彩色透明微晶玻璃的吸收光谱

在Li2O-Al2O3-SiO2系统玻璃中掺入少量晶核剂TiO2,ZrO2,P2O5，再掺入稀土离子和过渡金属离子作为着色剂，在高温下溶制得到彩色透明玻璃，对上述玻璃进行微晶化处理，用差热分析（DTA）确定其晶化温度，测定与讨论了所获彩色透明微晶玻璃在紫外波段至近红外波段的吸收光谱特性，研究结果表明，玻璃微晶化后，由于基质玻璃对光的微弱散射，引起吸收的增强，但不改变稀土离子和过渡金属离子的本征吸收峰位。     

New Synthetic Method for Industrial Manufacture of Glutaric Dialdehyde

A new synthetic method for the manufacture of glutaric dialdehyde is investigated. Glutaric dialdehyde was prepared by the addition-hydrolysis reaction of benzimidazolium salt with saturated dihalide as the di-Grignard reagent. The yield of glutaric dialdehyde by this method can reach 73%. Both infrared spectra and melting point of the compound were consistent with those reported earlier. Translated from Journal of Northwest University (Natural Science Edition), 2005, 35(2) (in Chinese)     

Strongly Modular Subgroup in Finite Group

Ｓｔｒｏｎｇｌｙ　Ｍｏｄｕｌａｒ　Ｓｕｂｇｒｏｕｐ　ｉｎ　Ｆｉｎｉｔｅ　ＧｒｏｕｐＳｔｒｏｎｇｌｙＭｏｄｕｌａｒＳｕｂｇｒｏｕｐｉｎＦｉｎｉｔｅＧｒｏｕｐ￥ＹｕＪｉａｎｌｉ；ＪｉａｏＤｏｎｇｗｕ（ＬｕｏｙａｎｇＩｎｓｔｉｔｕｔｅｏｆＴｅｃｈｎｏｌｏｇ...     

Rebuilding of metal components with laser cladding forming

Laser cladding forming (LCF) is a novel powerful tool for the repairing of metal components. Rebuilding of V-grooves on medium carbon steel substrates has been carried out with laser cladding forming technique using stainless steel powder as the cladding material. Microstructure of the deposited layers has been characterized using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray microanalysis (EDAX), electron probe microanalysis (EPMA) and X-ray diffraction (XRD). Mechanical properties of the rebuilt V-groove samples have been evaluated by tensile and impacting tests and microhardness measurement. Experimental results show that good fusion bonding between the rebuilt layers and the substrate has been formed, and the microstructure of the cladding layers is mainly composed of fine, dense and defect-free epitaxial columnar dendrites. Due to the effect of grain size refinement, the tensile strength, impacting toughness, elongation and microhardness of the rebuilt samples have been greatly enhanced compared to those of the substrate. Microhardness is also very uniform throughout the rebuilt regions. With the growth of the deposited layers, the microhardness increases gradually. The good ductility of the deposited regions is verified by the SEM fracture analysis.     

Zn∶Er∶LiNbO_3单晶的坩埚下降法生长及光谱特性

报道了Zn∶Er∶LiNbO3单晶的坩埚下降法生长工艺。通过控制晶体生长固液界面的温度梯度(30~35℃.cm-1)、晶体的生长速度(0.8~1.5 mm.h-1)、密闭Pt坩埚等条件生长了宏观无缺陷的Zn2+(3%)和Er3+(0.6%)共掺的LiNbO3单晶。用X射线衍射(XRD)和差热分析(DTA)表征了获得的晶体,并测量了晶体不同部位的吸收光谱和荧光谱。从吸收光谱以及由XRD数据计算所得的晶胞参数推断,沿生长方向Er3+在晶体中的浓度分布逐步减少。光谱数据表明,晶体底部样品的吸收强度和荧光强度要比顶部大,而对应于Er3+上能级4S3/2和2H11/2跃迁至基态4I15/2的绿光发射,晶体底部却比顶部表现出更高的上转换效率。从晶体的内部结构、缺陷情况以及Er3+的分凝现象解释了产生上述现象的内在机制。     

