Automated direct high-performance liquid chromatographic assay for estetrol, estriol, cortisone and cortisol in serum and amniotic fluid.

An automated direct assay for the simultaneous determination of unconjugated estetrol, estriol, cortisone and cortisol in serum and amniotic fluid, using high-performance liquid chromatography with electrochemical detection and ultraviolet detection, has been developed. The analysis time is ca. 1 h. This system offers good reproducibility with low coefficients of variation (estetrol, 2.3%; estriol, 2.3%; cortisone, 2.6%; cortisol, 1.9%). Detection limits are low enough for routine determinations (estetrol and estriol, 150 pg; cortisone and cortisol, 5 ng). Comparison of the values measured by the present method and by radioimmunoassay revealed significant correlations for estetrol (r = 0.787, p less than 0.01), estriol (r = 0.957, p less than 0.01), cortisone (r = 0.956, p less than 0.01) and cortisol (r = 0.865, p less than 0.01). This system proved to be valuable in monitoring feto-placental function.     

Preparation of New Photosensitive ZrO2 Gel Films Using Hydroxyl-Substituted Aromatic Ketones as Chemical Modification Reagents and their Patterning

ZrO₂ gel films were prepared from zirconium tetra-n-butoxide chemically modified with one of hydroxyl-substituted aromatic ketones and 1′-hydroxy-2′-acetonaphthone, by the sol-gel method. The obtained gel film showed an absorption band, characteristic of the π-π* transition of chelate ring, at around 410 nm. The band was shifted to longer wavelength region than those for the gel films using β-diketones. The reason is thought that the hydroxyl-substituted aromatic ketone has π-electron system to form the condensed chelate ring. The absorption band associated with the chelate ring gradually decreased in intensity with UV-irradiation using a high pressure mercury lamp. This indicates that the chelate ring dissociates by the UV-irradiation and that the gel film exhibits photosensitivity. Utilizing the photosensitivity, fine patterns (about 1 μm) could be fabricated by UV-irradiation through a mask and leaching.     

Nb2O5·nH2O as a heterogeneous catalyst with water-tolerant Lewis acid sites

Niobic acid, Nb(2)O(5)·nH(2)O, has been studied as a heterogeneous Lewis acid catalyst. NbO(4) tetrahedra, Lewis acid sites, on Nb(2)O(5)·nH(2)O surface immediately form NbO(4)-H(2)O adducts in the presence of water. However, a part of the adducts can still function as effective Lewis acid sites, catalyzing the allylation of benzaldehyde with tetraallyl tin and the conversion of glucose into 5-(hydroxymethyl)furfural in water.     

Chloro-Modified Magnetic Fe3O4@MCM-41 Core–Shell Nanoparticles for L-Asparaginase Immobilization with Improved Catalytic Activity,Reusability, and Storage Stability

This paper describes a new support that permits to efficient immobilization of L-asparaginase (L-ASNase). For this purpose, Fe₃O₄ magnetic nanoparticles were synthesized and coated by MCM-41. 3-chloropropyltrimethoxysilane (CPTMS) was used as a surface modifying agent for covalent immobilization of L-ASNase on the magnetic nanoparticles. The chemical structure; thermal, morphological, and magnetic properties; chemical composition; and zeta potential value of Fe₃O₄@MCM-41-Cl were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential thermal analysis (DTA), differential scanning calorimetry (DSC), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray (EDX), X-ray diffraction patterns (XRD), and zeta-potential measurement. The immobilization efficiency onto Fe₃O₄@MCM-41-Cl was detected as 63%. The reusability, storage, pH, and thermal stabilities of the immobilized L-ASNase were investigated and compared to that of soluble one. The immobilized enzyme maintained 42.2% of its original activity after 18 cycles of reuse. Furthermore, it was more stable towards pH and temperature compared with soluble enzyme. The Michaelis–Menten kinetic properties of immobilized L-ASNase showed a lower V_max and a similar K_m compared to soluble L-ASNase. Immobilized enzyme had around 47 and 32.5% residual activity upon storage a period of 28 days at 4 and 25 °C, respectively. In conclusion, the Fe₃O₄@MCM-41-Cl@L-ASNase core–shell nanoparticles could successfully be used in industrial and medical applications.

