H-point standard addition method for the selective simultaneous determination of nickel and copper using 1-(2-pyridylazo)-2-naphthol in Tween 80 micellar media.

The H-point standard addition method (HPSAM) has been applied for the simultaneous determination of nickel and copper in trace levels, using 1-(2-pyridylazo)-2-naphthol (PAN) as a chromogenic reagent in aqueous Tween 80 micellar media. Under the optimum condition, the simultaneous determinations of nickel and copper by HPSAM were performed. The absorbances at one pair of wavelengths, 548 and 579 nm, were monitored with the addition of standard solutions of copper. The method is able to accurately determine copper-to-nickel ratios of 15:1 to 1:10 (Wt/Wt). The effects of diverse ions on the determination of nickel and copper to investigate the selectivity of the method were also studied. The recommended procedure was successfully applied to some water and alloy samples.     

Spectrophotometric and AAS determination of trace amounts of cobalt after preconcentration by using alpha-benzilmonoxime-microcrystalline naphthalene.

The formed cobalt-a-benzilmonoxime complex was adsorbed onto microcrystalline naphthalene. Then it was determined by zero and first derivative spectrophotometry and by atomic absorption spectrophotometry (AAS) after dissolving into chloroform and methylisobutylketone (MIBK), respectively. Under optimum conditions, cobalt in the range of 1.0 - 20.0, 0.4 - 30.0 and 2.5 - 50.0 microg could be determined by spectrophotometry, first derivative spectrophotometry and AAS method, respectively. By the method, a preconcentration factor equal to approximately 30 for cobalt was obtained. The effect of diverse ions on the determination of 5.0 microg cobalt was also studied. The method was successfully applied to some pharmaceuticals and synthetic alloy samples.     

Chemical Constituents of the Essential Oil of <Emphasis Type="Italic">Nepeta oxyodonta</Emphasis>

Water-distilled essential oil from the aerial parts of Nepeta oxyodonta Boiss. was analyzed by GC/MS for the first time. Fifty-eight components were identified. The major components were (E)-caryophyllene (12.6%), spathulenol (8.5%), β-bourbonene (8.1%), germacrene-D (7.4%), α-cadinol (7.3%), germacrene-D-4-ol (6.8%), T-cadinol (5.6%), and caryophyllene oxide (5.3%).__________Published in Khimiya Prirodnykh Soedinenii, No. 2, pp. 141–142, March–April, 2005.     

Using a Natural Surfactant for Synthesize of NiO and CuO Nanostructures via Simple and Fast Microwave Approach

NiO and CuO nanostructures were synthesized successfully via simple and fast microwave approach. Olive oil was chose as surfactant for stabilizing nanostructures. Different parameters such as microwave time and power and olive oil concentration were investigated on product size and morphology. The products were characterized with X-ray diffraction pattern, scanning electron microscopy, transmission electron microscopy and energy dispersive spectrometry analysis.     

One-step synthesis of agarose coated magnetic nanoparticles and their application in the solid phase extraction of Pd(II) using a new magnetic field agitation device

A magnetic solid phase extraction method based on agarose coated magnetic nanoparticles)ACMNPs(coupled to a new magnetic field agitation (MFA) device was developed and investigated for the separation, preconcentration and determination of Pd(II) in aqueous solutions. For the first time, the formation of the nanoparticles and their encapsulation in agarose micro-flakes was conducted in a single step. For this purpose, preparation of the magnetic iron oxide nanoparticles was performed in an alkaline agarose solution. The sizes of Fe₃O₄ nanoparticles and agarose micro-flakes were 10–14 nm and 90–130 μm, respectively. The nanomagnetic agarose particles were functionalized by iminodiacetic acid and subjected to magnetic field agitation in the MFA device. The influence of different analytical parameters such as pH, ionic strength, type and volume of desorption solvent and amount of the adsorbent on the preconcentration of Pd(II) were investigated. Eight replicated analysis at the optimized conditions, resulted in a recovery of 94.1% with an RSD of 5.2% for Pd(II). The detection limit of the method (3σ) was 47 ng L⁻¹ for the analyte. The method was successfully applied to the determination of Pd(II) in natural water samples.     

Two‐dimensional modeling for stability analysis of two‐phase stratified flow

The effect of wavelength and relative velocity on the disturbed interface of two‐phase stratified regime is modeled and discussed. To analyze the stability, a small perturbation is imposed on the interface. Growth or decline of the disturbed wave, relative velocity, and surface tension with respect to time will be discussed numerically. Newly developed scheme applied to a two‐dimensional flow field and the governing Navier–Stokes equations in laminar regime are solved. Finite volume method together with non‐staggered curvilinear grid is a very effective approach to capture interface shape with time. Because of the interface shape, for any time advancement, a new grid is performed separately on each stratified field, liquid, and gas regime. The results are compared with the analytical characteristics method and one‐dimensional modeling. This comparison shows that solving the momentum equation including viscosity term leads to physically more realistic results. In addition, the newly developed method is capable of predicting two‐phase stratified flow behavior more precisely than one‐dimensional modeling. It was perceived that the surface tension has an inevitable role in dissipation of interface instability and convergence of the two‐phase flow model. Copyright © 2009 John Wiley & Sons, Ltd.     

Intermittency of energy in rapid granular shear flows

Hard-disk simulations are used for two-dimensional rapid granular shear flows of circular disks between two rotating cylinders. The intermittency effects associated with the rate of the energy dissipation of collisions are studied. The statistics of intermittent signals of energy dissipation reveals that a power law governs the dynamics of rapid shear granular flows. A dynamical system approach based on the Gledzer-Ohkitani-Yamada shell model of turbulence is employed to reproduce signals for energy dissipation that are statistically consistent with those from simulations. The results suggest that rapid granular flows can be analyzed by appropriate turbulent models.