Sulfonated poly(aryl ether ketone)s containing naphthalene moieties obtained by direct copolymerization as novel polymers for proton exchange membranes

A series of sulfonated poly(aryl ether ketone)s (SPAEKs) were prepared by aromatic nucleophilic polycondensation of 2,6‐dihydroxynaphthalene with 5,5′‐carbonyl‐bis(2‐fluorobenzenesulfonate) and 4,4′‐difluorobenzophenone. The structure and degree of sulfonation (DS) of the SPAEKs were characterized using ¹H NMR spectroscopy. The experimentally observed DS values were close to the expected values derived from the starting material ratios. The thermal stabilities of the SPAEKs were characterized by thermogravimetric analysis, which showed that in acid and sodium salt forms they were thermally stable in air up to about 240 and 380 °C, respectively. Transparent membranes cast from the directly polymerized SPAEKs exhibited good mechanical properties in both dry and hydrated states. The dependence of water uptake and of membrane swelling on the DS at different temperatures was studied. SPAEK membranes with a DS from 0.72 to 1.60 maintained adequate mechanical properties after immersion in water at 80 °C for 24 h. The proton conductivity of SPAEK membranes with different degrees of sulfonation was measured as a function of temperature. The proton conductivity of the SPAEK films increased with increased DS, and the highest room temperature conductivity (4.2 × 10^?2 S/cm) was recorded for a SPAEK membrane with a DS of 1.60, which further increased to 1.1 × 10^?1 S/cm at 80 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2866–2876, 2004     

Discrete and Continuous Time Modulated Random Walks with Heavy-Tailed Increments

We consider a modulated process S which, conditional on a background process X, has independent increments. Assuming that S drifts to −∞ and that its increments (jumps) are heavy-tailed (in a sense made precise in the paper), we exhibit natural conditions under which the asymptotics of the tail distribution of the overall maximum of S can be computed. We present results in discrete and in continuous time. In particular, in the absence of modulation, the process S in continuous time reduces to a Lévy process with heavy-tailed Lévy measure. A central point of the paper is that we make full use of the so-called “principle of a single big jump” in order to obtain both upper and lower bounds. Thus, the proofs are entirely probabilistic. The paper is motivated by queueing and Lévy stochastic networks.     

Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

Theoretical analysis of singlet and triplet excited states of nickel porphyrins

Local density and generalized gradient approximation time-dependent density functional methods have been used for calculation of the singlet and triplet excited states of nickel-porphine, Ni-tetraphenyloporphine, and Ni-octaethyloporphyrine. Special attention is paid to metal-ligand transitions and d-d transitions. It is shown that the lowest exited singlet states of the three compounds can be described as a transfer of an electron from the porphine ring to the d(x2-y2) orbital of the nickel atom. On the other hand, the lowest excited triplet state arises from promotion of an electron between two nickel d orbitals, an occupied d(z2) and an empty d(x2-y2). It is proposed that a rapid quenching of the excited singlet states is due to an ultrafast intersystem crossing between 1Eg)and 3Eg or 3B1g states.     

Fast spatially localised electrooptical mode in vertically aligned nematic LCs with negative dielectric anisotropy

ABSTRACT

Electro-optical switching and the liquid crystal (LC) director distribution are studied in spatially periodic electric field for vertically aligned LC with negative dielectric anisotropy. Two electro-optical switching modes characterised by different switching times are observed. These modes are well distinguished optically by choosing proper geometry for the polarisers axes orientation. One of these modes is significantly faster as compared to the other. The fast switching is explained in terms of localised near-to-surface director reorientation. The 3D-numerical simulation shows very good agreement with the experiment: it points out the existence of the disclination lines and field-stabilised walls responsible for the localised director field switching and its relaxation. Possibilities of enhancing the fast mode for high-speed light modulators are discussed.     