粘度法预测聚乙二醇/壳聚糖体系的相容性

甲壳素在自然界的含量很大，仅次于纤维素，是一种颇具应用潜力的天然高分子．可由甲壳素经脱酸基化制得壳聚糖．由于其分子中存在氨基，因此能溶解干酸性水溶液中，并以聚电解质的形式存在，近来用壳聚糖制得的纤维膜应用于药物、食品等的分离和纯化、污水的处理，分离效果好，且不带入任何化学杂质．在壳聚糖纤维膜制作及与纤维的混纺过程中，都要探讨它与其它相应高聚物的相容性[1]．我们以相容的壳聚糖（chitosan）／聚乙二醇（PEG）体系为例，采用粘度法讨论其分子间的相互作用，并预测它们的相容性．壳聚糖的基本结构为1实验部分1.1…     

Zn:Er:LiNbO3单晶的坩埚下降法生长及光谱特性

报道了ZnErLiNbO3单晶的坩埚下降法生长工艺. 通过控制晶体生长固液界面的温度梯度(30～35 ℃·cm-1)、晶体的生长速度(0.8～1.5 mm·h-1)、密闭Pt坩埚等条件生长了宏观无缺陷的Zn2+(3%)和Er3+(0.6%)共掺的LiNbO3单晶. 用X射线衍射(XRD)和差热分析(DTA)表征了获得的晶体, 并测量了晶体不同部位的吸收光谱和荧光谱. 从吸收光谱以及由XRD数据计算所得的晶胞参数推断, 沿生长方向Er3+在晶体中的浓度分布逐步减少. 光谱数据表明, 晶体底部样品的吸收强度和荧光强度要比顶部大, 而对应于Er3+上能级4S3/2和2H11/2跃迁至基态4I15/2的绿光发射, 晶体底部却比顶部表现出更高的上转换效率. 从晶体的内部结构、缺陷情况以及Er3+的分凝现象解释了产生上述现象的内在机制.     

Er:Yb:KGW激光晶体生长及缺陷研究

采用顶部籽晶(TSSG)法生长ErYbKGW晶体.通过研究助熔剂的种类、组成与溶质的比例关系对晶体生长的影响,设计了合理的工艺条件转速30～40 r·min-1;拉速1～2 mm·d-1;降温生长速率0.05 ℃·h-1;降温速率15 ℃·h-1;生长周期15～20 d.通过对晶体缺陷的观察分析认为,晶体裂缝及包裹物等缺陷与生长工艺条件密切相关,应尽量减少生长过程中的温度、浓度及生长速度的波动,保持晶体的稳态生长.     

Global Stability to Steady Supersonic Rayleigh Flows in One-Dimensional Duct∗

Heat exchange plays an important role in hydrodynamical systems, which is an interesting topic in theory and application. In this paper, the authors consider the global stability of steady supersonic Rayleigh flows for the one-dimensional compressible Euler equations with heat exchange, under the small perturbations of initial and boundary conditions in a finite rectilinear duct.     

Yb3+:KY(WO4)2晶体生长与光谱性能

采用泡生法生长YbKYW晶体, 通过XRD分析确认所生长的晶体为β-YbKYW. TG-DTA测量结果表明, 晶体的熔点为1045 ℃, 相变温度为1010 ℃. 测得晶体红外光谱和拉曼光谱, 对其峰值所属振动的归属进行了指认, 并测量了晶体的吸收光谱和荧光光谱. 结果表明, YbKYW晶体在940, 980 nm附近有很强的吸收峰, 主峰980 nm处的吸收截面积为1.34×10-19 cm2;该晶体在990, 1010, 1030 nm附近都有较强的荧光发射峰, 其中最强发射峰1030 nm的发射线宽高达16 nm, 有望作为可调谐激光器的增益介质. 计算得其1030 nm受激发射截面积为3.1×10-20 cm2.