Long-wavelength light emission from InAs quantum dots covered by GaAsSb grown on GaAs substrates

We fabricated InAs quantum dots (QDs) with a GaAsSb strain-reducing layer (SRL) on a GaAs(0 0 1) substrate. The wavelength of emission from InAs QD is shown to be controllable by changing the composition and thickness of the SRL. An increase in photoluminescence intensity with increasing compositions of Sb and thickness of the GaAsSb SRL is also seen. The efficiency of radiative recombination was improved under both conditions because the InAs/GaAsSb/GaAs hetero-interface band structure more effectively suppressed carrier escape from the InAs QDs.     

DNA-conjugated polymers for self-assembled DNA chip fabrication.

We developed two DNA-conjugated polymers, one based on polyallylamine and the other on polyacrylic acid, for use in DNA chips. A 30-mer single-stranded DNA probe and thioctic acid were covalently attached to polyallylamine as sidechains. The same single-stranded DNA and 3-(pyridyldithio)propionyl hydrazide were covalently attached to polyacrylic acid as sidechains. Both DNA-conjugated polymers could be specifically immobilized onto a gold sensor substrate by a self-assembly technique. The interactions between fully matched DNA and each DNA-conjugated polymer were investigated by surface plasmon resonance. A gold surface modified with either DNA-conjugated polymer recognized fully matched DNA much better than unmatched DNA. The hybridization selectivity and efficiency of DNA-conjugated polyallylamine was optimized by adjusting the pH so as to reduce the effects of cationic polymer sidechains. The hybridization selectivity and efficiency of DNA-conjugated polymers were higher than those of a conventional immobilized thiol-based DNA. The coating of DNA-conjugated polymers reduced nonspecific adsorption of DNA by the gold substrate. DNA-conjugated polyacrylic acid was more selective toward fully matched DNA than was DNA-conjugated polyallylamine. Therefore, DNA-conjugated polymers show promise for application in novel DNA chips.     

A globally convergent Newton method for solving strongly monotone variational inequalities

Variational inequality problems have been used to formulate and study equilibrium problems, which arise in many fields including economics, operations research and regional sciences. For solving variational inequality problems, various iterative methods such as projection methods and the nonlinear Jacobi method have been developed. These methods are convergent to a solution under certain conditions, but their rates of convergence are typically linear. In this paper we propose to modify the Newton method for variational inequality problems by using a certain differentiable merit function to determine a suitable step length. The purpose of introducing this merit function is to provide some measure of the discrepancy between the solution and the current iterate. It is then shown that, under the strong monotonicity assumption, the method is globally convergent and, under some additional assumptions, the rate of convergence is quadratic. Limited computational experience indicates the high efficiency of the proposed method.     

Self-assembled DNA-conjugated polymer for novel DNA chip.

We developed DNA-conjugated polymer for DNA chip fabrication. A 30 mer probe DNA and disulfide bridges were covalently attached to the polymer side chain. The DNA-conjugated polymer can be specifically adsorbed on a gold substrate surface by a self-assembly technique. The interaction between fully matched DNA and DNA-conjugated polymer was investigated by surface plasmon resonance (SPR) technique. The DNA-conjugated polymer-modified gold surface highly recognized fully matched DNA, rather than unmatched DNA. Therefore, DNA-conjugated polymer can be used for novel DNA chip fabrication.     

Application of negative chemical ionization mass spectrometry to the structure elucidation of perfluorochemicals and related compounds

The negative chemical ionization mass spectra of representative perfluorinated alkanes, cycloalkanes, ethers and tertiary amines have been examined, using Ar at about 0.5 torr as the reagent gas. The compounds chosen are typical of those under study as components of fluorochemical emulsion blood substitutes. Many such PFC's, particularly those with cyclic or branched structures, give intense molecular ions; most give simple spectra with a few major fragment ions at high mass, in marked contrast to the EI spectra which are dominated by m/e 69 (CF₃+) and 131 (C₃F₅+) of no value for structure elucidation. NCI-GC/MS is more sensitive than conventional EI-GC/MS and promises to be more generally useful for structure determination. Specific examples from the various classes will be presented, and their NCI and EI mass spectra compared.     

Synthesis of large macrocyclic tetraaza compounds with a methylene backbone: Cyclo[-NH- (CH2)n-]4, (n = 6, 7, 8, 9 and 10). The formation of 28-, 32-, 36-, 40- and 44-membered rings

A series of macrocyclic tetraamines with 28-, 32-, 36-, 40- and 44-membered rings have been efficiently prepared from the corresponding ditosylamide and monobromoalcohol derivatives in 6 steps via a double condensation reaction. Overall yields were: 41, 41, 46, 29, and 33%, respectively, for 1,8,15,22-tetraazacyclooctacontane ( 11a ), 1,9,17,25-tetraazacyclodotriacontane ( 11b ), 1,10,19,28-tetraazacyclohexatriacontane ( 11c ), 1,11,21,31-tetraazacyclotetracontane ( 11d ) and 1,12,23,34-tetraazacyclotetratetracontane ( 11e ).     

