A method based on diffraction theory for predicting 3D focusing performance of compound refractive X-ray lenses

A method based on the diffraction theory for estimating the three-dimensional (3D) focusing performance of the compound refractive X-ray lenses is presented in this paper. As a special application, the 3D X-ray intensity distribution near the focus is derived for a plano-concave compound refractive X-ray lens. Moreover, the computer codes are developed and some results of 3D focusing performance for a compound refractive X-ray lens with Si material are shown and discussed.     

A theoretical method based on Fourier spectrum analysis for the focusing performances of the X-ray compound refractive lenses

It is important to predict the intensity distribution in focusing plane for designing the X-ray compound refractive lenses. On the basis of analyzing the structure of X-ray compound lenses and comparing it with Praunhofer diffraction system, it is concluded that the X-ray focusing system can be regarded as a kind of Praunhofer diffraction system. Therefore, a method based on Fourier spectrum analysis is presented to predict the intensity distribution in the focusing plane for the X-ray lenses. A brief analysis on the relationship between the parameters of X-ray lenses and their focusing performance is also given in this paper.     

LED微阵列投影系统设计

为满足便携式投影仪的市场需求,设计了一种基于LED微型阵列的投影系统。该系统由显示单元和投影物镜构成。采用尺寸为12 mm×9 mm的自发光LED微型阵列作为系统的显示单元,利用光学设计软件设计了投影物镜。投影物镜采用反远距光学结构,全视场角为80°,焦距为8 mm,属于强光、广角镜头。在空间频率20 lp/mm处,该物镜的调制传递函数大于0. 85,畸变小于2%,符合投影系统的设计要求。该投影系统具有体积小,结构简单,投影效果好,易加工等诸多优势,可为第三代投影技术的发展提供参考。     

光辐射吸收材料表面形貌与吸收率关系研究

光辐射吸收材料不同的表面形貌对入射光具有不同的多重反射吸收效果,对光辐射的吸收有较大的影响,合适的表面形貌可以提高光辐射有效吸收率.本文通过光线追迹的方法对V形表面、正弦表面、具有正态倾角(平均倾角)分布的表面以及具有正态高度分布的表面进行模拟, 分析了这四种表面对光辐射吸收率的提升效果及其入射角特性.通过倾角分布分析,得出不同表面形貌提升吸收率共同的必要条件,即倾角中心分布至少大于30°,并指出V形表面在正入射时对吸收率提升的优越性. 关键词： 光吸收材料 表面形貌 吸收率 表面倾角分布     

Design and fabrication of one-dimensional focusing X-ray compound lens with Al material

A method based on Fourier spectrum analysis for predicting the performances of the X-ray compound lenses is briefly introduced, the theoretical result obtained is the same as that of Fresnel-Kirchhoff approach. A kind of technique named moulding is developed for fabricating the one-dimensional (1D) compound X-ray lens with Al material and the fabrication process is presented. In addition, a two-time coating method is used to improve the numerical apertures of the compound lenses. Furthermore, the focusing performance of the Al compound X-ray lens under the high energy X-rays is measured.     

A top-face-sway electromagnetic micromotor

In this paper, the structure of a top-face-sway electromagnetic micromotor and its principle, fabrication and performance are introduced. A combination of the electromagnetic actuating and the planetary reducing provides this micromotor an advantage of low rotational speed and high torque. In addition, since a flexible coupling absorbs the sway and only outputs rotation, it gives this micromotor a balanced output. The dimension of the micromotor is 5 mm. Its rotation speed has a range of 20 - 860 rpm, and its driving current is 300 mA. The output torque of the micromotor is measured to be 13.0 uNm.     

抛物面型X射线组合折射透镜聚焦性能的理论与实验研究

结合衍射理论和矩阵光学方法得出抛物面型X射线组合折射透镜的光学性能指标(包括其焦距的严格表达式、薄透镜近似的判定准则、透过率和有效孔径,以及极限聚焦光斑尺寸等).采用X射线深度光刻技术实际制作了PMMA材料抛物面型X射线组合折射透镜并给出了工艺测试结果.最后在北京同步辐射装置(BSRF)上,实际构建了基于3种不同结构参数的PMMA材料抛物面型X射线组合折射透镜的微束聚焦实验系统.并实际测试了其聚焦性能,均获得了良好的聚焦效果,给出实测结果并对实测结果进行了分析和讨论.     

一种微型光开关的设计与仿真分析

介绍了一种新型的聚酰亚胺(PI)悬臂梁式电磁驱动微机电系统(MEMS)光开关,并对其总体结构进行了设计与仿真分析.运用有限元分析的方法,设计了永磁体的最佳尺寸并优化了悬臂梁的结构;分析了聚酰亚胺悬臂梁的扭转力、电磁力与挠度的关系.当输入电流为75 mA时,聚酰亚胺悬臂梁达到平衡时的挠度约为1.02 mm,能够满足器件转换光路的要求.     

高能X射线聚焦组合透镜的理论研究

X射线聚焦组合透镜是一种利用折射效应对X射线辐射聚焦的新型元件。针对X射线波段的特性,综合考虑折射和吸收效应得出组合透镜的衍射屏函数,并利用衍射理论推导出X射线组合透镜的设计理论。利用统计学理论中一阶、二阶原点矩表征像面处的光学性能,使设计更简洁。该理论方法可方便地推广到双凹折射单元情况。通过数值计算分析了像向处强度分布的二阶中心矩以及焦点处辐射强度随组合透镜结构参最的变化关系,给出了一种铝基X射线组合透镜的结构参量设计结果。对于设计的组合透镜结构参量,计算了当X射线辐射能量分别为0．93 keV．9．89 keV和29．78 keV时,X射线辐射经过组合透镜后的焦点强度分布。     

空间调制傅里叶变换红外光谱仪干涉系统透射效率研究

光学系统表面的反射与材料的吸收会降低空间调制傅里叶变换红外光谱仪中光的透过率。通过对干涉系统透过率函数的计算和对采样干涉图与复原光谱的仿真,结果显示透过率函数作用下的干涉图像对比度下降,复原光谱中的谱线强度发生衰减。分析表明,干涉图像对比度的下降主要是由分束器对入射光的有效反射引起的,而谱线强度的衰减则是由与增透膜的光强反射率R₁、分束膜的光强反射率R₂和材料的吸收系数α有关的透射效率函数所决定。通过分析论证,对于本文所研究的光谱波段,可以不考虑材料的吸收,所以透射效率主要由R₁和R₂决定。由此,将透射效率作为设计指标,根据系统的设计需求,就可以得到增透膜与分束膜光强反射率的容限值。