Synthesis and mesogenic properties of several homologous series of aldose dialkyl dithioacetals. A model for their behaviour

Abstract

Ten homologous series (n-butyl through n-decyl) of aldose S,S-acetals (D-glucose, D-galactose, D-mannose, L-rhamnose, 2-deoxy-D-glucose, D-xylose, D-lyxose, D- or L-arabinose, D-ribose and 2-deoxy-D-ribose) have been prepared. Most of these compounds form thermotropic liquid crystals, the exceptions being the entire L-rhamnose series and some of the derivatives with the shortest alkyl chains. All of the compounds have been investigated with differential scanning calorimetry and polarization microscopy. Some temperature dependent powder X-ray data are also presented. A model is proposed which correlates the carbohydrate configuration with the melting behaviour. On the basis of now available behaviourial characteristics, visual inspection, mixing experiments and precedent, the mesophase is identified as smectic A_d, the partially overlapping carbohydrate moieties being in the centre and the aliphatic chains pointing outward at an angle of about 62°. Despite the intrinsic chirality of all the carbohydrate mesogens, no evidence for chiral mesophases was found, not even after introduction of a homochiral branched alkyl chain.     

Waterborne polyesters partially based on renewable resources

A new experimental approach for preparing biobased, water‐soluble polyesters (PEs) via titanium(IV) n‐butoxide‐catalyzed bulk polycondensation is presented. In the described method polymers were obtained from isosorbide, maleic anhydride and poly(ethylene glycol) (PEG). The chemical structure of the synthesized PEs was confirmed using 2D NMR spectroscopy and by titration methods. Careful analysis of 2D NMR spectra viz. correlation spectra (COSY), heteronuclear single quantum correlation spectra (HSQC) and heteronuclear multiple‐bond correlation spectra (HMBC) allowed to accomplish the complete proton assignment of isosorbide, PEG, and unsaturated acid residues in the PEs. Moreover, by using NMR spectroscopy the transformation of maleic anhydride into fumaric acid ester and the absence of maleic acid ester units in the final polymer were proven. However, during polycondensation part of the unsaturated bonds has reacted in a Michael addition with isosorbide or PEG. Gel permeation chromatography measurements revealed that the unsaturated PEs have M_n values in the range 3000–5000 g/mol. These PEs, with a low content of carboxylic acid end groups, exhibited sufficient thermal resistance for practical applications, for example, as free radical curable coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Polyamide 6‐polycaprolactone multiblock copolymers: Synthesis,characterization, and degradation

This work describes the synthesis and characterization of polyamide 6 (PA 6)‐polycaprolactone (PCL) multiblock copolymers. Low molar mass, fully amine end‐capped PA 6 was prepared by the addition of a diamine monomer during ε‐caprolactam polymerization. A low molar mass PCL was selected to be incorporated as the biodegradable block and was fully end‐capped with toluene 2,4‐diisocyanate. End group analysis and molecular weight characterizations were performed for both end‐functionalized polymers by SEC, NMR and titration analysis. Incorporation of PCL into PA 6 was mainly achieved by solution mixing of the two end‐functional blocks and, was continued after the removal of the solvent with solid state polymerization (SSP) by gradual heating until about 40 °C below the melting temperature of the PA 6. Molecular weights started to grow immediately during solution mixing and only increased marginally during the SSP treatment. FTIR and SEC studies confirmed the reaction between the two components. DSC data, in combination with the enhanced molar mass during solution mixing pointed to a blocky microstructure, for which distinct melting and crystallization temperatures were observed for the PCL and the PA 6 blocks. Hydrolytic and enzymatic degradation studies were performed at 25 °C where the degree of degradation was followed by weight loss analysis, SEM and SEC. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Theoretical analysis of hydrostatic implodable volumes with solid inner structures

The basic analytical theory for hydrostatically caused implosions of spherical volumes, which has been known for nearly a century, has been extended for the treatment of annular volumes with solid inner structures. Theoretical analyses are developed that treat the inner structure as infinitely hard, elastically deformable, plastically deformable or shattering under the influence of the pressure from the surrounding implosion event. Parametric studies are made of the effect that the inner structure's geometric and material properties have on the pressure field of the surrounding water. It is concluded that the pressure waves produced by the imploding volume are significantly affected by the existence of an inner structure and the inner structure's physical properties. This is an important consideration in assessing the effect of an underwater implosion event on nearby structures.     

