Diffusion of Gold Nanoparticles in Inverse Opals Probed by Heterodyne Dynamic Light Scattering

The diffusive behavior of nanoparticles inside porous materials is attracting a lot of interest in the context of understanding, modeling, and optimization of many technical processes. A very powerful technique for characterizing the diffusive behavior of particles in free media is dynamic light scattering (DLS). The applicability of the method in porous media is considered, however, to be rather difficult due to the presence of multiple sources of scattering. In contrast to most of the previous approaches, the DLS method was applied without ensuring matching refractive indices of solvent and porous matrix in the present study. To test the capabilities of the method, the diffusion of spherical gold nanoparticles within the interconnected, periodic nanopores of inverse opals was analyzed. Despite the complexity of this system, which involves many interfaces and different refractive indices, a clear signal related to the motion of particles inside the porous media was obtained. As expected, the diffusive process inside the porous sample slowed down compared to the particle diffusion in free media. The obtained effective diffusion coefficients were found to be wave vector-dependent. They increased linearly with increasing spatial extension of the probed particle concentration fluctuations. On average, the slowing-down factor measured in this work agrees within combined uncertainties with literature data.

     

Computational Study of Cage Like (ZnO)12 Cluster Using Hybrid and Hybrid Meta Functionals

Density Functional Theory employing hybrid and M06 functionals in combination with three different basis sets is used to calculate the ground state of a cage like (ZnO)₁₂ nanocluster which has been consistently reported as the more stable cluster for its particular size. B3LYP and B3PW91 hybrid functionals combined with 6‐31+G*, Lanl2dz and SDD basis sets are employed to treat the ZnO molecular system. Alternatively, three M06 functionals in combination with three basis sets are employed in the nanostructure calculations. Results obtained by treating ZnO sodalite cage nanocluster with M06 functionals demonstrated comparable quality to results obtained with hybrid functionals. Within this study, efficient theoretical DFT methods with the widely known hybrid and the recently created M06 meta‐hybrid functionals are employed to study nanostructured ZnO. Our resulting parameters provide a fresh approach performance wise on the different theoretical methods to treat transition metal nanostructures, particularly, ZnO nanoclusters geometry and electronic structure.     

Optofluidic microsystem with quasi-3 dimensional gold plasmonic nanostructure arrays for online sensitive and reproducible SERS detection

Practical applications of chemical and biological detections through surface-enhanced Raman scattering (SERS) require high reproducibility, sensitivity, and efficiency, along with low-cost, straightforward fabrication. In this work, we integrated a poly-(dimethylsiloxane) (PDMS) chip with quasi-3D gold plasmonic nanostructure arrays (Q3D-PNAs), which serve as SERS-active substrates, into an optofluidic microsystem for online sensitive and reproducible SERS detections. The Q3D-PNA PDMS chip was fabricated through soft lithography to ensure both precision and low-cost fabrication. The optimal dimension of the Q3D-PNA in PDMS was designed using finite-difference time-domain (FDTD) electromagnetic simulations with a simulated enhancement factor (EF) of 1.6 × 10⁶. The real-time monitoring capability of the SERS-based optofluidic microsystem was investigated by kinetic on/off experiments through alternatively flowing Rhodamine 6G (R6G) and ethanol in the microfluidic channel. A switch-off time of ∼2 min at a flow rate of 0.3 mL min⁻¹ was demonstrated. When applied to the detection of low concentration malathion, the SERS-based optofluidic microsystem with Q3D-PNAs showed high reproducibility, significantly improved efficiency and higher detection sensitivity via increasing the flow rate. The optofluidic microsystem presented in this paper offers a simple and low-cost approach for online, label-free chemical and biological analysis and sensing with high sensitivity, reproducibility, efficiency, and molecular specificity.     

