A gadolinium-based magnetic ionic liquid for supramolecular dispersive liquid–liquid microextraction followed by HPLC/UV for the determination of favipiravir in human plasma

Favipiravir is a potential antiviral medication that has been recently licensed for Covid-19 treatment. In this work, a gadolinium-based magnetic ionic liquid was prepared and used as an extractant in dispersive liquid–liquid microextraction (DLLME) of favipiravir in human plasma. The high enriching ability of DLLME allowed the determination of favipiravir in real samples using HPLC/UV with sufficient sensitivity. The effects of several variables on extraction efficiency were investigated, including type of extractant, amount of extractant, type of disperser and disperser volume. The maximum enrichment was attained using 50 mg of the Gd-magnetic ionic liquid (MIL) and 150 μl of tetrahydrofuran. The Gd-based MIL could form a supramolecular assembly in the presence of tetrahydrofuran, which enhanced the extraction efficiency of favipiravir. The developed method was validated according to US Food and Drug Administration bioanalytical method validation guidelines. The coefficient of determination was 0.9999, for a linear concentration range of 25 to 1.0 × 10⁵ ng/ml. The percentage recovery (accuracy) varied from 99.83 to 104.2%, with RSD values (precision) ranging from 4.07 to 11.84%. The total extraction time was about 12 min and the HPLC analysis time was 5 min. The method was simple, selective and sensitive for the determination of favipiravir in real human plasma.     

k-Hankel Gabor Transform and Its Applications to the Theory of Localization Operators

Analysis Mathematica - We introduce and study the k-Hankel Gabor transform. We investigate the localization operators for this transform. In particular, we study their trace class properties and we...     

Montmorillonite KSF-Catalyzed Synthesis of 2,2′-(Arylmethylene)bis(3-hydroxy-5,5-dimethylcyclohex-2-en-1-ones) for the Functionalization of MCM-41 Silica Nanoparticles

Russian Journal of Organic Chemistry - A green protocol has been developed for the preparation of 2,2′-(arylmethylene)bis(3-hydroxy-5,5-dimethylcyclohex-2-en-1-ones) following the...     

A survey of surface tension,molar volume and density for Sn–Ag–Cu–Bi–Sb quinary alloys as lead-free solders

ABSTRACT

By applying the geometric models and the theoretical equation, the surface tension, the molar volume and the density were studied. The empirical calculations were carried out in temperature range 623?K?≤?T?≤?1123?K. Only few thermophysical properties were estimated for eight quinary alloys: Sn3.55Ag0.5Cu3Bi3Sb, Sn3.48Ag0.5Cu3Bi5Sb, Sn3.48 Ag0.5Cu5Bi3Sb, Sn3.40 Ag0.5Cu5Bi5Sb, Sn3.53Ag1Cu3Bi3Sb, Sn3.46Ag1Cu3Bi5Sb, Sn3.46Ag1Cu5Bi3Sb, Sn3.38Ag1Cu5Bi5Sb. The results show that surface tension and density have a linear appearance for all temperatures. We have also studied the influence of the composition and temperature in the studied alloys. The obtained theoretical results are compared with the experimental ones and with the conventional Pb–Sn welds.     

Synthesis,characterization, and transport properties of Nafion-polypyrrole membrane for direct methanol fuel cell (DMFC) application

Journal of Solid State Electrochemistry - Due to their distinctive chemical, electronic, and environmental properties, polypyrrole is used as a blocking barrier for methanol leakage in direct...     

Light and heat control over secondary structure and amyloid-like fiber formation in an overcrowded-alkene-modified Trp zipper

The external photocontrol over peptide folding, by the incorporation of molecular photoswitches into their structure, provides a powerful tool to study biological processes. However, it is limited so far to switches that exhibit only a rather limited geometrical change upon photoisomerization and that show thermal instability of the photoisomer. Here we describe the use of an overcrowded alkene photoswitch to control a model β-hairpin peptide. This photoresponsive unit undergoes a large conformational change and has two thermally stable isomers which has major influence on the secondary structure and the aggregation of the peptide, permitting the phototriggered formation of amyloid-like fibrils.     

