then the densities of the saturated solutions were predicted.     

Influence of ultrasound on cadmium ion removal by sorption process

This study presents the removal of Cd(II) from aqueous solution by the sorption process in the presence (sono-sorption) and absence (conventional method) of ultrasound. Batch experiments were conducted to study the main parameters such as sorbate concentration, amount of sorbent, contact time, and ultrasound intensity. In addition, the sorbate/sorbent concentration ratios were studied in two different ways: (a) in a constant sorbate concentration and variable amount of sorbent, (b) in a constant amount of sorbent and variable sorbate concentration. The results indicated that under proper conditions, there was a possibility to remove cadmium ion very fast and efficiently from aqueous solution. In addition, the intensity of ultrasound and the sorbate/sorbent concentration ratio were two important factors for the removal of this pollutant and therefore, this study was focused mostly on these two variables.     

A quest for stable 2,2,9,9-tetrahaloplumbacyclonona-3,5,7-trienylidenes at density functional theory

In contrast to cyclonona-3,5,7-trienylidene (1_H) which turns out as a boat-shaped transition state for having a negative force constant, its heavier plumbylenic analogous (2_X) where X = H, F, Cl, Br, and I emerge as boat-shaped minima. This unsubstituted carbene has a triplet ground state while exclusive of 2_I which initially takes on a triplet multiplicity and eventually transforms to a less stable intramolecular ring opening product; all of the plumbylenes (2_H, 2_F, 2_Cl, and 2_Br) have a singlet ground state. Hence, stability anticipated by the singlet (S)–triplet (T) splitting (ΔE_S-T) decreases by going down in the group 17 column: 2_Br > 2_Cl > 2_F > 2_H > 1_H > 2_I. Also, the HOMO-LUMO gap (ΔE_HOMO-LUMO) increases as a result of substituting. From a thermodynamic perspective, our scrutinized 2_Br, 2_Cl, and 2_F are found 1.5–2 times more stable than that of the reported cyclopenta-2,4-dienplumbylene and 2,5-bis(halobora)-cyclopentenplumbylenes analogues, respectively. From a kinetic perspective, these nine-membered plumbylenes are found 20–26 kcal/mol more stable than that of their corresponding five-membered congeners. The NBO analysis on stable singlet 2_Br shows that there is a mesomeric interaction between bromine lone-pair electron and the Pb divalent atom of 2_Br with bonding (σ) and anti-bonding (σ^*) orbitals of carbon–bromine and carbon–lead. The main stabilizing effect appears to be π- and σ-bond hyperconjugation among the iodine heteroatom and divalent center of triplet 2_I. This research signifies the thermodynamic and kinetic stabilities of the biggest unsaturated cyclic plumbylenes hoping to prompt the experimental attention toward them.

     

有机硅活性中间体的研究 II. 一些含环丙基的有机硅化合物的合成及其结构

用锂有机物的方法合成了四种含有环丙基有机硅化合物,对上述每种化合物中可能存在着的立体异构进行了分离和和构型测定。     

Net analyte signal standard addition method (NASSAM) as a novel spectrofluorimetric and spectrophotometric technique for simultaneous determination,application to assay of melatonin and pyridoxine

In this work a new modification of the standard addition method called “net analyte signal standard addition method (NASSAM)” is presented for the simultaneous spectrofluorimetric and spectrophotometric analysis. The proposed method combines the advantages of standard addition method with those of net analyte signal concept. The method can be applied for the determination of analyte in the presence of known interferents. The accuracy of the predictions against H-point standard addition method is not dependent on the shape of the analyte and interferent spectra. The method was successfully applied to simultaneous spectrofluorimetric and spectrophotometric determination of pyridoxine (PY) and melatonin (MT) in synthetic mixtures and in a pharmaceutical formulation.     