Catalytic reaction mechanism of Mn-doped nanoporous aluminophosphates for the aerobic oxidation of hydrocarbons

In this work we apply state-of-the-art electronic-structure-based computational methods based on hybrid-exchange density functional theory to study the mechanism of the aerobic oxidation of hydrocarbons catalysed by Mn-doped nanoporous aluminophosphates (Mn-AlPOs). We compare our results with available experimental data. We show that the catalytic efficiency of Mn-AlPOs in oxidation reactions is intrinsically linked to 1) the Mn redox activity, in particular between 2+ and 3+ oxidation states, and 2) the coordinative insaturation of tetrahedral Mn embedded in AlPO frameworks, which facilitates the reaction by stabilising oxo-type radicals through the formation of Mn complexes. Our mechanism demonstrates the crucial role of both Mn(III) and Mn(II) in the reaction mechanism: Mn(III) sites undergo an initial reaction cycle that leads to the production of the alkyl hydroperoxide intermediate, which can only be transformed into the oxidative products (alcohol, aldehyde and acid) by Mn(II). A preactivation step is required to yield the reduced Mn(II) sites able to decompose the hydroperoxide intermediates; this step takes place through a transformation of the hydrocarbon into the corresponding peroxo-derivative, stabilised by forming a complex with Mn(III) and yielding at the same time reduced Mn(II) sites. Both species enter a subsequent propagation cycle in which Mn(II) catalyses the dissociation of the hydroperoxide that proceeds until the formation of the oxidative products by two parallel pathways, through alkoxy- or hydroxy-radical-like intermediates, whilst the Mn(III)-peroxo complex enables further production of the hydroperoxide intermediate.     

Unsaturated,biobased polyesters and their cross‐linking via radical copolymerization

Biobased, unsaturated polyesters derived from isosorbide, maleic anhydride, and succinic acid were synthesized and characterized. The presence of maleic anhydride units in the structure of the polyesters allowed converting them into cured coatings by radical copolymerization with crosslinking agents such as 2‐hydroxyethyl methacrylate, N‐vinyl‐2‐pyrrolidinone, acrylic acid or methacrylamide. The investigated polyesters were obtained via bulk polycondensation, catalyzed by titanium(IV) n‐butoxide. 2D NMR and MALDI‐Tof‐MS spectroscopy proved that this polymerization resulted in isomerization of maleic acid units into fumaric ones and in the formation of slightly branched structures by the reaction of isosorbide (end) groups with main chain unsaturated bonds. Moreover, some double bonds proved to have reacted with the condensation by‐product water. The resulting polyesters displayed the expected correlation between variables such as molecular weight and content of unsaturated bonds and their T_g values. Since the thermal properties of the obtained polyesters were appropriate for coating applications, the polymers were crosslinked with unsaturated monomers by radical copolymerization. The crosslinking process was studied using FTIR spectroscopy and by measurements of the soluble part of the cured coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2885–2895, 2010     

Phase equilibrium measurements of structure II clathrate hydrates of hydrogen with various promoters

Phase equilibrium measurements of single and mixed organic clathrate hydrates with hydrogen were determined within a pressure range of 2.0-14.0 MPa. The organic compounds studied were furan, 2,5-dihydrofuran, tetrahydropyran, 1,3-dioxolane and cyclopentane. These organic compounds are known to form structure II clathrate hydrates with water. It was found that the addition of hydrogen to form a mixed clathrate hydrate increases the stability compared to the single organic clathrate hydrates. Moreover, the mixed clathrate hydrate also has a much higher stability compared to a pure hydrogen structure II clathrate hydrate. Therefore, the organic compounds act as promoter materials. The stabilities of the single and mixed organic clathrate hydrates with hydrogen showed the following trend in increasing order: 1,3-dioxolane < 2,5-dihydrofuran < tetrahydropyran < furan < cyclopentane, indicating that both size and geometry of the organic compound determine the stability of the clathrate hydrates.