     

Structure-based engineering of a plant type III polyketide synthase: formation of an unnatural nonaketide naphthopyrone

Pentaketide chromone synthase (PCS) from Aloe arborescens is a novel plant-specific type III polyketide synthase (PKS) that produces 5,7-dihydroxy-2-methylchromone from five molecules of malonyl-CoA. On the basis of the crystal structures of wild-type and M207G mutant PCS, the F80A/Y82A/M207G triple mutant was constructed and shown to produce an unnatural novel nonaketide naphthopyrone by sequential condensations of nine molecules of malonyl-CoA. This is the first demonstration of the formation of a nonaketide by the structurally simple type III PKS. A homology model predicted that the active-site cavity volume of the triple mutant is increased to 4 times that of the wild-type PCS.     

Lewis Acid-Catalyzed Intramolecular [2 + 2] Cycloaddition of alpha-Ester-Substituted Conjugated Dienyl- and Trienylphosphonates. New Synthesis of Functionalized Cyclic Terpenoids

alpha-Ester-substituted 1,3-dienylphosphonates 7 and 8, prepared by the Knoevenagel condensation, underwent intramolecular [2 + 2] cycloaddition in the presence of Lewis acid to form bicyclo[4.2.0] (26-57% yield) and bicyclo[3.2.0]skeleton (14-38% yield), respectively. Similar treatment of homologous 1,3-dienylphosphonate 11 and 1,3,5-trienylphosphonate 12 resulted in the formation of ionone derivatives (30-94% yield). The intramolecular cycloaddition reaction was applicable to several conjugated dienes bearing an ester group.     

Preparation of TiO2 nanocrystalline films controlled by acetylacetone/polyethylene glycol and their photoelectric properties

TiO₂ nanocrystalline films were prepared from titanium tetra-n-butoxide modified with double hydrolysis inhibitors, acetylacetone and polyethylene glycol (PEG), in mixture of methanol and ethanol. The correlation among surface structure of the TiO₂ films, preparation conditions, and photovoltaic properties of the solar cells using the TiO₂ films was investigated. The particle size of the obtained TiO₂ films was decreased as the PEG content increased. The nanostructured films with the narrow distribution of particle size could be prepared. The amounts of adsorbed dyes for these TiO₂ films were larger than that without PEG. The performance of the solar cell fabricated using the TiO₂ film improved as the amount of the PEG increased, and the solar cell using the TiO₂ film prepared from the solution with 30 wt% PEG exhibited the highest performance.     

A new continuation method for complementarity problems with uniformP-functions

The complementarity problem with a nonlinear continuous mappingf from the nonnegative orthantR ₊ ⁿ ofR ⁿ intoR ⁿ can be written as the system of equationsF(x, y) = 0 and(x, y) R ₊ ²ⁿ , whereF denotes the mapping from the nonnegative orthantR ₊ ²ⁿ ofR ²ⁿ intoR ₊ ⁿ × Rⁿ defined byF(x, y) = (x ₁y₁,,x_ny_n, f₁(x) – y₁,, f_n(x) – y_n) for every(x, y) R ₊ ²ⁿ . Under the assumption thatf is a uniformP-function, this paper establishes that the mappingF is a homeomorphism ofR ₊ ²ⁿ ontoR ₊ ⁿ × Rⁿ. This result provides a theoretical basis for a new continuation method of tracing the solution curve of the one parameter family of systems of equationsF(x, y) = tF(x ⁰, y⁰) and(x, y) R ₊ ²ⁿ from an arbitrary initial point(x ⁰, y⁰) R ₊ ²ⁿ witht = 1 until the parametert attains 0. This approach is an extension of the one used in the polynomially bounded algorithm recently given by Kojima, Mizuno and Yoshise for solving linear complementarity problems with positive semi-definite matrices.     

Fullerene as a standard sample for adjusting the NMR spectral resolution in multiple-quantum magic-angle-spinning experiments.

A method using fullerene for adjusting the NMR spectral resolution for multiple quantum magic angle spinning (MQMAS) experiments is proposed. To observe its (13)C MAS signal, it is not necessary to apply (1)H decoupling, unavailable with single-resonance MQMAS probes. Although (13)C T(1) of fullerene is rather long, a recycle time of 5 s in shimming yields its signal with sufficiently high sensitivity if setting the appropriate Ernst angles corresponding to magnetic fields. It is demonstrated that so-adjusted high resolution is reflected in the (87)Rb MQMAS spectra of RbNO(3).