Glycol-based sol-gel process for the fabrication of ferroelectric PZT thin films

A new sol-gel system using ethylene glycol was developed for the fabrication of PZT thin films with compositions near the morphotropic phase boundary Pb(Zr_0.52Ti_0.48)O₃. Ethylene glycol was used as both a chelating agent and a solvent to replace the highly toxic methoxyethanol used in previous formulations. Thin films were deposited by spin coating the solutions onto platinized silicon substrates. Films were completely crystallized by about 600°C and contained the ferroelectric perovskite phase. A dielectric constant of about 750–800 at 1 KHz was obtained for thin films of 0.3 µm thickness. The hysteresis measurements revealed a remanent polarization of 15 mC/cm² with a coercive field of 60 kV/cm.     

Role of axial ligand on the electronic structures of active intermediates in cytochrome P-450, peroxidase and catalase

DFT method (B3LYP) with 6-31G^* basis set was utilized in the computation of a fully optimized structure, net atomic charges and spin densities of the intermediate of cytochrome P-450-oxoiron(IV) porphyrin cation radical, compound I – in the presence of axial ligand such as thiolate (SMe⁻) imidazole (IM), phenoxide (OPh⁻), methoxide (OMe⁻) and chloride (Cl⁻). The results show doublet states in compound I are about 2–4 kcal/mol more stable than quartet states for all aforementioned ligands, and the doublet state is the ground state in all cases. However, electron donor ability of the ligands are in the order of SMe⁻ > IM > OMe⁻ > OPh⁻ > Cl⁻. Also the active oxidant intermediate of cytochrome P-450 between different mesomeric structures select sulfur oxygen radical type structure and can be viewed as (RS^↓)Fe^↑(IV)(O^↑)(Por). In horseraddish peroxidase (HRP) and peroxidase with histidine axial ligand π cation radical character of porphyrin ring is preferred (Im)Fe^↑(IV)(O^↑)(Por^↓). For the ligands such as OMe⁻, OPh⁻ and Cl⁻ oxidation mainly took place on the iron and the active intermediate can be viewed as (L)Fe^↑(V)(O)(Por) with one unpaired electron localized on the iron.     

Preservation theorems in linear continuous logic

Linear continuous logic is the fragment of continuous logic obtained by restricting connectives to addition and scalar multiplications. Most results in the full continuous logic have a counterpart in this fragment. In particular a linear form of the compactness theorem holds. We prove this variant and use it to deduce some basic preservation theorems.     

Starch nanoparticles as a bio-nanocatalyst in synthesis of diheteroaryl thioethers

Nanostarch is shown to be a highly efficient, eco-friendly and heterogenous organocatalyst for the synthesis of the diheteroaryl thioethers via one-pot reaction of methylcarbonyls, thiourea and iodine in DMSO. This method offers significant advantages such as available starting materials, higher purity and excellent yield of products, very easy reaction conditions and absence of any tedious purification. Furthermore, because of employing eco-friendly catalyst without using transition metal catalysts, this novel method emerges as a green-approach leading to less harmful residues. Moreover, a mechanism was proposed to rationalize the reaction and the role of starch nanoparticles was also investigated in these transformations.     

In Silico and Experimental Characterization of Chimeric Bacillus thermocatenulatus Lipase with the Complete Conserved Pentapeptide of Candida rugosa Lipase

Lipases are one of the highest value commercial enzymes as they have broad applications in detergent, food, pharmaceutical, and dairy industries. To provide chimeric Bacillus thermocatenulatus lipase (BTL2), the completely conserved pentapeptide (¹¹²Ala-His-Ser-Gln-Gly¹¹⁶) was replaced with similar sequences (²⁰⁷Gly-Glu-Ser-Ala-Gly²¹¹) of Candida rugosa lipase (CLR) at the nucleophilic elbow region. For this purpose, three mutations including A112G, H113E, and Q115A were inserted in the conserved pentapeptide sequence of btl2 gene. Based on the crystal structures of 2W22, the best structure of opened form of the chimeric lipases were garnered using the MODELLER v9.10 software. The native and chimeric lipases were docked to a set of ligands, and a trial version of Molegro Virtual Docker (MVD) software was used to obtain the energy values. Docking results confirmed chimeric lipase to be better than the native lipase. Following the in silico study, cloning experiments were conducted and expression of native and chimeric btl2 gene in Pichia pastoris was performed. The native and chimeric lipases were purified, and the effect of these mutations on characteristics of chimeric lipase studied and then compared with those of native lipase. Chimeric lipase exhibited 1.6-fold higher activity than the native lipase at 55 °C. The highest percentage of both lipases activity was observed at 60 °C and pH of 8.0. The ion Ca²⁺ slightly inhibited the activity of both lipases, whereas the organic solvent enhanced the lipase stability of chimeric lipase as compared with the native lipase. According to the results, the presence of two glycine residues at the conserved pentapeptide region of this chimeric lipase (¹¹² Gly-Glu-Ser-Ala-Gly ¹¹⁶) may increase the flexibility of the nucleophilic elbow region and affect the enzyme activity level.     

