Thermoplastic poly(ester‐imide)s derived from anhydride‐terminated polyester prepolymer and diisocyanate

The phase‐separation behavior of thermoplastic poly(ester‐imide) [P(E‐I)] multiblock copolymers, (A‐B)_n, was investigated by a stepwise variation of the imide content. All the multiblock copolymers were synthesized by solution polycondensation with dimethylformamide as a solvent. P(E‐I)s were prepared with anhydride‐terminated polyester prepolymer and diisocyanates. Polyester prepolymers were prepared by the reaction of pyromellitic dianhydride and two different polyols [poly(tetramethylene oxide glycol) (PTMG) and polycaprolactone diol (PCL)]. Structural determination was done with Fourier transform infrared spectroscopy and Fourier transform NMR, and the molecular weight was determined by gel permeation chromatography. The effect of the imide content on the thermal properties of the synthesized P(E‐I)s was investigated by thermogravimetric analysis and differential scanning calorimetry. The polymers were also characterized for static and dynamic mechanical properties. Thermal analysis data indicated that the polymers based on PTMG were stable up to 330 °C in nitrogen atmosphere and exhibited phase‐separated morphology. Polymers based on PCL showed multistage decomposition, and the films derived from them were too fragile to be characterized for static and dynamic mechanical properties. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 341–350, 2004     

Hawking Absorption and Planck Absolute Entropy of Kerr-Newman Black Hole

We find the existence of a quantum thermal effect, “Hawking absorption.” near the inner horizon of the Kerr–Newman black hole. Redefining the entropy, temperature, angular velocity, and electric potential of the black hole, we give a new formulation of the Bekenstein–Smarr formula. The redefined entropy vanishes for absolute zero temperature of the black hole and hence it is interpreted as the Planck absolute entropy of the KN black hole.     

Microfabricated bioreactor chips for immobilised enzyme assays

A microfabricated device is reported that has been designed to permit the in situ packing of a section of channel with enzyme immobilised onto controlled pore glass (CPG). It is fabricated from glass and polydimethylsiloxane and to prevent dead volumes, has dedicated channels for packing the reactor. The device has the advantage of being simple in design, the flow through enzyme reactor channel being simply a widened section of the analyte channel. The system is suitable for both hydrodynamic and electro-osmotic pumping, and is designed such that when the packing is exhausted it can be repacked. Controlled pore glass provides a reproducible none swelling, high porosity medium onto which the enzyme could be immobilised. The large particle size meant that it was vital to optimise the immobilisation procedure in order to achieve acceptable enzyme activity. The microfabricated device was developed with two enzymes of different molecular masses; alkaline phosphatase and xanthine oxidase. The pore size of the CPG was found to be very important for xanthine oxidase, where the 697 Å pore size (120-200 mesh) CPG was found to give the highest activity (18-20% activity retained after immobilisation). The microfabricated device was used for the assay of p-nitrophenyl phosphate and hypoxanthine with spectrophotometric detection at 405 and 470 nm, respectively. The limits of detection were 5 and 8 μM, respectively.     

Mesoporous silica anchored Ru catalysts for highly enantioselective hydrogenation of beta-ketoesters

Recyclable and reusable mesoporous silica anchored Ru catalysts based on 4,4'-substituted BINAPs were synthesized and used for the hydrogenation of beta-alkyl beta-ketoesters with up to 98.6% e.e. and beta-aryl beta-ketoesters with up to 95.2% e.e.     

The [Sn(9)Pt(2)(PPh(3))](2)(-) and [Sn(9)Ni(2)(CO)](3)(-) complexes: two markedly different Sn(9)M(2)L transition metal zintl ion clusters and their dynamic behavior

[Sn(9)Pt(2)(PPh(3))](2)(-) (2) was prepared from Pt(PPh(3))(4), K(4)Sn(9), and 2,2,2-cryptand in en/toluene solvent mixtures. The [K(2,2,2-cryptand)](+) salt is very air and moisture sensitive and has been characterized by ESI-MS, variable-temperature (119)Sn, (31)P, and (195)Pt NMR and single-crystal X-ray diffraction studies. The structure of 2 comprises an elongated tricapped Sn(9) trigonal prism with a capping PtPPh(3), an interstitial Pt atom, a hypercloso electron count (10 vertex, 20 electron) and C(3)(v)() point symmetry. Hydrogenation trapping experiments and deuterium labeling studies showed that the formation of 2 involves a double C-H activation of solvent molecules (en or DMSO) with the elimination of H(2) gas. The ESI-MS analysis of 2 showed the K[Sn(9)Pt(2)(PPh(3))](1)(-) parent ion, an oxidized [Sn(9)Pt(2)(PPh(3))](1)(-) ion, and the protonated binary cluster anion [HSn(9)Pt(2)](1)(-). 2 is highly fluxional in solution giving rise to a single time-averaged (119)Sn NMR signal for all nine Sn atoms but the Pt atoms remain distinct. The exchange is intramolecular and is consistent with a rigid, linear Pt-Pt-PPh(3) rod embedded in a liquidlike Sn(9) matrix. [Sn(9)Ni(2)(CO)](3)(-) (3) was prepared from Ni(CO)(2)(PPh(3))(2), K(4)Sn(9), and 2,2,2-cryptand in en/toluene solvent mixtures. The [K(2,2,2-cryptand)](+) salt is very air and moisture sensitive, is paramagnetic, and has been characterized by ESI-MS, EPR, and single-crystal X-ray diffraction. Complex 3 is a 10-vertex 21-electron polyhedron, a slightly distorted closo-Sn(9)Ni cluster with an additional interstitial Ni atom and overall C(4)(v)() point symmetry. The EPR spectrum showed a five-line pattern due to 4.8-G hyperfine interactions involving all nine tin atoms. The ESI-MS analysis showed weak signals for the potassium complex [K(2)Sn(9)Ni(2)(CO)](1-) and the ligand-free binary ions [K(2)Sn(9)Ni(2)](1)(-), [KSn(9)Ni(2)](1)(-), and [HSn(9)Ni(2)](1)(-).     