In Situ Processing of Nano Crystalline Oxide Particles/Polymer Hybrid

Nano sized crystalline particles/polymer hybrids were synthesized form designed metal-organic precursors. The newly developed method is composed of the synthesis of organic matrix by polymerization and the in situ nucleation and growth of crystalline oxide particles in the organic matrix below 100°C. The design of metal-organic precursor modified with polymerizable ligand and the selection of reaction conditions does influence the size and crystallinity of ceramic particles in organic matrix. The nano-sized magnetic particle/polymer hybrid exhibits the interesting feature of superparamagnetism and quantum size effect. The crystalline particles of BaTiO₃/, PbTiO₃/, and KNbO₃/polymer hybrids behave to be dielectric and show the typical electro-rheological behavior.     

Synthesis, properties, and crystal structure of a novel anthracene-bridged molybdenum-zinc porphyrin dimer

The synthesis and properties of novel anthracene-bridged porphyrin dimers having an oxomolybdenum(V) porphyrin unit, H(2)(DPA)[Mo(V)O(OMe)] (1) and (DPA)[Mo(V)O(OMe)][Zn(II)(MeOH)] (2), and the relevant monomer porphyrin complexes Mo(V)O(MPP)OMe (3) and Zn(II)(MPP) (4) are presented. An oxomolybdenum(V) unit was introduced into one of the two porphyrins in DPA to give 1, which has a free-base porphyrin unit. By introducing a zinc(II) ion to the free-base part, a mixed-metal complex of 2 was prepared and isolated. The structure of 2 was analyzed by X-ray crystallography (2.(7)/(6)CH(2)Cl(2), triclinic, P(-)1 (no. 2), a = 15.2854(12) A, b = 19.9640(15) A, c = 13.6915(12) A, alpha = 90.968(3), beta = 113.108(4), gamma = 96.501(4), Z = 2, R1 = 9.9, wR2 = 19.2). The structure of 2 demonstrated that a methanol is stably coordinated to the Zn(II) ion with the aid of a hydrogen bond to the methoxo ligand on the Mo(V) ion in the binding pocket of DPA. The electrochemical measurements of 2 suggested that the methanol was kept in the pocket of DPA in solution even at the reduced state of the molybdenum ion.     

Palladium-catalyzed aminoallylation of activated olefins with allylic halides and phthalimide

The three-component aminoallylation reaction of the activated olefins 2 with the phthalimide 1a and allyl chloride proceeded very smoothly in the presence of Pd(2)dba(3).CHCl(3) (5 mol %)/P(4-FC(6)H(4))(3) (40 mol %) and Cs(2)CO(3) (3 equiv against 2) in dichloromethane at room temperature to give the corresponding aminoallylated products, N-pent-4-enylphthalimides 3, in 58-99% yields. The reaction of oxazolidinone 1b also proceeded very smoothly to give N-(2,2-dicyano-1-phenylpent-4-enyl)oxazolidinone in a quantitative yield; however, the Tsuji-Trost-type allylation products 4 were obtained in the case of dibenzylamine, N-tosylaniline, and pyrrolidin-2-one. Further, 2 underwent cycloaddition with N-tosylvinylaziridine 9a in the presence of Pd(2)dba(3).CHCl(3) (5 mol %)/P(4-FC(6)H(4))(3) (40 mol %) in THF at room temperature, giving the corresponding pyrrolidines 11 in 69-99% yields.     

Alkane Oxidation with Molecular Oxygen Using a New Efficient Catalytic System: N-Hydroxyphthalimide (NHPI) Combined with Co(acac)(n)() (n = 2 or 3)

A novel class of catalysts for alkane oxidation with molecular oxygen was examined. N-Hydroxyphthalimide (NHPI) combined with Co(acac)(n)() (n = 2 or 3) was found to be an efficient catalytic system for the aerobic oxidation of cycloalkanes and alkylbenzenes under mild conditions. Cycloalkanes were successfully oxidized with molecular oxygen in the presence of a catalytic amount of NHPI and Co(acac)(2) in acetic acid at 100 degrees C to give the corresponding cycloalkanones and dicarboxylic acids. Alkylbenzenes were also oxidized with dioxygen using this catalytic system. For example, toluene was converted into benzoic acid in excellent yield under these conditions. Ethyl- and butylbenzenes were selectively oxidized at their alpha-positions to form the corresponding ketones, acetophenone, and 1-phenyl-1-butanone, respectively, in good yields. A key intermediate in this oxidation is believed to be the phthalimide N-oxyl radical generated from NHPI and molecular oxygen using a Co(II) species. The isotope effect (k(H)/k(D)) in the oxidation of ethylbenzene and ethylbenzene-d(10) with dioxygen using NHPI/Co(acac)(2) was 3.8.