Determination of lead (II) ion by highly selective and sensitive lead (II) membrane electrode based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl) methyliden)hydrazono)metyl)phenol

A PVC (poly vinyl chloride) membrane electrode for lead ion based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl)methyliden)hydrazono)metyl)phenol (HMHMP) as a membrane carrier was prepared. This electrode exhibited linear response with Nernstian slope of 29.2?±?0.2?mV per decade within the concentration range of 2.0?×?10^?7–1.0?×?10^?1?M lead ion. The limit of detection, as determined from the intersection of the extrapolated linear segments of the calibration plot, was 8.0?×?10^?8 M. The electrode exhibited high selectivity for Pb (II). The response time of the electrode was about 5–10?s for different concentrations. The electrode is suitable for use in aqueous solutions in a pH range of 5.0–7.5. It was used as an indicator electrode in a titration of Pb (II) with chromate at constant pH. This electrode was used for the determination of lead in ore samples, and the results were in agreement with those obtained with an atomic absorption spectroscopy (AAS) method. Also lead selective electrode was used for monitoring of lead in spiked samples of the Zayanderud River and waste water by the potentiometry technique.     

Highly functionalized pyrazolines from symmetric and asymmetric 1,2-disulfonylhydrazines: a combination of experimental and DFT perspectives

Chemistry of Heterocyclic Compounds - In this work, new pyrazole derivatives were prepared by one-pot three-component reaction emloying symmetric and asymmetric 1,2-disulfonyl-hydrazines,...     

Effect of substituents and encapsulation on the catalytic activity of copper(II) complexes of two tridentate Schiff base ligands based on thiophene: benzyl alcohol and phenol oxidation reactions

Encapsulation of Cu(II) complexes of methyl-2-(2-hydroxybenzylideneamino)-4,5,6,7-tetrahydrobenzo[b]-thiophene-3-carboxylate (HL¹) and 2-ethyl-4-methyl 5-(2-hydroxybenzylideneamino)-3-methylthiophene-2,4-dicarboxylate (HL²) in the supercages of zeolite NaY was performed by the flexible ligand method. The neat and encapsulated complexes were characterized by physicochemical and spectroscopic methods and employed as catalysts for oxidation of benzyl alcohol and phenol. The encapsulated complexes were both more reactive and stable as catalysts than the corresponding free complexes. The encapsulated complexes could be reused several times. Complexes of HL² were more reactive than those of HL¹, probably due to the electron-withdrawing effect of the CO₂Et group.     

Two-atom van der Waals interaction between polarizable/magnetizable atoms near magnetoelectric bodies

The van der Waals potential of two atoms in the presence of an arbitrary arrangement of dispersing and absorbing magnetoelectric bodies is studied. Starting from a polarizable atom placed within a given geometry, its interaction with a second polarizable/magnetizable atom is deduced from its Casimir-Polder interaction with a weakly polarizable/magnetizable test body. The general expressions for the van der Waals potential obtained thusly are illustrated by considering first the case of two atoms in free space, with special emphasis on the interaction between (i) two polarizable atoms and (ii) a polarizable and a magnetizable atom. Furthermore, the influence of magnetoelectric bodies on the van der Waals interaction is studied in detail for the example of two atoms placed near a perfectly reflecting plate or a magnetoelectric half space, respectively. The text was submitted by the authors in English.     

Comparison of Air-Assisted,Vortex-Assisted and Ultrasound-Assisted Dispersive Liquid–Liquid Microextraction for the Determination of BTEX Compounds in Water Samples Prior to GC-FID Analysis

Three new dispersive liquid–liquid microextraction (DLLME) methods, air-assisted (AA-DLLME), vortex-assisted (VA-DLLME) and ultrasound-assisted (UA-DLLME), were compared from the point of view of their analytical application for preconcentration of trace amounts of benzene, toluene, ethylbenzene and xylene isomers (BTEX) in water samples. In all of these methods, no dispersive solvent is required and dispersion of extractant is carried out by air bubbles, vortex and ultrasound for AA-DLLEM, VA-DLLME, and UA-DLLME, respectively. Advantages and disadvantages of these three liquid phase microextraction methods and their capability in dispersion of a similar extractant phase in sample solutions were comprehensively compared. All other extraction parameters, which have an influence on the microextraction, were also investigated and optimized. Under optimized conditions, analytical figures of merit for the three techniques were determined and compared. It was found that the limit of detection of the three methods is almost the same, while AA-DLLME has a wider linear dynamic range and the shortest analysis time. Enrichment factors of 182, 45 and 245 were achieved for AA-DLLEM, VA-DLLME, and UA-DLLME, respectively.