Synthesis,spectral, thermal and structural characterization of {[Cu(H2O)3][Cu(MAL)2] · 2H2O}∞ and [Cu(MAL)(TEA)] · H2O (MAL = malonate and TEA = triethanolamine)

A polymeric malonato-bridged copper(II) complex, {[Cu(H₂O)₃][Cu(MAL)₂]· 2H₂O}, and a mononuclear malonato-copper(II) complex with triethanolamine, [Cu(MAL)(TEA)]·H₂O, have been prepared and characterized by elemental analyses, i.r., u.v.–vis, magnetic measurements and single crystal X-ray diffraction. The polymeric complex consists of one-dimensional chains containing the MAL bridged [Cu(H₂O)₃]²⁺ and [Cu(MAL)₂]^2– ions and each MAL ligand simultaneously exhibits chelating bidentate (at one copper atom) and bridging (at the adjacent copper atom) coordination modes. The intrachain Cu1...Cu2 separation is 4.963 Å and the polymeric complex exhibits antiferromagnetic behaviour. In the mononuclear complex, the copper(II) ion is octahedrally coordinated by one bidentate MAL and one tetradentate neutral TEA ligands. The i.r. spectra and thermal decompositions of both complexes are described.     

Amplified quenching of a conjugated polyelectrolyte by cyanine dyes

The conjugated polyelectrolyte PPESO3 features a poly(phenylene ethynylene) backbone substituted with anionic 3-sulfonatopropyloxy groups. PPESO3 is quenched very efficiently (KSV > 10(6) M(-1)) by cationic energy transfer quenchers in an amplified quenching process. In the present investigation, steady-state and picosecond time-resolved fluorescence spectroscopy are used to examine amplified quenching of PPESO3 by a series of cyanine dyes via singlet-singlet energy transfer. The goal of this work is to understand the mechanism of amplified quenching and to characterize important parameters that govern the amplification process. Steady-state fluorescence quenching of PPESO3 by three cationic oxacarbocyanine dyes in methanol solution shows that the quenching efficiency does not correlate with the Forster radius computed from spectral overlap of the PPESO3 fluorescence with the cyanines' absorption. The quenching efficiency is controlled by the stability of the polymer-dye association complex. When quenching studies are carried out in water where PPESO3 is aggregated, changes observed in the absorption and fluorescence spectra of 1,1',3,3,3',3'-hexamethylindotricarbocyanine iodide (HMIDC) indicate that the polymer templates the formation of a J-aggregate of the dye. The fluorescence dynamics in the PPESO3/HMIDC system were probed by time-resolved upconversion and the results show that PPESO3 to HMIDC energy transfer occurs on two distinctive time scales. At low HMIDC concentration, the dynamics are dominated by an energy transfer pathway with a time scale faster than 4 ps. With increasing HMIDC concentration, an energy pathway with a time scale of 0.1-1 ns is active. The prompt pathway (tau < 4 ps) is attributed to quenching of delocalized PPESO3 excitons created near the HMIDC association site, whereas the slow phase is attributed to intra- and interchain exciton diffusion to the HMIDC.     

Acrylic Terpolymer-Based Blends with Improved Properties

Blending of acrylic terpolymer (AT) with vinyl acetate-vinyl chloride (VAc-VC) copolymer, polyvinyl alcohol (PVA) polymer, and polyvinyl acetate (PVAc) polymer, respectively, resulted in sealant compositions with improved properties and enhanced outdoor weathering resistance. The morphology of these blends was studied by SEM, energy-dispersive x-ray analysis (EDXA), and DSC. The blends are heterogeneous and consist of a continuous phase which is either pure or mixed AT and a particulate phase having the morphology of the added component. The particulate phase of AT and AT-(VAc-VC) copolymer blends contains mixed AT, whereas that of AT-PVA and AT-PVAc does not. The AT-based blends have generally improved mechanical properties (e.g., ultimate tensile strength, adhesive strength). The improvement in mechanical properties is particularly strong in mixtures of AT with (VAc-VC) copolymer, probably because the added component has greater specific interaction capabilities with AT than the polymers incorporated in the other blends. Whereas the unblended AT has very low outdoor durability, the AT-based blends display enhanced resistance to weathering, as evidenced by substantially higher ultimate tensile strength of weathered specimens than those of the controls (unweathered).     

Synthesis,spectroscopic and crystal structure analysis of 2-(4-fluorobenzyl)-6-(4-methoxyphenyl)imidazo[2,1-b][1,3,4]thiadiazole and its morpholinomethyl derivative

The preparation of 2-(4-fluorobenzyl)-6-(4-methoxyphenyl)-5-morpholin-1-ylmethyl imidazo[2,1-b][1,3,4]thiadiazole via the intermediate 2-(4-fluorobenzyl)-6-(4-methoxyphenyl)Imidazo[2,1-b][1,3,4] thiadiazole is described. Elemental analysis, IR spectrum, ¹H NMR and X-ray crystal structure analyses were carried out to determine the compositions and molecular structures of the two compounds. The crystal packing exhibits intermolecular C–H?O, C–H?N, C–H?F and π–π stacking interactions leading to the formation of the supramolecular network.