Quantum Mechanics and Imprecise Probability

An extension of the Born rule, the quantum typicality rule, has recently been proposed [B. Galvan in Found. Phys. 37:1540–1562 (2007)]. Roughly speaking, this rule states that if the wave function of a particle is split into non-overlapping wave packets, the particle stays approximately inside the support of one of the wave packets, without jumping to the others. In this paper a formal definition of this rule is given in terms of imprecise probability. An imprecise probability space is a measurable space endowed with a set of probability measures ℘. The quantum formalism and the quantum typicality rule allow us to define a set of probabilities on (X ^T ,ℱ), where X is the configuration space of a quantum system, T is a time interval and ℱ is the σ-algebra generated by the cylinder sets. Thus, it is proposed that a quantum system can be represented as the imprecise stochastic process , which is a canonical stochastic process in which the single probability measure is replaced by a set of measures. It is argued that this mathematical model, when used to represent macroscopic systems, has sufficient predictive power to explain both the results of the statistical experiments and the quasi-classical structure of the macroscopic evolution.     

Bilirubin photoisomerization products in serum and urine from a Crigler-Najjar type I patient treated by phototherapy

The relative compositions of the photoisomers of bilirubin-1X alpha (4Z, 15Z-bilirubin) in serum and urine of a patient with Crigler-Najjar type I syndrome treated by phototherapy are reported. High-performance liquid chromatography analysis reveals the presence of high serum levels of the configurational bilirubin photoisomer (4Z,15E-bilirubin) before the beginning of phototherapy (between 12 and 16% of the total bilirubin). The configurational photoisomer value increases during phototherapy with blue fluorescent lamps up to a photoequilibrium of about 25%, similar to that obtained in a bilirubin solution in vitro irradiated by the same lamps. This evidence suggests an inefficient serum excretion of the 4Z,15E-bilirubin. Indeed, its average half-life in serum of the Crigler-Najjar patient is found to be about 8 h. No detectable traces of the bilirubin structural isomer, lumirubin, are found in the serum. On the other hand, lumirubin represents the dominant bilirubin isomer excreted in the urine, as both 15Z and 15E configurations. Smaller amounts of 4Z,15E-bilirubin, 4E,15Z-bilirubin and native 4Z,15Z-bilirubin are observed in urine. The presence in urine of 4Z,15Z-bilirubin is probably due to a fast reversion of the configurational photoisomers to their native form. The half-life of the configurational photoisomers in urine kept at 38 degrees C is found to be of the order of a few minutes. Our study indicates that in Crigler-Najjar type I patients, mechanisms exist to excrete all bilirubin photoisomers. The lumirubin pathway seems to contribute markedly to bilirubin excretion in the urine, as occurs in jaundiced babies under phototherapy. However, the contribution of configurational isomers cannot be neglected.     

PCB-based integration of electrochemiluminescence detection for microfluidic systems

This communication presents an instrumental development based on the printed circuit board (PCB) technology to integrate electrochemiluminescence (ECL) analysis in microfluidic systems. PCB gold macro- (10 mm2) and micro- (0.09 mm2) electrodes and two ECL microfluidic devices are designed, fabricated and tested via luminol ECL detection. Potential modulation is performed between 0.7 and 0 V vs. Ag/AgCl for luminol oxidation, thus giving rise to on/off ECL responses in the presence of hydrogen peroxide. Synchronous detection is adopted to allow weak ECL signal recovery at a very low signal-to-noise ratio (SNR). The detection limit obtained with the two ECL microfluidic devices is 50 nM and 100 nM H2O2 for macroelectrodes and microelectrodes, respectively.     