The Landscape of the Spiked Tensor Model

We consider the problem of estimating a large rank-one tensor u ^⊗k ∈ (ℝⁿ)^⊗k , k ≥ 3 , in Gaussian noise. Earlier work characterized a critical signal-to-noise ratio λ  _Bayes = O(1) above which an ideal estimator achieves strictly positive correlation with the unknown vector of interest. Remarkably, no polynomial-time algorithm is known that achieved this goal unless λ ≥ Cn^{(k − 2)/4} , and even powerful semidefinite programming relaxations appear to fail for 1 ≪ λ ≪ n^{(k − 2)/4} . In order to elucidate this behavior, we consider the maximum likelihood estimator, which requires maximizing a degree-k homogeneous polynomial over the unit sphere in n dimensions. We compute the expected number of critical points and local maxima of this objective function and show that it is exponential in the dimensions n , and give exact formulas for the exponential growth rate. We show that (for λ larger than a constant) critical points are either very close to the unknown vector u or are confined in a band of width Θ(λ^{−1/(k − 1)}) around the maximum circle that is orthogonal to u . For local maxima, this band shrinks to be of size Θ(λ^{−1/(k − 2)}) . These “uninformative” local maxima are likely to cause the failure of optimization algorithms. © 2019 Wiley Periodicals, Inc.     

Chromatic and opto-mechanical dispersion of some characteristic parameters of optical fiber undergoing macrobending

Bending of optical fiber leads to an induced-anisotropy in the index profile that influences many important guiding fiber parameters. An analytical method is described for the measurement of refractive-index-wavelength dispersion in bent optical fibers. Multiple-beam Fizeau fringes technique at transmission is used to analyze the opto-mechanical properties and induced-index anisotropy in a standard single-mode fiber undergoes pure mechanical macrobending. The shift in Fizeau fringes is employed to evaluate the dispersion of the cladding material of the bent fiber. The radial variations in Cauchy’s coefficients and the associated variations of some fiber parameters due to macrobending are carried out. The radial profiles of some material parameters such as oscillation energy, dispersion energy, lattice energy and material dispersion are measured as well. The presented method is capable to achieve quantitative and qualitative measurements, which is not available with other methods. The method has a good index resolution in the order of 10⁻⁴ and spatial resolution of 1.3 μm.     

Mechanical mixtures of Me (Ni, Pd) Ce oxides and silica-supported heteropolyacids: Role and optimal concentration of each active species in n-hexane isomerization

Catalytic properties of silica-supported heteropolyacids (HPA) in a mechanical mixture with reduced Me-Ce oxides (Me = Ni, Pd) in n-hexane isomerization are studied. The role of each component of the mixed oxides (Ce and, typically, Ni and Pd) and their optimum content has been illuminated: cerium is not only beneficial for eliminating or preventing coke deposition but is also effective for maintaining the Keggin structure of the highly-organized HPA during the reaction and probably allows a better dispersion of the second metal species. Nickel and palladium, present as Ni⁰ and Pd⁰, reinforce the activation of the alkane, which is difficult to obtain by means of a direct attack by an acid, and, thus, enhance noticeably the activity of the catalyst. The best mechanical mixtures are obtained with 30–70 wt % NiCeO-HPW/SiO₂ and 50–50 wt % Pd_0.1CeO-HPW/SiO₂. These mixtures have the highest efficiency for a Ni/(Ni + W) atomic ratio of 0.66 and a Pd/(Pd + W) ratio of 0.40, respectively. Finally, the conversion of n-hexane is in the order HPW > HSiW > HBW, which seems to be consistent with the order of their acid strength as per the literature, but the isomerization selectivity appears to be slightly higher on HSiW. Published in Russian in Kinetika i Kataliz, 2006, Vol. 47, No. 1, pp. 24–28. The text was submitted by the authors in English.     

Generation of UV laser light by stimulated Raman scattering in D2, D2/Ar and D2/He using a pulsed Nd:YAG laser at 355nm

A pulsed Nd:YAG laser at 355nm is used to pump Raman cell filled with D_2, D_2/Ar and D_2/He. With adequately adjusted parameters, the maximum photon conversion efficiency of the first-order Stokes light (S_1, 396.796nm) reaches 33.33% in D_2/Ar and the stability of S_1 in pure D_2 is fairly high, the energy drift being less than 10% when the pump energy drifts in the range of 5%. The conversion efficiency and stability, which are functions of the composition and pressure of the Raman medium and the energy of pump laser, are investigated. The result has been used to optimize the laser transmitter system for a differential absorption lidar system to measure NO_2 concentration profiles.