Rb saturation spectroscopy with an optically narrowed FM diode laser

A fast-frequency modulated (FM) diode laser has been optically narrowed using the technique of resonant optical feedback, to provide linewidths in each FM mode of ≈ 200 kHz peak-to-peak. With a drive frequency of 50 MHz and modulation index of 0.2, the FM laser has been used for the first time to obtain Doppler-free FM spectra of the Rb D₁ line at 795 nm. The potential use of this system for laser frequency stabilisation is discussed.     

Searching for extensible Korobov rules

Extensible lattice sequences have been proposed and studied in [F.J. Hickernell, H.S. Hong, Computing multivariate normal probabilities using rank-1 lattice sequences, in: G.H. Golub, S.H. Lui, F.T. Luk, R.J. Plemmons (Eds.), Proceedings of the Workshop on Scientific Computing (Hong Kong), Singapore, Springer, Berlin, 1997, pp. 209–215; F.J. Hickernell, H.S. Hong, P. L’Ecuyer, C. Lemieux, Extensible lattice sequences for quasi-Monte Carlo quadrature, SIAM J. Sci. Comput. 22 (2001) 1117–1138; F.J. Hickernell, H.Niederreiter, The existence of good extensible rank-1 lattices, J. Complexity 19 (2003) 286–300]. For the special case of extensible Korobov sequences, parameters can be found in [F.J. Hickernell, H.S. Hong, P. L’Ecuyer, C.Lemieux, Extensible lattice sequences for quasi-Monte Carlo quadrature, SIAM J. Sci. Comput. 22 (2001) 1117–1138]. The searches made to obtain these parameters were based on quality measures that look at several projections of the lattice. Because it is often the case in practice that low-dimensional projections are very important, it is of interest to find parameters for these sequences based on measures that look more closely at these projections. In this paper, we prove the existence of “good” extensible Korobov rules with respect to a quality measure that considers two-dimensional projections. We also report results of experiments made on different problems where the newly obtained parameters compare favorably with those given in [F.J. Hickernell, H.S. Hong, P. L’Ecuyer, C. Lemieux, Extensible lattice sequences for quasi-Monte Carlo quadrature, SIAM J. Sci. Comput. 22 (2001) 1117–1138].     

A new trigonometric method of summation and its application to the degree of approximation

The object of the present investigation is to introduce a new trigonometric method of summation which is both regular and Fourier effective and determine its status with reference to other methods of summation (see §2-§4) and also give an application of this method to determine the degree of approximation in a new Banach space of functions conceived as a generalized Holder metric (see §5).     

Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

Design and operation characteristics of a high power transverse flow pulser sustained cw CO2 laser

A transverse flow, transverse discharge cw CO₂ laser in which de discharge is sustained by employing high repetition rate high voltage pulses has been developed. Pulser sustained discharge through electrodes of innovative design provided uniform excitation at electrical input power densities more than 10 W/cc. Laser output power more than 2.5 kW was obtained in a laser gas mixture consisting of 0.5 mbar of CO₂, 16 mbar of N₂ and 38.5 mbar of He. Design details and operational characteristics of this laser are presented.     

Mössbauer studies of EFG of the different57Fe(57Co)-Oxygen configurations in oriented Y−Ba−Cu−O

We have determined the various parameters of the electric field gradient (EFG) for different Fe-oxygen configurations. This was achieved by analyses of a variety of spectra using a procedure which allows fitting of all spectra of oriented 1-2-3 compounds obtained at different tilt angles β simultaneously, taking into account the degree of texture. The use of a point charge model is invalidated because of the high degree of estimated covalence. The Mössbauer parameters are rationalized. The absence of any observed anisotropy of the mean square displacement of the dopant at the Cu(1) site is rather intriguing.     

Determination of the orientation of the electric field gradient at the Cu(1) site from the Mössbauer spectra of textured pellets made of YBa2Cu3O7−δ superconductor

A textured pellet of YBa₂Cu₃O_7?δ was prepared and doped with⁵⁷Co. After subsequent heat treatments the cobalt was found at the two copper sites. The degree of alignment of individual crystallites (about 40%) was determined from the Mössbauer spectrum by using a method developed by the authors [1]. The same method showed that the most characteristic doublet component of such spectra (δ=0.08 mm/s; |ΔE _Q|=1.96 mm/s) is associated with a site, most probably a Cu(1) site, where the EFG is parallel to thec direction of the unit cell. The sign ofV _zz turned out to be negative, giving a negative quadrupole splitting (ΔE _Q=?1.96 mm/s) for that component.     

Operational characteristics and power scaling of a transverse flow transversely excited CW CO<Subscript>2</Subscript> laser

Transverse flow transversely excited (TFTE) CO₂ lasers are easily scalable to multikilowatt level. The laser power can be scaled up by increasing the volumetric gas flow and discharge volume. It was observed in a TFTE CW CO₂ laser having single row of pins as an anode and tubular cathode that the laser power was not increasing when the discharge volume and the gas volumetric flow were increased by increasing the electrode separation keeping the gas flow velocity constant. The discharge voltage too remained almost constant with the change of electrode separation at the same gas flow velocity. This necessitated revision of the scaling laws for designing this type of high power CO₂ laser. Experimental results of laser performance for different electrode separations are discussed and the modifications in the scaling laws are presented.