Adaptive efficient estimation for generalized semi-Markov big data models

Annals of the Institute of Statistical Mathematics - In this paper we study generalized semi-Markov high dimension regression models in continuous time, observed at fixed discrete time moments. The...     

Boron trifluoride-methanol complex—mild and powerful reagent for deprotection of labile acetylated amines

A set of amino-group possessing cyanine dyes is obtained from their N-acetyl derivatives via deprotection with boron trifluoride-methanol complex in good yields.     

Tetranuclear manganese(II) complexes of thiacalixarene macrocycles with trigonal prismatic six-coordinate geometries: synthesis, structure, and magnetic properties

Two tetranuclear manganese(II) complexes [Mn(II)4(thiaS)2] (1) and [Mn(II)4(thiaSO)2] (2) have been synthesized under solvothermal conditions in methanol with p-tert-butylthiacalix[4]arene (thiaS) and p-tert-butylsulfinylthiacalix[4]arene (thiaSO). For both complexes, the structure has been established from single-crystal X-ray diffraction. [Mn4(thiaS)2].H2O (1) crystallizes in the orthorhombic Immm (No. 71) space group with the following parameters: a = 18.213 (5) angstroms, b = 19.037 (5) angstroms, c = 29.159 (5) angstroms, V = 10110 (4) angstroms3, and Z = 4. [Mn4(thiaSO)2].H2O (2) crystallizes in the monoclinic C2/m (No. 12) space group with the following parameters: a = 33.046(1) angstroms, b = 19.5363 (8) angstroms, c = 15.7773 (9) angstroms, beta = 115.176 (2) degrees, V = 9218.3 (8) angstroms3, and Z = 4. The two complexes are neutral and are best described as manganese squares sandwiched between two thiacalixarene macrocycles. In both complexes, each manganese center is six-coordinated in a trigonal prismatic geometry with four phenoxo oxygen atoms plus two sulfur atoms for 1 or two oxygen atoms from SO groups for 2. The two tetranuclear complexes exhibit identical magnetic behaviors resulting from antiferromagnetic interactions between the four manganese centers. The simulation of the magnetic susceptibility was done considering a single exchange-coupling constant between the manganese(II) ions, J (H = -J(S1S2 + S2S3 + S3S4 + S1S4)). The best fits give the same result for the two complexes: g = 1.94 and J = -5.57 cm(-1).     

A high-pressure mass spectrometric and density functional theory investigation of the thermochemical properties and structure of protonated dimers and trimers of glycine

A new modification of pulsed-ionization high-pressure mass spectrometry (PHPMS) has been used to perform equilibrium thermochemical studies for relatively nonvolatile biomolecules such as amino acids. Binding enthalpy and entropy changes have been measured for proton-bound clusters of glycine, which are in good agreement with both theoretical (DFT) results of this work and a previous blackbody infrared dissociation experiment. Experimental data indicate that a number of conformers of the proton-bound dimer of glycine may coexist in the explored temperature range (360-460 K). Several new, conceptually different isomers (two of them zwitterionic) have been found by DFT calculations, one of which is 7 kJ mol(-1) lower in energy than the structure previously reported to be the energy minimum.     

Fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) for fuel cell applications

A series of fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) were synthesized via aromatic nucleophilic substitution polymerization. The sulfonation content (SC) was controlled by the feed ratios of sulfonated and nonsulfonated monomers. Flexible and strong membranes in the sulfonic acid form were obtained from cast membranes in the sodium salt forms by treatment with acid. The thermal properties, water uptake, swelling ratio, water state, oxidative stability, proton conductivity and methanol permeability were investigated. All the polymers had proton conductivities greater than 1 × 10⁻² S/cm at room temperature, and the conductivity values of m-SPFEEKK-80 and p-SPFEEKK-80 were up to 1.86 × 10⁻¹ and 1.78 × 10⁻¹ S/cm at 100 °C. This series of polymers also possessed good dimensional stability in water and low methanol crossover.