Heterogeneous reactions of epoxides in acidic media

Epoxides have recently been identified as important intermediates in the gas phase oxidation of hydrocarbons, and their hydrolysis products have been observed in ambient aerosols. To evaluate the role of epoxides in the formation of secondary organic aerosols (SOA), the kinetics and mechanism of heterogeneous reactions of two model epoxides, isoprene oxide and α-pinene oxide, with sulfuric acid, ammonium bisulfate, and ammonium sulfate have been investigated using complementary experimental techniques. Kinetic experiments using a fast flow reactor coupled to an ion drift-chemical ionization mass spectrometer (ID-CIMS) show a fast irreversible loss of the epoxides with the uptake coefficients (γ) of (1.7 ± 0.1) × 10(-2) and (4.6 ± 0.3) × 10(-2) for isoprene oxide and α-pinene oxide, respectively, for 90 wt % H(2)SO(4) and at room temperature. Experiments using attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) reveal that diols are the major products in ammonium bisulfate and dilute H(2)SO(4) (<25 wt %) solutions for both epoxides. In concentrated H(2)SO(4) (>65 wt %), acetals are formed from isoprene oxide, whereas organosulfates are produced from α-pinene oxide. The reaction of the epoxides with ammonium sulfate is slow and no products are observed. The epoxide reactions using bulk samples and Nuclear Magnetic Resonance (NMR) spectroscopy reveal the presence of diols as the major products for isoprene oxide, accompanied by aldehyde formation. For α-pinene oxide, organosulfate formation is observed with a yield increasing with the acidity. Large yields of organosulfates in all NMR experiments with α-pinene oxide are attributed to the kinetic isotope effect (KIE) from the use of deuterated sulfuric acid and water. Our results suggest that acid-catalyzed hydrolysis of epoxides results in the formation of a wide range of products, and some of the products have low volatility and contribute to SOA growth under ambient conditions prevailing in the urban atmosphere.     

Exploring the Porosity in Ceramics at the nm Scale: From Understanding Historical Ceramics to Innovative Materials Design

Ceramics are complex objects and a rich source of information: they constitute a large part of the staple memory of past and present human activities. A deep understanding of traditional ceramics is an essential key to designing new ceramic materials. The demanding synthesis of ceramics with fine-tuned properties, such as enhanced mechanical, electrical, optical or magnetic characteristics, must be associated with cutting-edge analysis procedures in order to improve the engineering process. In this context, we describe a neutron-based non-destructive approach to investigating the nanoporosity of an historical pottery matrix as an effective investigation technique for exploring both traditional and advanced ceramic materials.     

Metallkomplexe von Phenylenbistriazeniden: Synthese und Kristallstrukturen von [Cp(CO)2M]2(1,2-PhN3C6H4N3Ph) (M = Mo,W)

Metal Complexes of Phenylenebistriazenides: Synthesis and Crystal Structures of [Cp(CO)₂M]₂(1,2-PhN₃C₆H₄N₃Ph) (M = Mo, W) [Cp(CO)₂M]₂(1,2-PhN₃C₆H₄N₃Ph) [(M = Mo( 1 ), M = W( 2 )] is formed in the reaction of Cp(CO)₃MCl with PhN₃(H)C₆H₄N₃(H)Ph and C₂H₅ONa in a THF/ethanol mixture. 1 crystallizes from toluene as dark red crystals (triclinic, P1 , a = 1 499.3(9) pm, b = 1 734.0(7) pm, c = 1 852.8(8) pm, α = 66.84(3)°, β = 78.25(4)°, γ = 77.19(4)°). The unit cell contains four complexes with two independent complexes in the asymmetric unit, and eight solvent molecules. 2 crystallizes from THF as yellow crystals free from solvent molecules (triclinic, P1 , a = 979.0(5) pm, b = 1 152.8(5) pm, c = 1 475.8(5) pm, α = 98.26(4)°, β = 104.93(4)°, γ = 101.03(4)°, Z = 2). 1 and 2 are discrete molecular complexes with a 1,2-bis(phenyltriazenido)phenylligand, (PhN₃C₆H₄N₃Ph)^2?, chelating the metal atoms of two Cp(CO)₂M units with the N atoms N1 and N3 of both N₃ groups. Due to the sterical pretension of the Cp(CO)₂M units the phenylenebistriazenido ligand deviates strongly from planarity that is found in the metal complexes characterized so far.