Stability testing in an integrated scheme

ISO Guide 35 deals with RM stability issues and scrutinizes the evaluation of stability testing results under the assumption that either there is no trend at all (a rather rare situation), or any observed deterministic change is insignificant and thus can be neglected. However, market demands for reliable reference materials are obviously not limited to stable or at least seemingly stable materials. In many analytical applications, analytes and measurands under consideration are known, or at least suspected, to be unstable on time scales that may vary widely from measurand to measurand. The Federal Institute for Materials Research and Testing (BAM) has developed (and successfully uses) an integrated approach in its certification practice. The approach is based on an initial stability study and subsequent post-certification monitoring. Data evaluation is model-based and takes advantage of all information collected in the stability testing scheme(s). It thus allows one to deal with any kind of instability observed, to assess limiting time intervals at any stress condition in the range tested, to estimate a final expiry date for materials with detected instabilities or the maximum admissible re-testing interval for seemingly stable materials, and to assess maximum admissible stress loads during delivery of the material to the customer. The article describes (and exemplifies) typical study layout, the model selection, and the integrated data assessment.     

Chemical analysis of acidic silicon etch solutions: I. Titrimetric determination of HNO3, HF, and H2SiF6

The chemical etching of silicon using HF-HNO₃ mixtures is a widely used process in the processing of silicon wafers for microelectronic or photovoltaic applications. The control of the etch bath composition is the necessary condition for an effective bath utilization, for the replenishment of the consumed acids, and to maintain a certain etch rate. The present paper describes two methods for the total analysis of the individual etch bath constituents HF, HNO₃, and H₂SiF₆. Both methods start with an aqueous acid-base titration determining the total acid concentration and the concentration of H₂SiF₆. The first method is an acid-base titration using a 0.1 mol L⁻¹ methanolic solution of cyclohexylamine (CHA) as non-aqueous titrant to determine the content of nitric acid. Then, the amount of hydrofluoric acid is calculated from the difference between the total acid and nitric acid content. The second method is based on the determination of the total fluoride concentration using a fluoride ion-selective electrode (F-ISE). The content of hydrofluoric acid is obtained from the difference between the total fluoride content and the amount of fluoride bound as H₂SiF₆. The amount of nitric acid results finally calculated as difference to the total acid content.     

Solution- and bound-state conformational study of N,N',N"-triacetyl chitotriose and other analogous potential inhibitors of hevamine: application of trNOESY and STD NMR spectroscopy

The solution-state conformations of N,N',N"-triacetyl chitotriose (1) and other potential chitinase inhibitors 2-4 were studied using a combination of NMR spectroscopy (NOESY) and molecular mechanics calculations. Determination solely of the global energy minimum conformation was found to be insufficient for an agreement with the NMR results. An appropriate consistency between the NMR experimental data and theoretical calculations was only reached by assessing the structures as population-weighted average conformers based on Boltzmann distributions derived from the calculated relative energies. Analogies, but also particular differences, between the synthetic compounds 2-4 and the naturally-occurring N,N',N"-triacetyl chitotriose were found. Furthermore, the conformation of compounds 1 and 2 when bound to hevamine was also studied using transferred NOESY experiments and the binding process was found to impart a level of conformational restriction on the ligands. The preferred conformation as determined for 1 in the bound state to hevamine belonged to one of the conformational families found for the compound when free in solution, although full characterisation of the bound-state conformations was impeded due to severe signal overlap. Saturation transfer difference NMR experiments were also employed to analyse the binding epitopes of the bound compounds. We thus determined that it is mainly the acetyl amido groups of the trisaccharide and the heterocyclic moiety which are in close contact with hevamine.     

Automated multiple-layer spotting for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of synthetic polymers utilizing ink-jet printing technology

Recently, a new multiple-layer matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) sample spotting technique for poly(ethylene glycol), offering improved analysis possibilities, was described. In this contribution the application of ink-jet printing to automated, multiple-layer MALDI-TOFMS sample preparation of synthetic polymers is presented, allowing accurate deposition of matrix, additive and analyte solutions. The new sample preparation technique was evaluated for poly(ethylene glycol) as well as poly(methyl methacrylate) standards, and optimized settings for both synthetic polymers have been obtained.     

