Laser spectroscopy of the 1s HFS of H-like ions at a bunched beam in the storage ring ESR

The investigation of the 1s HFS provides a good possibility for testing QED effects in a combination of a strong electric and magnetic field. Here, we report about the laserspectroscopic measurements of the ground state hyperfine splitting in ²⁰⁷Pb⁸¹⁺. To handle this M1-transition in the infrared optical regime with its long lifetime, we developed a new detection technique using a bunched ion beam. For the observation of fluorescence light, a new mirror system is adapted to the emission characteristics from an ion beam at relativistic velocities. This revised version was published online in July 2006 with corrections to the Cover Date.     

The effects of the column pressure drop on retention and efficiency in packed and open tubular supercritical fluid chromatography

The effects of the pressure drop across the column on retention and efficiency in SFC have been studied. Numerical methods are described which enable the prediction of hold-up time and pressure drop in both packed and open tubular columns. Predictions of both hold-up time and pressure drop are in good agreement with experimental data. The density gradient along the column can be calculated using the numerical methods and a procedure is described which enables the calculation of the overall capacity factors of the solutes from the density profile in the column. Significant variations of the capacity factor are observed along the column. The effect of the density gradient along the column on local diffusivity and dispersion is studied. The column efficiency in systems with significant pressure drops is affected by changes in: the linear velocity of the mobile phase; the diffusion coefficients; and the capacity factors of the solutes along the column. The overall efficiency of the chromatographic system can be calculated if, as is the case for open tubular columns, adequate plate height equations are available.     

pH sensitivity of Si--C linked organic monolayers on crystalline silicon surfaces.

The electrochemical behavior of Si--C linked organic monolayers is studied in electrolyte-insulator-Si devices, under conditions normally encountered in potentiometric biosensors, to gain fundamental knowledge on the behavior of such Si electrodes under practical conditions. This is done via titration experiments, Mott-Schottky data analysis, and data fitting using a site-binding model. The results are compared with those of native SiO(2) layers and native SiO(2) layers modified with hexamethyldisilazane. All samples display pH sensitivity. The number of Si--OH groups on the alkylated samples is calculated to be less than 0.7 % of that of a pure SiO(2) insulator, which still causes a pH sensitivity of approximately 25 mV per pH unit in the pH range: 4-7. The alkylated samples hardly suffer from response changes during up- and down-going titrations, which indicates that very little oxide is additionally formed during the measurements. The pK(a) values of all samples with monolayers (4.0-4.4) are lower than that of native SiO(2) (6.0). The long-term drift (of approximately 1 mV h(-1)) is moderate. The results indicate that biosensors composed of alkylated Si substrates are feasible if a cross-sensitivity towards pH in the sensor signal is taken into account.     

Biocatalytic asymmetric hydrogen transfer employing Rhodococcus ruber DSM 44541

Nonracemic sec-alcohols of opposite absolute configuration were obtained either by asymmetric reduction of the corresponding ketone using 2-propanol as hydrogen donor or by enantioselective oxidation through kinetic resolution of the rac-alcohol using acetone as hydrogen acceptor employing whole lyophilized cells of Rhodococcus ruber DSM 44541. The microbial oxidation/reduction system exhibits not only excellent stereo- and enantioselectivity but also a broad substrate spectrum. Due to the exceptional tolerance of the biocatalyst toward elevated concentrations of organic materials (solvents, substrates and cosubstrates), the process is highly efficient. The simple preparation of the biocatalyst and its ease of handling turns this system into a versatile tool for organic synthesis.     

SOLVENT-INDUCED PHOTOREVERSIBLE REACTIONS OF C-PHYCOCYANIN FROM SYNECHOCOCCUS SP.

