Portable single-sided NMR measurements at variable temperatures: Implementation of a thermo-controlled device and application to the heating of bread dough

A temperature control unit was implemented to vary the temperature of samples studied on a commercial Mobile Universal Surface Explorer nuclear magnetic resonance (MOUSE-NMR) apparatus. The device was miniaturized to fit the maximum MOUSE sampling depth (25 mm). It was constituted by a sample holder sandwiched between two heat exchangers placed below and above the sample. Air was chosen as the fluid to control the temperature at the bottom of the sample, at the interface between the NMR probe and the sample holder, in order to gain space. The upper surface of the sample was regulated by the circulation of water inside a second heat exchanger placed above the sample holder. The feasibility of using such a device was demonstrated first on pure water and then on several samples of bread dough with different water contents. For this, T1 relaxation times were measured at various temperatures and depths and were then compared with those acquired with a conventional compact closed-magnet spectrometer. Discussion of results was based on biochemical transformations in bread dough (starch gelatinization and gluten heat denaturation). It was demonstrated that, within a certain water level range, and because of the low magnetic field strength of the MOUSE, a linear relationship could be established between T1 relaxation times and the local temperature in the dough sample.     

Enumeration of three-dimensional convex polygons

A self-avoiding polygon (SAP) on a graph is an elementary cycle. Counting SAPs on the hypercubic lattice ℤ ^d withd≥2, is a well-known unsolved problem, which is studied both for its combinatorial and probabilistic interest and its connections with statistical mechanics. Of course, polygons on ℤ ^d are defined up to a translation, and the relevant statistic is their perimeter. A SAP on ℤ ^d is said to beconvex if its perimeter is “minimal”, that is, is exactly twice the sum of the side lengths of the smallest hyper-rectangle containing it. In 1984, Delest and Viennot enumerated convex SAPs on the square lattice [6], but no result was available in a higher dimension. We present an elementar approach to enumerate convex SAPs in any dimension. We first obtain a new proof of Delest and Viennot's result, which explains combinatorially the form of the generating function. We then compute the generating function for convex SAPs on the cubic lattice. In a dimension larger than 3, the details of the calculations become very cumbersome. However, our method suggests that the generating function for convex SAPs on ℤ ^d is always a quotient ofdifferentiably finite power series.     

Bis(μ‐acetato‐κ3O,O′:O′)bis[bis(acetato‐κ2O,O′)diaquadysprosium(III)] tetrahydrate

The title compound, [Dy₂(C₂H₃O₂)₆(H₂O)₄]·4H₂O, crystallizes in the form of dimeric units related by an inversion centre. Each cation is nine‐coordinate, binding to two water mol­ecules and three acetate groups, two of which are bidentate and the third tridentate. This last acetate group acts as a bridge between neighbouring metal atoms, leading to an intradimer Dy?Dy separation of 4.170 (1) Å.     

Metallic Particles from Complexing Microcapsules Dispersed in a Silica Gel

A new process to control the distribution of metal nanoparticles is proposed. It involves the use of complexing microcapsules obtained by interfacial polycondensation. The latter are hollow spheres constituted of a polymer membrane, containing an insoluble active ingredient, such as a polyacrylic acid, which can complex Co²⁺ ions. These capsules are dispersed in a silica sol followed by thermal treatments and reduction under H₂ which results in metallic Co nanoparticles confined in the capsules domains. The particles do not diffuse in the matrix.     

