An improved numerical simulator for multiphase flow in porous media

In basin modelling the thermodynamics of a multicomponent multiphase fluid flux are computationally too expensive when derived from an equation of state and the Gibbs equality constraints. In this article we present a novel implicit molar mass formulation technique using binary mixture thermodynamics. The two proposed solution methods, with and without cross derivative terms between components, are based on a preconditioned Newton‐GMRES scheme for each time‐step with analytical computation of the derivatives. These new algorithms reduce significantly the numerical effort for the computation of the molar masses, and we illustrate the behavior of these methods with numerical computations. Copyright © 2004 John Wiley & Sons Ltd.     

High performance liquid chromatographic separation of polar and non-polar chlorophyll pigments from algae using a wide pore polymeric octadecylsilica column

A method employing a wide pore polymeric reversed phase column has been developed for the separation of most of the chlorophylls and related compounds previously described as occurring in marine microalgae. The high selectivity toward molecular shape of this kind of stationary phase has enabled compounds of very similar structure, such as chlorophylls c₁, c₂ and Mg-divinylpheoporphyrin a₅ monomethyl ester, and chlorophyll a and the phytol-substituted chlorophyll c-like pigments, which commonly coelute on monomeric bonded phases, to be resolved in a single run. Some of these pigments, formerly thought to be a single compound, have, in fact, been demonstrated to be groups of two or more. The method has been successfully applied to both algal cultures and natural sea water samples. When visible light absorbance detection was used, the method proved suitable for separation of various carotenoids.     

Enhancement of the emission yield of silicon nanocrystals in silica due to surface passivation

The ability of surface passivation to enhance the photoluminescence (PL) emission of Si nanocrystals in SiO₂ has been investigated. Silicon precipitation in implanted samples takes place in a time scale of few minutes at 1100°C. For longer annealing at the same temperature, the PL intensity of the Si nanocrystals increases and eventually reaches saturation, while it correlates inversely with the amount of Si dangling bonds at the Si–SiO₂ interface (P_b centers), as measured by electron spin resonance. This combined behavior is independent on the silica matrix properties, implantation profiles and annealing atmosphere and duration. The observation that the light emission enhancement is directly related to the annealing of P_b centers is confirmed by treatment in forming gas. This mild hydrogenation at much lower temperature (450°C) leads to a complete passivation of the P_b defects, increasing at the same time the PL yield and the lifetime.     

Mass spectrometric analysis of ceramide perturbations in brain and fibroblasts of mice and human patients with peroxisomal disorders

In this study, the levels and composition of ceramides in brains of newborn mice lacking peroxisomes (Pex5-/-, Zellweger mice) were analyzed using normal-phase high-performance liquid chromatography/atmospheric pressure chemical ionization mass spectrometry (HPLC/APCI-MS). Total ceramide compositions were found to be comparable to that of control animals. However, a minor ceramide species, containing hexacosanoic/hexacosenoic acid as the amide fatty acid, was 9-fold increased. Also, in the sphingomyelin-derived ceramides this species was elevated. Subsequent analysis of extracts from fibroblasts of Pex5-/- mice and mice with a defective peroxisomal beta-oxidation (lacking D-specific multifunctional protein 2 (MFP2)), revealed, again, a similar rise in this particular ceramide. Further, this ceramide was elevated in human X-ALD fibroblasts as well. Whether C26:1/0-ceramide is linked to some of the pathology seen in Zellweger syndrome remains to be investigated. However, an increase in this sphingolipid can be considered as a diagnostic criterion for diseases caused by defects in peroxisome biogenesis or peroxisomal beta-oxidation.     

Effect of cerium, holmium and samarium ions on the thermal and structural properties of the HZSM-12 zeolite

The study of the incorporation of rare earth elements as additives in Y zeolites is a very interesting field of research, mainly by its potential application as additives in catalytic cracking process. In this work was studied the thermal and structural properties of cerium, holmium and samarium supported on HZSM-12 zeolite. The obtained materials were characterized by X-ray diffraction (XRD), infrared spectroscopy (FTIR), nitrogen adsorption, thermogravimetry (TG/DTG), differential scanning calorimetry (DSC) and differential thermal analysis (DTA). TG/DSC/DTA analyses showed that the dehydration temperatures of RE/HZSM-12 zeolites (RE=Ce, Ho, Sm) increase in relation to pure HZSM-12. The acid properties were investigated by pyridine thermo desorption via TG. The results showed two events of mass loss attributed to elimination of pyridine adsorbed on the weak+medium acid sites and on the strong acid sites.     