Bestimmung der molaren Masse und der Ladungszahl von Polymerelektrolyten mit der Ultrazentrifuge

Zusammenfassung In der vorliegenden Arbeit wird das Sedimentationsgleichgewicht der Systeme Na₆[H₂W₁₂O₄₀]—NaCI—H₂O und Na₆[H₂W₁₂O₄₀]—NaClO₄— H2O untersucht. Die scheinbare molare Masse Mapp des Natriummetawolframats wird in beiden Systemen als Funktion der Natriummetawolfrarnat-Anfangspartialdichte ₀ ^PX _z gemessen. Durch lineare Extrapolation der Funktion Mapp = Mapp (PP,, ) auf die Polymerelektrolyt-Anfangspartialdichte Null können die Grenzwerte der scheinbaren molaren Masse (Mapp)o ermittelt werden. Aus den (Mapp)o-Werten wird die Abhängigkeit der Größe (ln _PXz /m _BX ) _mPXz von der NaCI- bzw. NaClO₄-Molalität berechnet.Die Bestimmung der molaren Masse und der (stöchiometrischen) Ladungszahl eines Polymerelektrolyten aus den experimentell ermittelten (Mapp)o-Werten unter Anwendung der Lamm-Williams-Gleichung wird diskutiert. Zur Ermittlung der beiden Größen müssen mehrere Versuchsreihen mit zwei verschiedenen Fremdelektrolyten durchgeführt werden. Externe Messungen sind nicht erforderlich.Man erhält auf diese Weise verläßliche Werte so-wohl der molaren Masse als auch der (stächiometrischen) Ladungszahl.

---

Summary The sedimentation equilibria of the systems sodium metatungstate-sodium chloride-water and sodium metatungstate-sodium perchlorate-water are investiated. In both systems the apparent molecular mass Mapp of sodium metatungstate (PX _z) is measured in dependence on partial density ₀ ^PX _z before centrifugation. By linear extrapolation of the function Mapp = Mapp ( ₀ ^PX _z the limiting value (Mapp)o for ₀ ^PX _z = 0 is obtained. The variation with sodium chloride and sodium perchlorate molality of the quantity (ln _{PX z} ^m _BX )mPX_z is calculated from (Mapp)o data.The determination of the molecular mass and the algebraic valency of a polymeric ion by means of the (Mapp)o values calculated by Lamm-Williams equation is discussed. In order to obtain these two quantities at least two series of experiments are required, each of which using a different supporting electrolyte. External measurements are not necessary. In this way reliable values for the molecular mass as well as for the stoichiometric valency are obtained.

---

---

Mit 5 Abbildungen und 3 Tabellen     

Biosensors for environmental pollutants and food contaminants

This review article provides an overview of the most recent literature on biosensors for environmental pollutants and food contaminants. Due to the large number of publications, only papers published between 2000 and January 2003 were considered. Also, while not all of the published literature could be reviewed here, over 200 references are cited to provide a good overview of research undertaken in the last two years. Older publications are covered by a number of earlier review articles. This article provides an introduction into the field including specific consideration of the application areas, describes the typical biosensor assay format used, and is subsequently structured according to the biorecognition elements used (i.e., nucleic acids, enzymes, whole cells, tissue and whole organisms, antibodies and receptors, and biomimetic materials). In addition, a section on microbiosensing systems is provided. Since only very few microbiosensors with applications in environmental and food systems have been published, enabling technology is also covered in this article.Abbreviations BOD biological oxygen demand - cfu colony forming units - DNP dinitrophenol - GFP green fluorescent protein - NASBA nucleic acid sequence-based amplification - PCR polymerase chain reaction - ppt parts per trillion - QCM quartz crystal microbalance - SPR surface plasmon resonance     

Application of Task-specific Ionic Liquids for Intensified Separations

Summary. Ionic liquids offer tremendous opportunities to intensify reactions and separations in process technologies by tuning their physical and chemical properties. Several ionic liquids are suitable for the separation of aromatic and aliphatic hydrocarbons. CO₂ absorption behavior was influenced by the functionalized chains appended to the room temperature ionic liquid (RTIL) cation. Ionic liquids seem able to combine the chemical features of amine solutions with the characteristic advantages of the physical solvents used for CO₂ absorption.     

Stereoselective Synthesis of Isomers of the Naturally Occurring 13-Hydroxy-2,4,9-tetradecatrienoic Acid. Part II [1]

The stereoselective syntheses of four unsaturated hydroxy fatty acids 13S,2E,4E,9E)- 13-hydroxy-2,4,9-tetradecatrienoic acid, (13S,9Z,11E)-13-hydroxy-9,11-tetradecadienoic acid, (13S,9E, 11E)-13-hydroxy-9,11-tetradecadienoic acid, and (13S,2E,4E,9E)-13-hydroxy-2,4,9,11-tetradecatrienoic acid, are described. Wittig reactions, regioselective oxidation of dialcohol 3, and diastereomerization were used.