Thermodynamic properties of aqueous organic mixtures near the critical demixing: Cases of 2,6-dimethylpyridine and of 2-isobutoxyethanol

Phase diagrams, volumes and heat capacities of aqueous mixtures of 2,6-dimethylpyridine (2,6-L) and 2-isobutoxyethanol (iBE) and activities of 2,6-L in aqueous mixtures were measured in the monophasic region near the lower critical solution temperature (LCST). With 2,6-L some measurement were also made just above the LCST. From the temperature dependence of these data, partial molar relative enthalpies (2,6-L), expansibilities and the temperature derivative of heat capacities were calculated and show that iBE undergoes a microphase transition at low concentration which is not related to the phase separation. On the other hand, the properties of 2,6-L in the water-rich region at temperatures well below the LCST indicates that this solute has only a slight tendency to associate. The heat capacities of 2,6-L show an important increase near the LCST. Such changes are not observed for iBE and other alkoxyethanols and amines since these systems already exist in the form of microphases; the partial molar properties of iBE near the LCST are nearly equal to the molar values of the pure liquid, and the changes in thermodynamic properties corresponding to the macroscopic phase transition, are therefore too small to be measured by the present techniques.     

Development and validation of methods for the trace determination of phthalates in sludge and vegetables

A routine method which is simple, quick and precise has been set up and validated for phthalate analysis in environmental samples (tomato plants and sewage sludges). Six phthalates have been studied simultaneously: dimethylphthalate, diethylphthalate, di-n-butylphthalate, n-butylbenzylphthalate, di-2-ethyl-hexyl phthalate (DEHP) and di-n-octylphthalate. Optimization of sample, solvent extraction uses a Soxtec apparatus and extract purification with an a solid-phase extraction cartridge allows between 90 and 110% recovery of phthalates. Precise, sensitive and selective identification and quantifying of analytes is by GC-MS in the single ion monitoring mode. This protocol allows analytes with concentrations as low as 10 microg/kg dry matter (DM) to be determined from small (1-2 g DM) samples. This analytical method has been applied to the phthalate transfer study for agricultural recycling of sludges, where phthalate bioavailability has been studied in aquiculture using two types of experiments. Tomatoes have been grown in containers where the trace organics have been directly introduced as pure substances, and in a second experiment under the same growth conditions, sewage sludge has replaced the pure substances. Transfer of these trace organics has been followed into the various parts of the tomato plant and in general only the DEHP is worthy of note although its percentage transfer remains very low even in an experiment designed to maximize this.     

Co(II)5(OH)6(SO4)2(H2O)4: the first ferromagnet based on a layered cobalt-hydroxide pillared by inorganic...OSO3-Co(H2O)4-O3SO..

The synthetic mineral Co(II)5(OH)6(SO4)2(H2O)4 (1), obtained by hydrothermal reaction of CoSO4.7H2O and NaOH at 165 degrees C and consisting of brucite-like Co4(OH)6O2 layers pillared by OSO3-Co(H2O)4-O3SO, is a ferromagnet (T(Curie)= 12 K, Hc= 580 Oe).     

Synthesis, nuclear, and magnetic structures and magnetic properties of [Mn3(OH)2(SO4)2(H2O)2

[Mn(3)(OH)(2)(SO(4))(2)(H(2)O)(2)] and its deuterated analogue were synthesized by a hydrothermal technique and characterized by differential thermal analysis, thermogravimetric analysis, and IR spectroscopy. Its nuclear structure, determined by single-crystal X-ray analysis and Rietveld analysis of neutron powder-diffraction data, consists of a 3D network of chains of edge-sharing Mn(1)O(6), running along the c axis, connected by the apices of Mn(2)O(6) and SO(4) units. It is isostructural to the nickel analogue. Determination of the magnetic structure and measurements of magnetization and heat capacity indicate the coexistence of both magnetic long-range ordering (LRO) and short-range ordering (SRO) below a Néel temperature of 26 K, while the SRO is retained at higher temperatures. The moments of the two independent Mn atoms lie in the bc plane, and that of Mn(1) rotates continuously by 54 degrees towards the c axis on decreasing the temperature from 25 to 1.4 K. While the SRO may be associated with frustration of the moments within a Mn(3) trimer, the LRO is achieved by antiparallel alignment of the four symmetry-related trimers within the magnetic unit cell. A spin-flop field, measured by dc and ac magnetization on a SQUID, is observed at 15 kOe.