A rapid and sensitive method for simultaneous determination of lamivudine and zidovudine in human serum by on-line solid-phase extraction coupled to liquid chromatography/tandem mass spectrometry detection

A method based on solid-phase extraction (SPE) coupled to high-performance liquid chromatography (HPLC) with positive ion electrospray ionization tandem mass spectrometry (ESI-MS/MS) detection was developed for the simultaneous determination of lamivudine (3TC) and zidovudine (AZT) in human serum, using didanosine (ddI) as internal standard. The acquisition was performed in multiple reaction monitoring (MRM) mode, monitoring the transitions m/z 230.0 --> 111.8 for 3TC, m/z 268.1 --> 126.8 for AZT, and m/z 237.2 --> 136.8 for ddI. The limits of detection and quantitation were 3 and 10 ng/mL for 3TC, and 5 and 15 ng/mL for AZT. The method was linear in the studied ranges (10-1500 ng/mL for 3TC and 15-3000 ng/mL for AZT), with r(2) > 0.99 for each drug, and the run time was 4 min. The intra-assay precisions (%) were in the ranges 1.9-8.7 (3TC) and 2.2-8.9 (AZT), the inter-assay precisions were in the ranges 2.6-9.0 (3TC) and 4.2-8.1 (AZT), and the intra- and inter-assay accuracies were >97% for both drugs. The absolute recoveries were 95-99% for 3TC (45, 600 and 1200 ng/mL) and 104-112% for AZT (45, 1000 and 2400 ng/mL). The analytical method was applied to a bioequivalence study in which 24 healthy adult volunteers received single oral doses of the reference formulation and two test combined AZT/3TC tablets, in an open, three-period, balanced, randomized, crossover protocol. Based on the 90% confidence interval of the individual ratios (test formulation/reference formulation) for C(max) (peak serum concentration) and AUC(0-inf) (extrapolated area under the serum concentration vs. time curve from time zero to infinity), it was concluded that the two test formulations are bioequivalent to the reference formulation with respect to the rate and extent of absorption of both 3TC and AZT.     

Modeling the adsorption and precipitation processes of Cu(II) on humin

Humins (HU) are the most insoluble fraction of humic substances. Chemically, they can be considered as humic macromolecules bonded to the mineral matter of soil. The HU have a marked colloidal character and they are extremely important in retention of pollutants in soils. The aim of this work is to combine adsorption data with spectroscopic techniques in order to study the adsorption and precipitation processes of Cu(II) on HU. Analysis of sorption isotherms by means of several single-adsorption-process-based models makes it possible to obtain the speciation diagrams of Cu(II) species on HU surfaces. Further, FTIR (which provides information about the changes in the surface groups of the HU) and DRX (which shows the formation of possible crystalline phases on the HU surface) were used to determine the specific interactions of Cu(II) cations with the surface reactive groups of HU. The shape of the isotherms at constant pH varies with pH from L1-type (pH 2-4) to L3-type (pH 5-6) and S-type (pH 8), which indicates a change in the retention mechanism. When pH is 2 the retention of Cu(II), as [Cu(H(2)O)(6)](2+), is the preferred retention mechanism. The retained quantity of Cu(II) as [Cu(OH)(H(2)O)(5)](+) increases with pH. Starting from pH 4 the Cu(II) begins its precipitation, which is the preferred retention mechanism at pH 8. The presence of HU has a great influence on the precipitation process of Cu(II), giving rise to botalackite, which reveals epitaxial growth of crystals.     

Selective extraction of astaxanthin from crustaceans by use of supercritical carbon dioxide

An on-line supercritical fluid extraction (SFE) system coupled to a continuous flow manifold including a UV detector was used as a screening system to extract astaxanthin from crayfish, which was found to be the major carotenoid present in the samples. This compound constitutes the principal additive used to dye salmon flesh. The flow manifold was used to confirm the presence of astaxanthin in the crustacean samples. Also, an HPLC/UV-vis method was used to ascertain that this compound was the major carotenoid extracted under the optimum SFE conditions employed. The influence of SFE operating variables such as pressure, temperature, equilibration time, extraction time, trap temperature, and volume of CO₂ modifier was examined in order to maximize the efficiency of analyte extraction. The use of supercritical CO₂ enables the expeditious, selective, quantitative extraction of astaxanthin from crustaceans.     

A novel strategy towards the asymmetric synthesis of orthogonally funtionalised 2-N-benzyl-N-alpha-methylbenzylamino- 5-carboxymethyl-cyclopentane-1-carboxylic acid

The asymmetric synthesis of the orthogonally funtionalised compounds tert-butyl 2-N-benzyl-N-alpha-methylbenzylamino-5-methoxycarbonylmethylcyclopentane- 1-carboxylate and methyl 2-N-benzyl-N-alpha-methylbenzylamino-5-carboxymethylcyclo- pentane-1-carboxylate by a domino reaction of tert-butyl methyl (E,E)-octa-2,6- diendioate with lithium N-alpha-methylbenzyl-N-benzylamide initiated by a Michael addition, subsequent 5-exo-trig intramolecular cyclisation and posterior selective hydrolysis with trifluoroacetic acid is reported.