The microwave heating of two-dimensional slabs with small Arrhenius absorptivity

The microwave heating of two-dimensional slabs in a long rectangularwaveguide propagating the TE₁₀ mode is examined. The temperaturedependency of the electrical conductivity and the thermal absorptivityis assumed to be governed by the Arrhenius law, while both theelectrical permittivity and the magnetic permeability are assumedconstant. The governing equations are the forced heat equationand the steady-state version of Maxwell's equation while theboundary conditions take into account both convective and radiativeheat loss. Approximate analytical solutions, valid for smallthermal absorptivity, are found for the temperature and theelectric-field amplitude using the Galerkin method. As the Arrheniuslaw is not amenable analytically, it is approximated by a rational-cubicfunction. At the steady state the temperature versus power relationshipis found to be multivalued; at the critical power level thermalrunaway occurs when the temperature jumps from the lower (cool)temperature branch to the upper (hot) temperature branch ofthe solution. In the steady-state limit the approximate analyticalsolutions are compared with the numerical solutions of the governingequations for various special cases. These are the limits ofsmall and large heat loss and an intermediate case involvingradiative heat loss. Results are also presented for a case wheredifferential cooling occurs on the different sides on the slab.An alternative heating scenario, where one end of the waveguideis blocked by a short, is also considered. The approximate solutionsare found for this geometry and compared in the small Biot-numberlimit to Kriegsmann (1997). Also, a control process is presented,which allows thermal runaway to be avoided and the desired finalsteady state to be reached. Various special cases of the feedbackparameters associated with the control process are examined.     

Bi-directional modulation of AMPA receptor unitary conductance by synaptic activity

Background  

Knowledge of how synapses alter their efficiency of communication is central to the understanding of learning and memory. The most extensively studied forms of synaptic plasticity are long-term potentiation (LTP) and its counterpart long-term depression (LTD) of AMPA receptor-mediated synaptic transmission. In the CA1 region of the hippocampus, it has been shown that LTP often involves a rapid increase in the unitary conductance of AMPA receptor channels. However, LTP can also occur in the absence of any alteration in AMPA receptor unitary conductance. In the present study we have used whole-cell dendritic recording, failures analysis and non-stationary fluctuation analysis to investigate the mechanism of depotentiation of LTP.     

Simultaneous separation and enantioresolution of racemic local anesthetic drugs by capillary zone electrophoresis with Tween 20 and methyl-beta-cyclodextrin as selectors, employing a double plug technique

A new approach for simultaneous chiral and achiral separations by capillary zone electrophoresis is described. Two adjacent selector plugs, consisting of Tween 20 as an achiral and methyl-beta-cyclodextrin (CD) as a chiral selector, are employed and four related local anesthetics are used as model compounds. The principles of the partial filling technique, whereby the capillary is filled with the chiral selector solution followed by the micellar solution at different plug lengths and concentrations, prior to application of the solutes, was employed. During the run both capillary ends were dipped in a simple buffer, i.e., one without additives. The two separation media worked independently without any interaction. Separation of the solutes and their enantiomers was regulated by adjusting both the concentration and plug length (PL) of the micellar solution in the capillary, employing methyl beta-CD as chiral selector either at 38 or 76 mM. The solutes were separated on the basis of their affinity towards the micellar phase before they reached the methyl-beta-CD plug for enantioseparation. In the absence of the micellar plug, the enantiomers of prilocaine overlapped those of bupivacaine. The solutes and their enantiomers were completely separated by employing two adjacent plugs consisting of 100 mM Tween 20 solution (PL approximately 10 cm) and methyl-beta-CD solution at either 38 or 76 mM (PL approximately 30 cm).     

Twisting DNA: single molecule studies

Over the past 10 years a number of new techniques have emerged that allow the manipulation of single DNA molecules and other biopolymers (RNA, proteins, etc.). These experiments have permitted the measurement of the DNA stretching and twisting elasticity and have consequently revealed the essential role played by the DNA mechanical properties in its interactions with proteins. We shall first describe the different methods used to stretch and twist single DNA molecules. We will then focus on its behaviour under torsion, especially by discussing the different methods used to estimate its torsional modulus.