Abstract— C-phycocyanin from Synechococcus sp. ( Anacystis nidulans ) shows photoreversible absorption changes when dissolved in buffer containing 75% ethylene glycol (vol/vol). Irradiation with red light (638 nm) causes a 7.5% decrease in absorbance around the absorption maximum (620 m), while the absorbance around 500 nm increases. Subsequent irradiation with green light (500 nm) partially reverses this change. Final photoreversibility at around 620 nm amounts to ca. 2.5% of the maximum absorbance. These reactions are ascribed to two interconvertible species PC_r and PC_g, the former with a higher absorbance in the red. the latter in the green. The rate of dark reversion from PC_g to PC_r is strongly enhanced by ferricyanide. It is proposed that with this reagent, dark reversion occurs via an oxidized form of PC_g. Furthermore, ferricyanide in the presence of ethylene glycol is capable of reversibly oxidizing part of the chromophores of C-phycocyanin, presumably to a radical. In the absence of ethylene glycol, however, ferricyanide causes total irreversible bleaching of the pigment in the dark. The induced photoreversibility of C-phycocyanin is ascribed to the perturbing action on the protein structure by ethylene glycol in high concentrations. This solvent proved the most suitable perturbant of several compounds tested.     

Supercritical fluid extraction-capillary gas chromatography: On-line coupling with a programmed temperature vaporizer

A simple and versatile system is described for the on-line coupling of SFE to capillary GC. The interfacing consists of a programmed temperature vaporizer (PTV) injector. With this injector it is possible to combine solute trapping, elimination of a high flow of extraction fluid, and quantitative transfer of solutes to the seperation column. The problems caused by impurities in the extraction fluid in on-line SFE-GC are discussed. Simple methods are described for the purification of commercially available carbon dioxide. The trapping efficiency of the PTV injector is studied. Applications of the SFE-PTV-GC system are given for the analysis of polymer anti-degradants, polar compounds, and samples with environmental relevance.     

Investigation of parameters affecting the on-line combination of supercritical fluid extraction with capillary gas chromatography

Two different injectors, a split/splitless injector and a programmed temperature vaporizer (PTV) injector were investigated as the interface in on-line supercritical fluid extraction (SFE)-capillary gas chromatography (cGC). The parameters affecting the chromatographic peak shapes as well as the quantitative performance of the interfaces in on-line SFE-cGC were identified and studied. Particular attention was paid to the case where modified extraction fluids were used. Experiments were performed on two different samples. The first sample consisted of PAHs spiked on sand at different concentration levels. The other sample was a polymeric material.     

Deactivation of silica surfaces with a silanol-terminated polysiloxane; structural sharacterization by inverse gas chromatography and solid-state NMR

Retention gape deactivated with Silicone OV-1701-OH show good chromatographic performance and remarkable stability against water induced stationary phase degradrdation. In an attempt to better understand the findamentals off the deactivation process using silanol terminated polysiloxanes, a fumed silica was deactivated with Silicon OV-1701-OH. In contrast to fused silic capillaries, fumed silica (Aerosil A-200) can be studied by ²⁹Si cross-polarization magic-angle-spinning (CPMAS) NMR, thus serving as a model substrate for fused silica. Retention data from inverse gas chromatography at infinite dilurion and ²⁹Si CP MAS NMR data of five Aerosil phases, differing in residual silanol surface concentration, are correlated with the aim of validating this approach for stationary phase characterization. A comparatively detailed model of the deactivating polymer layer that explains the observed absorption activities is deduced. Surface silanols are shown to play a key role in the polymer layer, the structure of which is of primary importance for the absorption behavior after deactivation. Contrary to common belief, the absolute silanol surface concentration after deativation is only of secondary importance for the overall absorption activity. High silanol surface concentrations enhance degradation of the polysiloxane chains into small cyclic fragments as well as subsequent absorption and immobolization to the silica substrate surface. The mobility of linear polysiloxane chains in the kHz regime (as determined bby NMR cross-polarization dynamics) appears to determine the extent which the residual silanols are accessible for analytes. It is therefore anticipated that there is an optimum silanol surface concentration of fused silica surfaces to be deactivated with silanol terminated polysiloxanes; it should be lazrge enough to adsord polymer fragments, but not large to avoid excessive residual silanol activity.     

Limit of detection estimator for second-order bilinear calibration

A new approach is developed for estimating the limit of detection in second-order bilinear calibration with the generalized rank annihilation method (GRAM). The proposed estimator is based on recently derived expressions for prediction variance and bias. It follows the latest IUPAC recommendations in the sense that it concisely accounts for the probabilities of committing both types I and II errors, i.e. false positive and false negative declarations, respectively. The estimator has been extensively validated with simulated data, yielding promising results.